The Project Gutenberg EBook of Getting Gold, by J. C. F. Johnson

This eBook is for the use of anyone anywhere at no cost and with
almost no restrictions whatsoever.  You may copy it, give it away or
re-use it under the terms of the Project Gutenberg License included
with this eBook or online at www.gutenberg.org


Title: Getting Gold

Author: J. C. F. Johnson

Release Date: April 12, 2006 [EBook #3679]

Language: English

Character set encoding: ASCII

*** START OF THIS PROJECT GUTENBERG EBOOK GETTING GOLD ***




Produced by Dagny; John Bickers





GETTING GOLD:

A PRACTICAL TREATISE

FOR PROSPECTORS, MINERS, AND STUDENTS.


By J. C. F. Johnson, F. G. S., MEMBER OF THE AUST. INST. OF MINING
ENGINEERS;

AUTHOR OF "PRACTICAL MINING," "THE GENESIOLOGY OF GOLD," ETC.



PREPARER'S NOTE

This text was prepared from a 1898 edition, published by Charles Griffin
& Company, Limited; Exeter Street, Strand, London. It is the second
edition, revised. Numerous drawings and diagrams have been omitted.




PREFACE

Some six years ago the author published a small book entitled "Practical
Mining," designed specially for the use of those engaged in the always
fascinating, though not as invariably profitable, pursuit of "Getting
Gold." Of this ten thousand copies were sold, nearly all in Australasia,
and the work is now out of print. The London _Mining Journal_ of
September 9th, 1891, said of it: "We have seldom seen a book in which so
much interesting matter combined with useful information is given in so
small a space."

The gold-mining industry has grown considerably since 1891, and it
appeared to the writer that the present would be a propitious time to
bring out a similar work, but with a considerably enlarged scope. What
has been aimed at is to make "Getting Gold" a compendium, in specially
concrete form, of useful information respecting the processes of winning
from the soil and the after-treatment of gold and gold ores,
including some original practical discoveries by the author. Practical
information, original and selected, is given to mining company
directors, mine managers, quartz mill operators, and prospectors. In
"Rules of Thumb," chapters XI. and XII., will be found a large number
of useful hints on subjects directly and indirectly connected with
gold-mining.

The author's mining experience extends back thirty years and he
therefore ventures to believe with some degree of confidence that the
information, original or compiled, which the book contains, will be
found both useful and profitable to those who are in any capacity
interested in the gold-mining industry.

J. C. F. J.

LONDON, November, 1896.





GETTING GOLD



CHAPTER I

INTRODUCTORY

GOLD is a name to charm by. It is desired by all nations, and is the one
metal the supply of which never exceeds the demand. Some one has aptly
said, "Gold is the most potent substance on the surface of our planet."
Tom Hood sings:

     Gold, gold, gold, gold!
     Bright and yellow, hard and cold;
     Molten, graven, hammered, rolled,
     Heavy to get, and light to hold;
     Stolen, borrowed, squandered, doled.

That this much appreciated metal is heavy to get is proved by the high
value which has been placed on it from times remote to date, and that it
is light to hold most of us know to our cost.

We read no farther than the second chapter in the Bible when we find
mention of gold. There Moses speaks of "the land of Havilah, where there
is gold"; and in Genesis, chapter xxiv., we read that Abraham's servant
gave Rebekah an earring of half a shekel weight, say 5 dwt. 13 grs.,
and "two bracelets of ten shekels weight," or about 4 1/2 ozs. Then
throughout the Scriptures, and, indeed, in all historic writings, we
find frequent mention of the king of metals, and always it is spoken of
as a commodity highly prized.

I have sometimes thought, however, that either we are mistaken in the
weights used by the Hebrew nation in early days, or that the arithmetic
of those times was not quite "according to Cocker." We read, I. Kings x.
and xli., that Solomon in one year received no less than six hundred
and three score and six talents of gold. If a talent of gold was, as has
been assumed, 3000 shekels of 219 grains each, the value of the golden
treasure accumulated in this one year by the Hebrew king would have been
3,646,350 pounds sterling. Considering that the only means of "getting
gold" in those days was a most primitive mode of washing it from river
sands, or a still more difficult and laborious process of breaking the
quartz from the lode without proper tools or explosives, and then slowly
grinding it by hand labour between two stones, the amount mentioned is
truly enormous.

Of this treasure the Queen of Sheba, who came to visit the Hebrew
monarch, contributed a hundred and twenty talents, or, say, 600,000
pounds worth. Where the Land of Ophir, whence this golden lady came, was
really situated has evoked much controversy, but there is now a general
opinion that Ophir was on the east coast of Africa, somewhere near
Delagoa Bay, in the neighbourhood of the Limpopo and Sabia rivers. It
should be mentioned that the name of the "black but comely" queen was
Sabia, which may or may not be a coincidence, but it is certainly true
that the rivers of this district have produced gold from prehistoric
times till now.

The discovery of remarkable ruins in the newly acquired province of
Mashonaland, which evince a high state of civilisation in the builders,
may throw some light on this interesting subject.

The principal value of gold is as a medium of exchange, and its high
appreciation is due, first, to the fact that it is in almost universal
request; and, secondly, to its comparative scarcity; yet, oddly enough,
with the exception of that humble but serviceable metal iron, gold is
the most widely distributed metal known. Few, if any, countries do not
possess it, and in most parts of the world, civilised and uncivilised,
it is mined for and brought to market. The torrid, temperate, and frigid
zones are almost equally auriferous. Siberia, mid-Asia, most parts of
Europe, down to equatorial and southern Africa in the Old World, and
north, central, and southern America, with Australasia, in what may be
termed the New World, are all producers of gold in payable quantities.

In the earlier ages, the principal source of the precious metal was
probably Africa, which has always been prolific in gold. To this day
there are to be seen in the southern provinces of Egypt excavations and
the remains of old mine buildings and appliances left by the ancient
gold-miners, who were mostly State prisoners. Some of these mines were
worked by the Pharaohs of, and before, the time of Moses; and in these
dreadful places thousands of Israelites were driven to death by the
taskmaster's whip. Amongst the old appliances is one which approximated
very closely to the amalgamating, or blanket table, of a modern quartz
mill.

The grinding was done between two stones, and possibly by means of such
primitive mechanism as is used to-day by the natives of Korea.

The Korean Mill is simply a large hard stone to which a rocking motion
is given by manual power by means of the bamboo handles while the ore is
crushed between the upper and basement stone.

Solomon says "there is no new thing under the sun"; certainly there is
much that is not absolutely new in appliances for gold extraction. I
lately learned that the principle of one of our newest concentrating
machines, the Frue vanner, was known in India and the East centuries
ago; and we have it on good authority--that of Pliny--that gold saving
by amalgamation with mercury was practised before the Christian era.
It will not be surprising then if, ere long, some one claims to have
invented the Korean Mill, with improvements.

Few subjects in mineralogical science have evoked more controversy than
the origin of gold. In the Middle Ages, and, indeed, down to the time
of that great philosopher, Sir Isaac Newton, who was himself bitten
with the craze, it was widely believed that, by what was known as
transmutation, the baser metals might be changed to gold; and much time
and trouble were expended in attempts to make gold--needless to say
without the desired result. Doubtless, however, many valuable additions
to chemical science, and also some useful metallic alloys, were thus
discovered.

The latest startling statement on this subject comes from, of course,
the wonderland of the world, America. In a recently published journal it
is said that a scientific metallurgist there has succeeded in producing
absolutely pure gold, which stands all tests, from silver. Needless
to say, if this were true, at all events the much vexed hi-metallic
question would be solved at once and for all time.

It is now admitted by all specialists that the royal metal, though
differing in material respects in its mode of occurrence from its
useful but more plebeian brethren of the mineral kingdom, has yet been
deposited under similar conditions from mineral salts held in solution.

The first mode of obtaining this much desired metal was doubtless by
washing the sand of rivers which flowed through auriferous strata. Some
of these, such as the Lydian stream, Pactolus, were supposed to renew
their golden stores miraculously each year. What really happened was
that the winter floods detached portions of auriferous drift from the
banks, which, being disintegrated by the rush and flow of the water,
would naturally deposit in the still reaches and eddies any gold that
might be contained therein.

The mode of washing was exactly that carried on by the natives in
some districts of Africa to-day. A wooden bowl was partly filled with
auriferous sand and mud, and, standing knee-deep in the stream, the
operator added a little water, and caused the contents of the bowl to
take a circular motion, somewhat as the modern digger does with his tin
dish, with this difference, that his ancient prototype allowed the water
and lighter particles to escape over the rim as he swirled the stuff
round and round. I presume, in finishing the operation, he collected
the golden grains by gently lapping the water over the reduced material,
much as we do now.

I have already spoken of the mode in which auriferous lode-stuff was
treated in early times--i.e., by grinding between stones. This is also
practised in Africa to-day, and we have seen that the Koreans, with
Mongolian acuteness, have gone a step farther, and pulverise the quartz
by rocking one stone on another. In South America the arrastra is still
used, which is simply the application of horse or mule power to the
stone-grinding process, with use of mercury.

The principal sources of the gold supply of the modern world have
been, first, South America, Transylvania in Europe, Siberia in Asia,
California in North America, and Australia. Africa has always produced
gold from time immemorial.

The later development in the Johannesburg district, Transvaal, which has
absorbed during the last few years so many millions of English capital,
is now, after much difficulty and disappointment--thanks to British
pluck and skill--producing splendidly. The yield for 1896 was 2,281,874
ounces--a yield never before equalled by lode-mining from one field.

In the year 1847 gold was discovered in California, at Sutor's sawmill,
Sacramento Valley, where, on the water being cut off, yellow specks and
small nuggets were found in the tail race. The enormous "rush" which
followed is a matter of history and the subject of many romances, though
the truth has, in this instance, been stranger than fiction.

The yield of the precious metal in California since that date up to 1888
amounts to 256,000,000 pounds.

Following close on the American discovery came that of Australia, the
credit of which has usually been accorded to Hargraves, a returned
Californian digger, who washed out payable gold at Lewis Ponds Creek,
near Bathurst, in 1851. But there is now no reason to doubt that gold
had previously been discovered in several parts of that great island
continent. It may be news to many that the first gold mine worked in
Australia was opened about twelve miles from Adelaide city, S.A., in the
year 1848. This mine was called the Victoria; several of the Company's
scrip are preserved in the Public Library; but some two years
previous to this a man named Edward Proven had found gold in the same
neighbourhood.

Most Governments nowadays encourage in every possible way the discovery
of gold-fields, and rewards ranging from hundreds to thousands of pounds
are given to successful prospectors of new auriferous districts. The
reward the New South Wales authorities meted out to a wretched convict,
who early in this century had dared to find gold, was a hundred lashes
vigorously laid on to his already excoriated back. The man then very
naturally admitted that the alleged discovery was a fraud, and that
the nugget produced was a melted down brass candlestick. One would have
imagined that even in those unenlightened days it would not have been
difficult to have found a scientist sufficiently well informed to put a
little nitric acid on the supposed nugget, and so determine whether it
was the genuine article, without skinning a live man first to ascertain.
My belief is that the unfortunate fellow really found gold, but, as Mr.
Deas Thompson, the then Colonial Secretary, afterwards told Hargraves in
discouraging his reported discovery, "You must remember that as soon
as Australia becomes known as a gold-producing country it is utterly
spoiled as a receptacle for convicts."

This, then, was the secret of the unwillingness of the authorities to
encourage the search for gold, and it is after all due to the fact
that the search was ultimately successful beyond all precedent,
that Australia has been for so many years relieved of the curse of
convictism, and has ceased once and for all to be a depot for the
scoundrelism of Britain--"Hurrah for the bright red gold!"

Since the year 1851 to date the value of the gold raised in the
Australasian colonies has realised the enormous amount of nearly
550,000,000 pounds. One cannot help wondering where it all goes.

Mulhall gives the existing money of the world at 2437 million pounds,
of which 846 millions are paper, 801 millions silver, and 790 millions
gold. From 1830 to 1880 the world consumed by melting down plate, etc.,
4230 tons of silver more than it mined. From 1800 to 1870 the value of
gold was about 15 1/2 times that of silver. From 1870 to 1880 it was 167
times the value of silver and now exceeds it over twenty times. In 1700
the world had 301 million pounds of money; in 1800, 568 million pounds;
and in 1860, 1180 million pounds sterling.

The gold first worked for in Australia, as in other places, was of
course alluvial, by which is usually understood loose gold in nuggets,
specks, and dust, lying in drifts which were once the beds of long
extinct streams and rivers, or possibly the moraines of glaciers, as in
New Zealand.

Further on the differences will be mentioned between "alluvial" and
"reef" or lode gold, for that there is a difference in origin in many
occurrences, is, I think, provable. I hold, and hold strongly, that true
alluvial gold is not always derived from the disintegration of lodes or
reefs. For instance, the "Welcome Nugget" certainly never came from a
reef. No such mass of gold, or anything approaching it, has ever yet
been taken from a quartz matrix. It was found at Bakery Hill, Ballarat,
in 1858, weight 2195 ozs., and sold for 10,500 pounds. This was above
its actual value.

The "Welcome Stranger," a still larger mass of gold, was found amongst
the roots of a tree at Dunolly, Victoria, in 1869, by two starved out
"fossickers" named Deeson and Oates. The weight of this, the largest
authenticated nugget ever found was 2268 1/2 ozs., and it was sold for
10,000 pounds, but it was rendered useless as a specimen by the finders,
who spent a night burning it to remove the adhering quartz.

But the ordinary digger neither hopes nor expects to unearth such
treasures as these. He is content to gather together by means of
puddling machine, cradle, long tom, or even puddling tub and tin dish,
the scales, specks, dust, and occasional small nuggets ordinarily met
with in alluvial "washes."

Having sunk to the "wash," or "drift," the digger, by means of one or
more of the appliances mentioned above, proceeds to separate the gold
from the clay and gravel in which it is found. Of course in large
alluvial claims, where capital is employed, such appliances are
superseded by steam puddles, buddles, and other machinery, and sometimes
mercury is used to amalgamate the gold when very fine. Hydraulicing is
the cheapest form of alluvial mining, but can only be profitably carried
out where extensive drifts, which can be worked as quarry faces, and
unlimited water exist in the same neighbourhood. When such conditions
obtain a few grains of gold to the yard or ton will pay handsomely.

Lode or reef mining, is a more expensive and complicated process,
requiring much skill and capital. First, let me explain what a lode
really is. The American term is "ledge," and it is not inappropriate or
inexpressive. Imagine then a ledge, or kerbstone, continuing to unknown
depths in the earth at any angle varying from perpendicular to nearly
horizontal. This kerbstone is totally distinct from the rocks which
enclose it; those on one side may be slate, on the other, sandstone; but
the lode, separated usually by a small band of soft material known
to miners as "casing," or "fluccan," preserves always an independent
existence, and in many instances is practically bottomless so far as
human exploration is concerned.

There are, however, reefs or lodes which are not persistent in depth.
Sometimes the lode formation is found only in the upper and newer
strata, and cuts out when, say, the basic rocks (such as granite, etc.)
are reached. Again, there is a form of lode known among miners as a
"gash" vein. It is sometimes met with in the older crystalline slates,
particularly when the lode runs conformably with the cleavage of the
rock.

Much ignorance is displayed on the subject of lode formation and the
deposition of metals therein, even by mining men of long experience.
Many still insist that lodes, particularly those containing gold, are of
igneous origin, and point to the black and brown ferro-manganic outcrops
in confirmation. It must be admitted that often the upper portions of
a lode present a strong appearance of fire agency, but exactly the same
appearance can be caused by oxidation of iron and manganese in water.

It may now be accepted as a proven fact that no true lode has been
formed, or its metals deposited except by aqueous action. That is to
say, the bulk of the lode and all its metalliferous contents were once
held in solution in subterranean waters, which were ejected by geysers
or simply filtered into fissures formed either by the shrinkage of the
earth's crust in process of cooling or by volcanic force.

It is not contended that the effect of the internal fires had no
influence on the formation of metalliferous veins, indeed, it is certain
that they had, but the action was what is termed hydrothermal (hot
water); and such action we may see in progress to-day in New Zealand,
where hot springs stream or spout above the surface, when the silica
and lime impregnated water, reduced in heat and released from pressure,
begins forthwith to deposit the minerals previously held in solution.
Hence the formation of the wondrous Pink and White Terrace, destroyed
by volcanic action some eight years since, which grew almost while
you watched; so rapidly was the silica deposited that a dead beetle or
ti-tree twig left in the translucent blue water for a few days became
completely coated and petrified.

Gold differs in its mode of occurrence from other metals in many
respects; but there is no doubt that it was once held in aqueous
solution and deposited in its metallic form by electro-chemical action.
It is true we do not find oxides, carbonates, or bromides of gold in
Nature, nor can we feel quite sure that gold now exists naturally as a
sulphide, chloride, or silicate, though the presumption is strongly
that it does. If so, the deposition of the gold may be ceaselessly
progressing.

Generally reef gold is finer as to size of the particles, and, as a
rule, inferior in quality to alluvial. Thus, in addition to the extra
labor entailed in breaking into one of the hardest of rocks, quartz,
the _madre de oro_ ("mother of gold") of the Spaniards, there is the
additional labour required to pulverise the rock so as to set free the
tiniest particles of the noble metal it so jealously guards. There is
also the additional difficult operation of saving and gathering together
these small specks, and so producing the massive cakes and bars of gold
in their marketable state.

Having found payable gold in quartz on the surface, the would-be miner
has next to ascertain two things. First, the strike or course of the
lode; and secondly, its underlie, or dip. The strike, or course, is the
direction which the lode takes lengthwise.

In Australia the term "underlie" is used to designate the angle from
the perpendicular at which the lode lies in its enclosing rocks, and by
"dip" the angle at which it dips or inclines lengthwise on its course.
Thus, at one point the cap of a lode may appear on the surface, and some
distance further the cap may be hundreds of feet below. Usually a shaft
is sunk in the reef to prove the underlie, and a level, or levels,
driven on the course to ascertain its direction underground, also if
the gold extends, and if so, how far. This being proved, next a vertical
shaft is sunk on the hanging or upper wall side, and the reef is either
tapped thereby, or a cross-cut driven to intersect it.

We will now assume that our miners have found their lode payable, and
have some hundreds of tons of good gold-bearing stone in sight or at the
surface. They must next provide a reducing plant. Of means for crushing
or triturating quartz there is no lack, and every year gives us fresh
inventions for the purpose, each one better than that which preceded
it, according to its inventor. Most practical men, however, prefer to
continue the use of the stamper battery, which is virtually a pestle
and mortar on a large scale. Why we adhere to this form of pulverising
machine is that, though somewhat wasteful of power, it is easily
understood, its wearing parts are cheaply and expeditiously replaced,
and it is so strong that even the most perversely stupid workman cannot
easily break it or put it out of order.

The stone, being pounded into sand of such degree of fineness as
the gold requires, passes through a perforated iron plate called a
"grating," or "screen," on to an inclined surface of copper plates faced
with mercury, having small troughs, or "riffles," containing mercury,
placed at certain distances apart.

The crushed quartz is carried over these copper "tables," as they are
termed, thence over the blanket tables--that is, inclined planes covered
with coarse serge, blankets, or other flocculent material--so that the
heavy particles may be caught in the hairs, or is passed over vanners or
concentrating machines. The resulting "concentrates" are washed off from
time to time and reserved for secondary treatment.

To begin with, they are roasted to get rid of the sulphur, arsenic,
etc., which would interfere with the amalgamation or lixiviation, and
then either ground to impalpable fineness in one of the many triturating
pans with mercury, or treated by chlorine or potassium cyanide.

If, however, we are merely amalgamating, then at stated periods the
battery and pans are cleaned out, the amalgam rubbed or scraped from
the copper plates and raised from the troughs and riffles. It is then
squeezed through chamois leather, or good calico will do as well, and
retorted in a large iron retort, the nozzle of which is kept in water so
as to convert the mercury vapour again to the metallic form. The result
is a spongy cake of gold, which is either sold as "retorted" gold or
smelted into bars.

The other and more scientific methods of extracting the precious metal
from its matrices, such as lixiviation or leaching, by means of solvents
(chlorine, cyanogen, hyposulphite of soda, etc.), will be more fully
described later on.



CHAPTER II

GOLD PROSPECTING--ALLUVIAL AND GENERAL

It is purposed in this chapter to deal specially with the operation of
searching for valuable mineral by individuals or small working parties.

It is well known that much disappointment and loss accrue through lack
of knowledge by prospectors, who with all their enterprise and energy
are often very ignorant, not only of the probable locality, mode of
occurrence, and widely differing appearance of the various valuable
minerals, but also of the best means of locating and testing the ores
when found. It is for the information of such as these that this chapter
is mainly intended, not for scientists or miners of large experience.

All of us who have had much to do with mining know that the majority of
the best mineral finds have been made by the purest accident; often
by men who had no mining knowledge whatever; and that many valuable
discoveries have been delayed, or, when made, abandoned as not payable,
from the same cause--ignorance of the rudiments of mineralogy and
mining. I have frequently been asked by prospectors, when inspecting new
mineral fields, what rudimentary knowledge will be most useful to them
and how it can be best obtained.

If a man can spare the time a course of lessons at some accredited
school of mines will be, undoubtedly, the best possible training; but
if he asks what books he should read in order to obtain some primary
technical instruction, I reply: First, an introductory text-book of
geology, which will tell him in the simplest and plainest language
all he absolutely requires to know on this important subject. Every
prospector should understand elementary geology so far as general
knowledge of the history of the structure of the earth's crust and of
the several actions that have taken place in the past, or are now in
operation, modifying its conditions. He may with advantage go a few
steps further and learn to classify the various formations into systems,
groups, and series: but he can acquire all that he need absolutely know
from this useful little 2s. 6d. book. Next, it is advisable to learn
something about the occurrence and appearance of the valuable minerals
and the formations in which they are found. For all practical purposes I
can recommend Cox and Ratte's "Mines and Minerals," one of the Technical
Education series of New South Wales, which deals largely with the
subject from an Australian standpoint, and is therefore particularly
valuable to the Australian miner, but which will be found applicable to
most other gold-bearing countries. I must not, however, omit to mention
an admirably compiled _multum in parvo_ volume prepared by Mr. G.
Goyder, jun., Government Assayer and Assay Instructor at the School of
Mines, Adelaide. It is called the "Prospectors' Pocketbook," costs only
one shilling, is well bound, and of handy size to carry. In brief, plain
language it describes how a man, having learned a little of assaying,
may cheaply provide himself with a portable assay plant, and fluxes, and
also gives considerable general information on the subject of minerals,
their occurrence and treatment.[*]

     [*] Another excellent and really practical book is Prof.
     Cole's "Practical Aids in Geology" (second edition), 10s.
     6d.

It may here be stated that some twelve years ago I did a large amount
of practical silver assaying on the Barrier (Broken Hill), which was not
then so accessible a place as it is now, and got closely correct results
from a number of different mines, with an extemporised plant almost
amusing in its simplicity. All I took from Adelaide were a small set of
scales capable of determining the weight of a button down to 20 ozs. to
the ton, a piece of cheese cloth to make a screen or sieve, a tin ring
1 1/2 in. diameter, by 1/2 in. high, a small brass door knob to use as
a cupel mould, and some powdered borax, carbonate of soda, and argol
for fluxes; while for reducing lead I had recourse to the lining of a
tea-chest, which lead contains no silver--John Chinaman takes good care
of that. My mortar was a jam tin, without top or bottom, placed on an
anvil; the pestle a short steel drill. The blacksmith at Mundi Mundi
Station made me a small wrought iron crucible, also a pair of bent tongs
from a piece of fencing-wire. The manager gave me a small common red
flower pot for a muffle, and with the smith's forge (the fire built
round with a few blocks of talcose schist) for a furnace, my plant was
complete. I burned and crushed bones to make my bone-dust for cupelling,
and thus provided made nearly forty assays, some of which were
afterwards checked in Adelaide, in each instance coming as close as
check assays generally do. Nowadays one can purchase cheaply a very
effective portable plant, or after a few lessons a man may by practice
make himself so proficient with the blowpipe as to obtain assay results
sufficiently accurate for most practical purposes.

Coming then to the actual work of prospecting. What the prospector
requires to know is, first, the usual locality of occurrence of the more
valuable minerals; secondly, their appearance; thirdly, a simple mode
of testing. With respect to occurrence, the older sandy and clay slates,
chlorite slates, micaceous, and hornblendic schists, particularly at or
near their junction with the intrusive granite and diorite, generally
form the most likely geological country for the finding of mineral
lodes, particularly gold, silver and tin. But those who have been
engaged in practical mining for long, finding by experience that no two
mineral fields are exactly alike in all their characteristics, have come
to the conclusion that it is unwise to form theories as to why metals
should or should not be found in certain enclosing rocks or matrices.
Some of the best reef gold got in Victoria has been obtained in dead
white, milky-looking quartz almost destitute of base metal. In South
Australia reef gold is almost invariably associated with iron, either
as oxide, as "gossan;" or ferruginous calcite, "limonite;" or granular
silica, conglomerated by iron, the "ironstone" which forms the capping
or outcrop of many of our reefs, and which is often rich in gold.

But to show that it is unsafe to decide off-hand in what class of matrix
metals will or will not be found, I may say that in my own experience I
have seen payable gold in the following materials:--

Quartz, dense and milky, also in quartz of nearly every colour and
appearance, saccharoidal, crystalline, nay, even in clear glass-like
six-sided prismatic crystals, and associated with silver, copper, lead,
arsenic, iron as sulphide, oxide, carbonate, and tungstate, antimony,
bismuth, nickel, zinc, lead, and other metals in one form or another;
in slate, quartzite, mica schist, granite, diorite, porphyry, felsite,
calcite, dolomite, common carbonate of iron, siliceous sinter from a hot
spring, as at Mount Morgan; as alluvial gold in drifts formed of almost
all these materials; and once, perhaps the most curious matrix of all,
a small piece of apparently alluvial gold, naturally imbedded in a shaly
piece of coal. This specimen, I think, is in the Sydney Museum. One
thing, however, the prospector may make sure of: he will always find
gold more or less intimately associated with silica (Quartz) in one or
other of its many forms, just as he will always find cassiterite (oxide
of tin) in the neighbourhood of granite containing muscovite (white
mica), which so many people will persist in terming talc. It is stated
to be a fact that tin has never been found more than about two miles
from such granite.

From what has been said of its widely divergent occurrences it will be
admitted that the Cornish miners' saying with regard to metals generally
applies with great force to gold: "Where it is, there it is": and
"Cousin Jack" adds, with pathetic emphasis, "and where it is generally,
there I ain't."

I have already spoken of the geological "country rock" in which red gold
is most likely to be discovered--i.e., the junction of the slates and
schists with the igneous or metamorphic (altered) rocks, or in
this vicinity. Old river beds formed of gravelly drifts in the same
neighbourhood may probably contain alluvial gold, or shallow deposits of
"wash" on hillsides and in valleys will often carry good surface gold.
This is sometimes due to the denudation, or wearing away, of the hills
containing quartz-veins--that is, where the alluvial gold really was
derived from such veins, which, popular opinion to the contrary, is not
always the case.

Much disappointment and loss of time and money may sometimes be
prevented if prospectors will realise that _all_ alluvial gold does not
come from the quartz veins or reefs; and that following up an alluvial
lead, no matter how rich, will not inevitably develop a payable
gold lode. Sometimes gold, evidently of reef origin, is found in the
alluvial; but in that case it is generally fine as regards the size
of the particles, more or less sharp-edged, or crystalline in form if
recently shed; while such gold is often of poorer quality than the true
alluvial which occurs in mammillary (breast-like) nuggets, and is of a
higher degree of purity as gold.

The ordinary non-scientific digger will do well to give credence to
this view of the case, and will often thereby save himself much useless
trouble. Sometimes also the alluvial gold, coarser in size than true
reef-born alluvial, is derived almost _in situ_ from small quartz
"leaders," or veins, which the grinding down of the face of the slates
has exposed; these leaders in time being also broken and worn, set free
the gold they have contained, which does not, as a rule, travel far, but
sometimes becomes water-worn by the rubbing over it of the disintegrated
fragments of rock.

But the heavy, true alluvial gold, in great pure masses, mammillary, or
botryoidal (like a bunch of grapes) in shape, have assuredly been
formed by accretion on some metallic base, from gold salts in solution,
probably chloride, but possibly sulphide.

Nuggets, properly so-called, are never found in quartz lodes; but, as
will be shown later, a true nugget having all the characteristics of
so-called water-worn alluvial may be artificially formed on a small
piece of galena, or pyrites, by simply suspending the base metal by a
thread in a vessel containing a weak solution of chloride of gold in
which a few hard-wood chips are thrown.

Prospecting for alluvial gold at shallow depths is a comparatively easy
process, requiring no great amount of technical knowledge. Usually the
first gold is got at or near the surface and then traced to deep leads,
if such exist.

At Mount Brown Goldfield, N.S.W., in 1881, I saw claimholders turning
out to work equipped only with a small broom made of twigs and a tin
dish. With the broom they carefully swept out the crevices of the
decomposed slate as it was exposed on the surface, and putting the
resulting dust and fragments into the tin dish proceeded to dry blow it.

The _modus operandi_ is as follows: The operator takes the dish about
half full of dirt, and standing with his back or side to the wind, if
there be any, begins throwing the stuff up and catching it, or sometimes
slowly pouring it from one dish to another, the wind in either case
carrying away the finer particles. He then proceeds to reduce the
quantity by carefully extracting the larger fragments of rock, till
eventually he has only a handful or so of moderately fine "dirt" which
contains any gold there may be. If in good sized nuggets it is picked
out, if in smaller pieces or fine grains the digger slowly blows the
sand and dust aside with his breath, leaving the gold exposed. This
process is both tedious and unhealthy, and of course can only be carried
out with very dry surface dirt. The stuff in which the gold occurred at
Mount Brown was composed of broken slate with a few angular fragments
of quartz. Yet, strange to say, the gold was invariably waterworn in
appearance.

Dry blowing is now much in vogue on the West Australian fields owing
to the scarcity of water; but the great objection is first, the large
amount of dust the unfortunate dry blower has to carry about his person,
and secondly, that the peck of dirt which is supposed to last most men a
life time has to be made a continuous meal of every day.

For wet alluvial prospecting the appliances, besides pick and shovel,
are puddling tub, tin dish, and cradle; the latter, a man handy with
tools can easily make for himself.

In sinking, the digger should be careful to avoid making his shaft
inconveniently small, and not to waste his energy by sinking a large
"new chum" hole, which usually starts by being about three times too
large for the requirements at the surface, but narrows in like a funnel
at 10 feet or less. A shaft, say 4 feet by 2 feet 6 inches and sunk
plumb, the ends being half rounded, is large enough for all requirements
to a considerable depth, though I have seen smart men, when they were in
a hurry to reach the drift, get down in a shaft even less in size.

The novice who is trying to follow or to find a deep lead must fully
understand that the present bed of the surface river may not, in fact
seldom does, indicate the ancient watercourses long since buried either
by volcanic or diluvial action, which contain the rich auriferous
deposits for which he is seeking; and much judgment and considerable
underground exploration are often required to decide on the true
course of leads. Only by a careful consideration of all the geological
surroundings can an approximate idea be obtained from surface inspection
alone; and the whole probable conditions which led to the present
contour of the country must be carefully taken into account.

How am I to know the true bottom when I see it? asks the inexperienced
digger. Well, nothing but long experience and intelligent observation
will prevent mistakes at times, particularly in deep ground; but as a
general rule, though it may sound paradoxical, you may know the bottom
by the top.

That is, we will assume you are sinking in, say, 10 to 12 feet ground in
a gully on the bank of which the country rock is exposed, and is, say,
for instance, a clay slate or sandy slate set at a certain angle; then,
in all probability, unless there be a distinct fault or change in the
country rock between the slate outcrop and your shaft, the bottom will
be a similar slate, standing at the same angle; and this will
very probably be overlaid by a deposit of pipeclay, formed by the
decomposition of the slates.

From the crevices of these slates, sometimes penetrating to a
considerable distance, you may get gold, but it is useless attempting to
sink through them. If the outcropping strata be a soft calcareous (limy)
sandstone or soft felspathic rock, and that be also the true bottom,
great care should be exercised or one is apt to sink through the bottom,
which may be very loose and decomposed. I have known mistakes made in
this way when many feet have been sunk, and driven through what was
actually bed rock, though so soft as to deceive even men of experience.
The formation, however, must be the guide, and except in some specially
difficult cases, a man can soon tell when he is really on bed rock or
"bottom."

On an alluvial lead the object of every one is to "get on the gutter,"
that is, to reach the lowest part of the old underground watercourse,
through which for centuries the gold may have been accretionising from
the percolation of the mineral-impregnated water; or, when derived from
reefs or broken down leaders, the flow of water has acted as a natural
sluice wherein the gold is therefore most thickly collected. Sometimes
the lead runs for miles and is of considerable width, at others it is
irregular, and the gold-bearing "gutter" small and hard to find. In many
instances, for reasons not readily apparent, the best gold is not found
exactly at the lowest portion of these narrow gutters, but a little
way up the sides. This fact should be taken into consideration in
prospecting new ground, for many times a claim has been deserted after
cleaning up the "bottom," and another man has got far better gold
considerably higher up on the sides of the gutter. For shallow alluvial
deposits, where a man quickly works out his 30 by 30 feet claim, it may
be cheaper at times to "paddock" the whole ground--that is, take all
away from surface to bottom, but if he is in wet ground and he has to
drive, great care should be taken to properly secure the roof by means
of timber. How this may best be done the local circumstances only can
decide.



CHAPTER III

LODE OR REEF PROSPECTING

The preceding chapter dealt more especially with prospecting as carried
on in alluvial fields. I shall now treat of preliminary mining on lodes
or "reefs."

As has already been stated, the likeliest localities for the occurrence
of metalliferous deposits are at or near the junction of the older
sedimentary formations with the igneous or intrusive rocks, such as
granites, diorites, etc. In searching for payable lodes, whether of
gold, silver, copper, or even tin in some forms of occurrence, the
indications are often very similar. The first prospecting is usually
done on the hilltops or ridges, because, owing to denudation by ice or
water which have bared the bedrock, the outcrops are there more exposed,
and thence the lodes are followed down through the alluvial covered
plains, partly by their "strike" or "trend," and sometimes by other
indicating evidences, which the practical miner has learned to know.

For instance, a lesson in tracing the lode in a grass covered country
was taught me many years ago by an old prospector who had struck good
gold in the reef at a point some distance to the east of what had been
considered the true course. I asked him why he had opened the ground in
that particular place. Said he, "Some folks don't use their eyes. You
stand here and look towards that claim on the rise where the reef was
last struck. Now, don't you see there is almost a track betwixt here and
there where the grass and herbage is more withered than on either side?
Why? Well, because the hard quartz lode is close to the surface all the
way, and there is no great depth of soil to hold the moisture and make
the grass grow."

I have found this simple lesson in practical prospecting of use since.
But the strike or course of a quartz reef is more often indicated by
outcrops, either of the silica itself or ironstone "blows," as the
miners call them, but the term is a misnomer, as it argues the easily
disproved igneous theory of veins of ejection, meaning thereby that the
quartz with its metalliferous contents was thrown out in a molten state
from the interior of the earth. This has in no case occurred, and the
theory is an impossible one. True lodes are veins of injection formed
by the infiltration of silicated waters carrying the metals also in
solution. This water filled the fissures caused either by the cooling of
the earth's crust, or formed by sudden upheavals of the igneous rocks.

Sometimes in alluvial ground the trend of the reef will be revealed by
a track of quartz fragments, more or less thickly distributed on the
surface and through the superincumbent soil. Follow these along, and at
some point, if the lode be continuous, a portion of its solid mass will
generally be found to protrude and can then again be prospected.

There is no rule as to the trend or strike of lodes, except that a
greater number are found taking a northerly and southerly course than
one which is easterly and westerly. At all events, such is the case in
Australia, but it cannot be said that either has the advantage in being
more productive. Some of the richest mines in Australasia have been in
lodes running easterly and westerly, while gold, tin, and copper, in
great quantity and of high percentage to the ton, have been got in such
mines as Mount Morgan, Mount Bischoff, and the Burra, where there are no
lodes properly so-called at all.

Mount Morgan is the richest and most productive gold mine in Australasia
and amongst the best in the world.

Its yield for 1895 was 128,699 oz. of gold, valued at 528,700 pounds.
Dividends paid in 1895, 300,000 pounds.

This mine was opened in 1886. Up to May 31, 1897, the total yield was
1,631,981 ozs. of gold, sold at 6,712,187 pounds, from which 4,400,000
pounds have been paid in dividends. (See _Mining Journal_, for Oct. 9,
1897.)

Mount Morgan shareholders have, in other words, divided over 43 1/2 tons
of standard gold.

The Burra Burra Mine, about 100 miles from Adelaide, in a direction
a little to the east of north, was found in 1845 by a shepherd named
Pickett. It is singularly situated on bald hills standing 130 feet above
the surrounding country. The ores obtained from this copper mine had
been chiefly red oxides, very rich blue and green carbonates, including
malachite, and also native copper. The discovery of this mine,
supporting, as it did at one time, a large population, marked a new
era in the history of the colony. The capital invested in it was 12,320
pounds in 5 pound shares, and no subsequent call was ever made upon the
shareholders. The total amount paid in dividends was 800,000 pounds.
After being worked by the original owners for some years the mine was
sold to a new company, but during the last few years it has not been
worked, owing in some degree to the low price of copper and also to the
fact that the deposit then being worked apparently became exhausted.
For many years the average yield was from 10,000 to 13,000 tons of ore,
averaging 22 to 23 per cent of copper. It is stated that, during the
twenty-nine and a half years in which the mine was worked, the company
expended 2,241,167 in general expenses. The output of ore during the
same period amounted to 234,648 tons, equal to 51,622 tons of copper.
This, at the average price of copper, amounted to a money value of
4,749,224 pounds. The mine stopped working in 1877.

Mount Bischoff, Tasmania, has produced, since the formation of the
Company to December 1895, 47,263 tons of tin ore. It is still in full
work and likely to be for years to come.

Each of these immense metalliferous deposits was found outcropping on
the summit of a hill of comparatively low altitude. There are no true
walls nor can the ore be traced away from the hill in lode form. These
occurrences are generally held to be due to hydrothermal or geyser
action.

Then again lodes are often very erratic in their course. Slides and
faults throw them far from their true line, and sometimes the lode is
represented by a number of lenticular (double-pointed in section) masses
of quartz of greater or less length, either continuing point to point or
overlapping, "splicing," as the miners call it. Such formations are very
common in West Australia. All this has to be considered and taken into
account when tracing the run of stone.

This tyro also must carefully remember that in rough country where the
lode strikes across hills and valleys, the line of the cap or outcrop
will apparently be very sinuous owing to the rises and depressions of
the surface. Many people even now do not understand that true lodes or
reefs are portions of rock or material differing from the surrounding
and enclosing strata, and continuing down to unknown depths at varying
angles. Therefore, if you have a north and south lode outcropping on
a hill and crossing an east and west valley, the said lode, underlying
east, when you have traced its outcrop to the lowest point in the
valley, between the two hills, will be found to be a greater or less
distance, according to the angle of its dip or underlie, to the east of
the outcrop on the hill where it was first seen. If it be followed up
the next hill it will come again to the west, the amount of apparent
deviation being regulated by the height of the hills and depth of the
valley.

A simple demonstration will make this plain. Take a piece of half-inch
pine board, 2 ft. long and 9 in. wide, and imagine this to be a lode;
now cut a half circle out of it from the upper edge with a fret saw and
lean the board say at an angle of 45 degrees to the left, look along the
top edge, which you are to consider as the outcrop on the high ground,
the bottom of the cut being the outcrop in the valley, and it will be
seen that the lowest portion of the cut is some inches to the right; so
it is with the lode, and in rough country very nice judgment is required
to trace the true course.

For indications, never pass an ironstone "blow" without examination.
Remember the pregnant Cornish saying with regard to mining and the
current aphorism, "The iron hat covers the golden head." "Cousin Jack,"
put it "Iron rides a good horse." The ironstone outcrop may cover a
gold, silver, copper or tin lode.

If you are searching for gold, the presence of the royal metal should be
apparent on trial with the pestle and mortar; if silver, either by sight
in one of its various forms or by assay, blowpipe or otherwise; copper
will reveal itself by its peculiar colour, green or blue carbonates, red
oxides, or metallic copper. It is an easy metal to prospect for, and
its percentage is not difficult to determine approximately. Tin is more
difficult to identify, as it varies so greatly in appearance.

Having found your lode and ascertained its course, you want next
to ascertain its value. As a rule (and one which it will be well to
remember) if you cannot find payable metal, particularly in gold "reef"
prospecting, at or near the surface, it is not worth while to sink,
unless, of course, you design to strike a shoot of metal which some one
has prospected before you. The idea is exploded that auriferous lodes
necessarily improve in value with depth. The fact is that the metal in
any lode is not, as a rule, equally continuous in any direction, but
occurs in shoots dipping at various angles in the length of the lode, in
bunches or sometimes in horizontal layers. Nothing but actual exploiting
with pick, powder, and brains, particularly brains, will determine this
point.

Where there are several parallel lodes and a rich shoot has been found
in one and the length of the payable ore ascertained, the neighbouring
lodes should be carefully prospected opposite to the rich spot, as often
similar valuable deposits will thus be found. Having ascertained that
you have, say, a gold reef payable at surface and for a reasonable
distance along its course, you next want to ascertain its underlie or
dip, and how far the payable gold goes down.

As a general rule in many parts of Australia--though by no means an
inflexible rule--a reef running east of north and west of south will
underlie east; if west of north and east of south it will go down to the
westward and so round the points of the compass till you come to east
and west; when if the strike of the lodes in the neighbourhood has
come round from north-east to east and west the underlie will be to the
south; if the contrary was the case, to the north. It is surprising how
often this mode of occurrence will be found to obtain. But I cannot too
strongly caution the prospector not to trust to theory but to prove his
lode and his metal by following it down on the underlie. "Stick to your
gold" is an excellent motto. As a general thing it is only when the
lode has been proved by an underlie shaft to water level and explored by
driving on its course for a reasonable distance that one need begin to
think of vertical shafts and the scientific laying out of the mine.

A first prospecting shaft need not usually be more than 5 ft. by 3 ft.
or even 5 ft. by 2 ft. 6 in., particularly in dry country. One may often
see in hard country stupid fellows wasting time, labour, and explosives
in sinking huge excavations as much as 10 ft. by 8 ft. in solid rock,
sometimes following down 6 inches of quartz.

When your shaft is sunk a few feet, you should begin to log up the top
for at least 3 ft. or 4 ft., so as to get a tip for your "mullock"
and lode stuff. This is done by getting a number of logs, say 6 inches
diameter, lay one 7 ft. log on each side of your shaft, cut two notches
in it 6 ft. apart opposite the ends of the shaft, lay across it a 5 ft.
log similarly notched, so making a frame like a large Oxford picture
frame. Continue this by piling one set above another till the desired
height is attained, and on the top construct a rough platform and erect
your windlass. If you have an iron handle and axle I need not tell
you how to set up a windlass, but where timber is scarce you may put
together the winding appliance described in the chapter headed "Rules of
Thumb."

If you have "struck it rich" you will have the pleasure of seeing your
primitive windlass grow to a "whip," a "whim," and eventually to a
big powerful engine, with its huge drum and Eiffel tower-like "poppet
heads," or "derrick," with their great spindle pulley wheels revolving
at dizzy speed high in air.

"How shall I know if I have payable gold so as to save time and trouble
in sinking?" says the novice. Truly it is a most important part of the
prospector's art, whether he be searching for alluvial or reef gold,
stream or lode tin, copper, or other valuable metal.

I presume you know gold when you see it?

If you don't, and the doubtful particle is coarse enough, take a needle
and stick the point into the questionable specimen. If gold the steel
point will readily prick it; if pyrites or yellow mica the point will
glance off or only scratch it.

The great importance of the first prospect from the reef is well shown
by the breathless intensity with which the two bearded, bronzed pioneer
prospectors in some trackless Australian wild bend over the pan in which
the senior "mate" is slowly reducing the sample of powdered lode stuff.
How eagerly they examine the last pinch of "black sand" in the corner
of the dish. Prosperity and easy times, or poverty and more "hard graft"
shall shortly be revealed in the last dexterous turn of the pan. Let us
hope it is a "pay prospect."

The learner, if he be far afield and without appliances of any kind, can
only guess his prospect. An old prospector will judge from six ounces of
stuff within a few pennyweights what will be the yield of a ton. I have
seen many a good prospect broken with the head of a pick and panned in
a shovel, but for reef prospecting you should have a pestle and mortar.
The handiest for travelling is a mortar made from a mercury bottle cut
in half, and a not too heavy wrought iron pestle with a hardened face.
To be particular you require a fine screen in order to get your stuff
to regulated fineness. The best for the prospector, who is often on the
move, is made from a piece of cheesecloth stretched over a small hoop.

If you would be more particular take a small spring balance or an
improvised scale, such as is described in Mr. Goyder's excellent little
book, p. 14, which will enable you to weigh down to one-thousandth of a
grain. It is often desirable to burn your stone before crushing, as
it is thus more easily triturated and will reveal all its gold; but
remember, that if it originally contained much pyrites, unless a similar
course is adopted when treated in the battery, some of the gold will be
lost in the pyrites.

Having crushed your gangue to a fine powder you proceed to pan it off in
a similar manner to that of washing out alluvial earth, except that in
prospecting quartz one has to be much more particular, as the gold is
usually finer. The pan is taken in both hands, and enough water to cover
the prospect by a few inches is admitted. The whole is then swirled
round, and the dirty water poured off from time to time till the residue
is clean quartz sand and heavy metal. Then the pan is gently tipped, and
a side to side motion is given to it, thus causing the heavier contents
to settle down in the corner. Next the water is carefully lapped in over
the side, the pan being now tilted at a greater angle until the lighter
particles are all washed away. The pan is then once more righted, and
very little water is passed over the pinch of heavy mineral a few times,
when the gold will be revealed in a streak along the bottom. In this
operation, as in all others, only practice will make perfect, and a few
practical lessons are worth whole pages of written instruction.

To make an amalgamating assay that will prove the amount of gold which
can be got from a ton of your lode, take a number of samples from
different parts, both length and breadth. The drillings from the
blasting bore-holes collected make the best test. When finely triturated
weigh off one or two pounds, place in a black iron pan (it must not be
tinned), with 4 ozs. of mercury, 4 ozs. salt, 4 ozs. soda, and about
half a gallon of boiling water; then, with a stick, stir the pulp
constantly, occasionally swirling the dish as in panning off, till you
feel certain that every particle of the gangue has come in contact with
the mercury; then carefully pan off into another dish so as to lose no
mercury. Having got your amalgam clean squeeze it through a piece of
chamois leather, though a good quality of new calico previously wetted
will do as well. The resulting pill of hard amalgam can then be wrapped
in a piece of brown paper, placed on an old shovel, and the mercury
driven off over a hot fire; or a clay tobacco pipe, the mouth being
stopped with clay, makes a good retort (see "Rules of Thumb," pipe and
potato retorting). The residue will be retorted gold, which, on being
weighed and the result multiplied by 2240 for a 1 lb. assay, or by
1120 for 2 lb., will give the amount of gold per ton which an ordinary
battery might be expected to save. Thus 1 grain to the pound, 2240 lbs.
to the ton, would show that the stuff contained 4 oz. 13 dwt. 8 gr. per
ton.

If there should be much base metal in your sample such as say
stibnite (sulphide of antimony), a most troublesome combination to the
amalgamator--instead of the formula mentioned above add to your
mercury about one dwt. of zinc shavings or clippings, and to your water
sufficient sulphuric acid to bring it to about the strength of vinegar
(weaker, if anything, not stronger), place your material preferably in
an earthenware or enamelled basin if procurable, but iron will do, and
intimately mix by stirring and shaking till all particles have had an
opportunity to combine with the mercury. Retort as before described.
This device is my own invention.

The only genuine test after all is the battery, and that, owing to
various causes, is often by no means satisfactory. First, there is a
strong, almost unconquerable temptation to select the stone, thus making
the testing of a few tons give an unduly high average; but more often
the trouble is the other way. The stuff is sent to be treated at some
inefficient battery with worn-out boxes, shaky foundations, and uneven
tables, sometimes with the plates not half amalgamated, or coated with
impurities, the whole concern superintended by a man who knows as little
about the treatment of auriferous quartz by the amalgamating or any
other processes as a dingo does of the differential calculus. Result:
3 dwt. to the ton in the retort, 30 dwt. in the tailings, and a payable
claim declared a "duffer."

When the lode is really rich, particularly if it be carrying coarse
gold, and owing to rough country, or distance, a good battery is not
available, excellent results in a small way may be obtained by the
somewhat laborious, but simple, process of "dollying." A dolly is a
one man power single stamp battery, or rather an extra sized pestle and
mortar (see "Rules of Thumb").

Silver lodes and lodes which frequently carry more or less gold,
are often found beneath the dark ironstone "blows," composed of
conglomerates held together by ferric and manganic oxides; or, where
the ore is galena, the surface indications will frequently be a whitish
limey track sometimes extending for miles, and nodules or "slugs" of
that ore will generally be found on the surface from place to place.
Most silver ores are easily recognisable, and readily tested by means of
the blowpipe or simple fire assay. Sometimes the silver on being tested
is found to contain a considerable percentage of gold as in the great
Comstock lode in Nevada. Ore from the big Broken Hill silver load, New
South Wales, also contains an appreciable quantity of the more precious
metal. A natural alloy of gold containing 20 per cent silver, termed
electrum, is the lowest grade of the noble metal.

Tin, lode, and stream, or alluvial, occurs only as an oxide, termed
cassiterite, and yet you can well appreciate the compliment one Cornish
miner pays to another whose cleverness he wishes to commend, when he
says of him, "Aw, he do know tin," when you look at a representative
collection of tin ores. In various shapes, from sharp-edged crystals to
mammillary-shaped nuggets of wood-tin; from masses of 30 lbs. weight to
a fine sand, like gunpowder, in colour black, brown, grey, yellow,
red, ruby, white, and sometimes a mingling of several colours, it does
require much judgment to know tin.

Stream tin is generally associated with alluvial gold. When such is the
case there is no difficulty in saving the gold if you save the tin, for
the yellow metal is of much greater specific gravity. As the natural tin
is an oxide, and therefore not susceptible to amalgamation, the gold can
be readily separated by means of mercury.

Lode tin sometimes occurs in similar quartz veins to those in which gold
is got, and is occasionally associated with gold. Tin is also found, as
at Eurieowie, in dykes, composed of quartz crystals and large scales
of white mica, traversing the older slates. A similar occurrence
takes place at Mount Shoobridge and at Bynoe Harbour, in the Northern
Territory of South Australia; indeed, one could not readily separate
the stone from these three places if it were mixed. As before stated tin
will never be found far from granite, and that granite must have white
mica as one of its constituents. It is seldom found in the darker
coloured rocks, or in limestone country, but it sometimes occurs in
gneiss, mica schist, and chlorite schist. Numerous other minerals are
at times mistaken for tin, the most common of which are tourmaline or
schorl, garnet, wolfram (which is a tungstate of iron with manganese),
rutile or titanic acid, blackjack or zinc blende, together with
magnetic, titanic, and specular iron in fine grains.

This rough and ready mode of determining whether the ore is tin is by
weight and by scratching or crushing, when, what is called the "streak"
is obtained. The colour of the tin streak is whitey-grey, which, when
once known, is not easily mistaken. The specific gravity is about 7.0.
Wolfram, which is most like it, is a little heavier, from 7.0 to 7.5,
but its streak is red, brown, or blackish-brown. Rutile is much lighter,
4.2, and the streak light-brown; tourmaline is only 3.2. Blackjack is
4.3, and its streak yellowish-white.

I have seen several pounds weight to the dish got in some of the New
South Wales shallow sinking tin-fields, and, as a rule, payable gold was
also present. Fourteen years ago I told Western Australian people, when
on a visit to that colony, that the neighbourhood of the Darling range
would produce rich tin. Lately this had been proved to be the case, and
I look forward to a great development of the tin mining industry in the
south-western portion of Westralia.

The tin "wash" in question may also contain gold, as the country rock of
the neighbourhood is such as gold is usually found in.[*]

     [*] Since this book was in the printers' hands, the
     discovery of payable gold has been reported from this
     district. A detailed discussion of methods of prospecting
     will be found in chapter ii. Of Le Neve Foster's "Ore and
     Stone Mining," and Mr. S. Herbert Cox's "Handbook for
     Prospectors."




CHAPTER IV

THE GENESIOLOGY OF GOLD--AURIFEROUS LODES

Up to a comparatively recent time it was considered heretical for any
one to advance the theory that gold had been deposited where found by
any other agency than that of fire. As late as 1860 Mr. Henry Rosales
convinced himself, and apparently the Victorian Government also,
that quartz veins with their enclosed metal had been ejected from
the interior of the earth in a molten state. His essay, which is very
ingenious and cleverly written, obtained a prize which the Government
had offered, but probably Mr. Rosales himself would not adduce the
same arguments in support of the volcanic or igneous theory to-day. His
phraseology is very technical; so much so that the ordinary inquirer
will find it somewhat difficult to follow his reasoning or understand
his arguments, which have apparently been founded only on the occurrence
of gold in some of the earlier discovered quartz lodes, and the
conclusions at which he arrived are not borne out by later experience.
He says:--"While, however, there are not apparent signs of mechanical
disturbances, during the long period that elapsed from the cooling
of the earth's surface to the deposition of the Silurian and Cambrian
systems, it is to be presumed that the internal igneous activity of the
earth's crust was in full force, so that on the inner side of it, in
obedience to the laws of specific gravity, chemical attraction, and
centrifugal force, a great segregation of silica in a molten state
took place. This molten silica continually accumulating, spreading,
and pressing against the horizontal Cambro-Silurian beds during a long
period at length forced its way through the superincumbent strata in all
directions; and it is abundantly evident, under the conditions of this
force and the resistance offered to its action, that the line it would
and must choose would be along any continuous and slightly inclined
diagonal, at times crossing the strata of the schists, though generally
preferring to develop itself and egress between the cleavage planes and
dividing seams of the different schistose beds."

He goes on to say, "Another argument to the same end (i.e., the igneous
origin) may be shown from the fact that the auriferous quartz lodes have
exercised a manifest metamorphic action on the adjacent walls or casing;
they have done so partly in a mineralogical sense, but generally there
has been a metamorphic alteration of the rock." Mr. Rosales then tells
his readers, what we all know must be the case, that the gold would be
volatilised by the heat, as would be also the other metals, which he
says, were in the form of arseniurets and sulphurets; but he fails to
explain how the sublimated metals afterwards reassumed their metallic
form. Seeing that, in most cases, they would be hermetically enclosed in
molten and quickly solidifying silica they could not be acted on to
any great extent by aqueous agency. Neither does Mr. Rosales's theory
account at all for auriferous lodes; which below water level are
composed of a solid mass of sulphide of iron with traces of other
sulphides, gold, calcspar, and a comparatively small percentage of
silica. Nor will it satisfactorily explain the auriferous antimonial
silica veins of the New England district, New South Wales, in which
quantities of angular and unaltered fragments of slate from the
enclosing rocks are found imbedded in the quartz.

With respect to the metamorphism of the enclosing rocks to a greater
degree of hardness, which Mr. Rosales considered was due to heat, it
should be remembered that these rocks in their original state were much
softer and more readily fusible than the quartz, consequently all would
have been molten and mingled together instead of showing as a rule
clearly defined walls. It is much more rational to suppose that the
increased hardness imparted to the slates and schists at or near their
contact with the lode is due to an infiltration of silica from the
silicated solution which at one time filled the fissure. Few scientists
can now be found to advance the purely igneous theory of lode formation,
though it must be admitted that volcanic action has probably had much
influence not only in the formation of mineral veins, but also on the
occurrence of the minerals therein. But the action was hydrothermal,
just such as was seen in course of operation in New Zealand a few years
ago when, in the Rotomahana district, one could actually see the growing
of the marvellous White and Pink Terraces formed by the release of
silica from the boiling water exuding from the hot springs, which water,
so soon as the heat and pressure were removed, began to deposit its
silica very rapidly; while at the Thames Gold-field, in the same country
hot, silicated water continuously boiled out of the walls of some of
the lodes after the quartz had been removed and re-deposited a siliceous
sinter thereon.

On this subject I note the recently published opinions of Professor
Lobley, a gentleman whose scientific reputation entitles his utterances
to respect, but who, when he contends that gold is not found in the
products of volcanic action is, I venture to think, arguing from
insufficient premises. Certainly his theories do not hold good either in
Australasia or America where gold is often, nay, more usually, found at,
or near, either present or past regions of volcanic action.

It is always gratifying to have one's theories confirmed by men whose
opinions carry weight in the scientific world. About seventeen years ago
I first published certain theories on gold deposition, which, even then,
were held by many practical men, and some scientists, to be open to
question. Of late years, however, the theory of gold occurrence by
deposition from mineral salts has been accepted by all but the "mining
experts" who infest and afflict the gold mining camps of the world.
These opine that gold ought to occur in "pockets" only (meaning thereby
their own).

Recently Professor Joseph Le Conte, at a meeting of the American
Institute of Mining Engineers, criticised a notable essay on the
"Genesis of Ore Deposits," by Bergrath F. Posepny. The Professor's
general conclusions are:

1. "Ore deposits, using the term in its widest sense, may take place
from any kinds of waters, but especially from alkaline solutions, for
these are the natural solvents of metallic sulphides, and metallic
sulphides are usually the original form of such deposits."

2. "They may take place from waters at any temperature and any pressure,
but mainly from those at high temperature and under heavy pressure,
because, on account of their great solvent power, such waters are
heavily freighted with metals."

3. "The depositing waters may be moving in any direction, up-coming,
horizontally moving, or even sometimes down-going, but mainly up-coming;
because by losing heat and pressure at every step such waters are sure
to deposit abundantly."

4. "Deposits may take place in any kind of waterways--in open fissures,
in incipient fissures, joints, cracks, and even in porous sandstone, but
especially in great open fissures, because these are the main highways
of ascending waters from the greatest depths."

5. "Deposits may be found in many regions and in many kinds of rocks,
but mainly in mountain regions, and in metamorphic and igneous rocks,
because the thermosphere is nearer the surface, and ready access thereto
through great fissures is found mostly in these regions and in these
rocks."

These views are in accordance with nearly all modern research into this
interesting and fruitful subject.

Among the theories which they discredit is that ore bodies may usually
be assumed to become richer in depth. As applied to gold lodes the
teaching of experience does not bear out this view.

If it be taken into account that the time in which most of our
auriferous siliceous lodes were formed was probably that indicated in
Genesis as before the first day or period when "the earth was without
form and void, and darkness was upon the face of the deep," it will be
realised that the action we behold now taking place in a small way in
volcanic regions, was probably then almost universal. The crust of the
earth had cooled sufficiently to permit water to lie on its surface,
probably in hot shallow seas, like the late Lake Rotomahana. Plutonic
action would be very general, and volcanic mud, ash, and sand would be
ejected and spread far and wide, which, sinking to the bottom of the
water, may possibly be the origin of what we now designate the azoic or
metamorphic slates and schists, as also the early Cambrian and Silurian
strata. These, from the superincumbent weight and internal heat, became
compacted, and, in some cases, crystallised, while at the same time,
from the ingress of the surface waters to the heated regions below,
probably millions of geysers were spouting their mineral impregnated
waters in all directions; and in places where the crust was thin,
explosions of super-heated steam caused huge upheavals, rifts, and
chasms, into which these waters returned, to be again ejected, or to
be the cause of further explosions. Later, as the cooling-process
continued, there would be shrinkages of the earth's crust causing other
fissures; intrusive granites further dislocated and upheaved the slates.
About this age, probably, when really dry land began to appear, came the
first formation of mineral lodes, and the waters, heavily charged with
silicates, carbonates of lime, sulphides, etc., in solution, commenced
to deposit their contents in solid form when the heat and pressure were
removed.

I am aware that part of the theory here propounded as to the probable
mode of formation of the immense sedimentary beds of the Archaic or
Azoic period is not altogether orthodox--i.e., that the origin of
these beds is largely due to the ejection of mud, sand, and ashes from
subterraneous sources, which, settling in shallow seas, were afterwards
altered to their present form. It is difficult, however, to believe that
at this very early period of geologic history so vast a time had elapsed
as would be required to account for these enormous depositions of
sediment, if they were the result only of the degradation of previously
elevated portions of the earth's surface by water agency. Glacial action
at that time would be out of the question.

But what about the metals? Whence came the metallic gold of our reefs
and drifts? What was it originally--a metal or a metallic salt, and if
the latter, what was its nature?--chloride, sulphide, or silicate, one,
or all three? I incline to the latter hypothesis. All three are known,
and the chemical conditions of the period were favorable for their
natural production. Assuming that they did exist, the task of
accounting for the mode of occurrence of our auriferous quartz lodes is
comparatively simple. Chloride of gold is at present day contained in
sea water and in some mineral waters, and would have been likely to be
more abundant during the Azoic and early Paleozoic period.

Sulphide of gold would have been produced by the action of sulphuretted
hydrogen; hence probably our auriferous pyrites lodes, while silicate
of gold might have resulted from a combination of gold chlorides with
silicic acid, and thus the frequent presence of gold in quartz is
accounted for.

A highly interesting and instructive experiment, showing how gold might
be, and probably was, deposited in quartz veins, was carried out by
Professor Bischof some years ago. He, having prepared a solution of
chloride of gold, added thereto a solution of silicate of potash,
whereupon, as he states, the yellow colour of the chloride disappeared,
and in half an hour the fluid turned blue, and a gelatinous dark-blue
precipitate appeared and adhered to the sides of the vessel. In a
few days moss-like forms were seen on the surface of the precipitate,
presumably approximating to what we know as dendroidal gold--that
is, having the appearance of moss, fern, or twigs. After allowing the
precipitate to remain undisturbed under water for a month or two a
decomposition took place, and in the silicate of gold specks of metallic
gold appeared. From this, the Professor argues, and with good show of
reason, that as we know now that the origin of our quartz lodes was
the silicates contained in certain rocks, it is probable that a natural
silicate of gold may be combined with these silicates. If this can be
demonstrated, the reason for the almost universal occurrence of gold in
quartz is made clear.

About 1870, Mr. Skey, analyst to the New Zealand Geological Survey
Department, made a number of experiments of importance in respect to
the occurrence of gold. These experiments were summarised by Sir James
Hector in an address to the Wellington Philosophical Society in 1872.
Mr. Skey's experiments disproved the view generally held that gold is
unaffected by sulphur or sulphuretted hydrogen gas, and showed that
these elements combined with avidity, and that the gold thus treated
resisted amalgamation with mercury. Mr. Skey proved the act of
absorption of sulphur by gold to be a chemical act, and that electricity
was generated in sufficient quantity and intensity during the process
to decompose metallic solutions. Sulphur in certain forms had long been
known to exercise a prejudicial effect upon the amalgamation of gold,
but this had always been attributed to the combination of the sulphur
with the quicksilver used. Now, however, it is certain that the
sulphurising of the gold must be taken into account. We must remember
that the particles of gold in the stone may be enveloped with a film
of auriferous sulphide, by which they are protected from the solvent
actions of the mercury. The sulphurisation of the gold gives no ocular
manifestation by change of colour or perceptible increase of weight,
as in the case of the formation of sulphides of silver, lead and other
metals, on account of the extremely superficial action of the sulphur,
and hence probably the existence of the gold sulphide escaped detection
by chemists.

Closely allied to this subject is the investigation of the mode in which
certain metals are reduced from their solutions by metallic sulphides,
or, in common language, the influence which the presence of such
substances as mundic and galena may exercise in effecting the deposit
of pure metals, such as gold, in mineral lodes. The close relation which
the richness of gold veins bears to the prevalence of pyrites has been
long familiar both to scientific observers and to practical miners. The
gold is an after deposit to the pyrites, and, as Mr. Skey was the
first to explain, due to its direct reducing influences. By a series of
experiments Mr. Skey proved that the reduction of the metal was due to
the direct action of the sulphide, and showed that each grain of iron
pyrites, when thoroughly oxidised, will reduce 12 1/4 grains of gold
from its solution as chloride. He also included salts of platina and
silver in this general law, and demonstrated that solutions of any of
these metals traversing a vein rock containing certain sulphides would
be decomposed, and the pure metal deposited. We are thus enabled to
comprehend the constant association of gold, or native alloys of gold
and silver, in veins which traverse rocks containing an abundance
of pyrites, whether they have been formed as the result of either
sub-aqueous volcanic outburst or by the metamorphism of the
deeper-seated strata which compose the superficial crust of the earth.

Mr. Skey also showed by very carefully conducted experiments that the
metallic sulphides are not only better conductors of electricity than
has hitherto been supposed, but that when paired they were capable of
exhibiting strong electro-motive power. Thus, if galena and zinc blende
in acid solutions be connected in the usual manner by a voltaic pair,
sulphuretted hydrogen is evolved from the surface of the former, and a
current generated which is sufficient to reduce gold, silver or copper
from their solutions in coherent electro-plate films. The attributing
of this property of generating voltaic currents, hitherto supposed to
be almost peculiar to metals, to such sulphides as are commonly found
in metalliferous veins, further led Mr. Skey to speculate how far the
currents discovered to exist in such veins by Mr. E. F. Fox might be
produced by the gradual oxidation of mixed sulphides, and that veins
containing bands of different metallic sulphides, bounded by continuing
walls, and saturated with mineral waters, may constitute under
some circumstances a large voltaic battery competent to produce
electro-deposition of metals, and that the order of the deposit of these
mineral lodes will be found to bear a definite relation to the order
in which the sulphides rank in the table of their electro-motive power.
These researches may lead to some clearer comprehension of the law which
regulates the distribution of auriferous veins, and may explain why in
some cases the metal should be nearly pure, while in others it is so
largely alloyed with silver.

The following extract was lately clipped from a mining paper. If true,
the experiment is interesting:--

"An American scientist has just concluded a very interesting and
suggestive experiment. He took a crushed sample of rich ore from Cripple
Creek, which carried 1100 ozs. of gold per ton, and digested it in a
very weak solution of sodium chloride and sulphate of iron, making
the solution correspond as near as practicable to the waters found in
Nature. The ore was kept in a place having a temperature little less
than boiling water for six weeks, when all the gold, except one ounce
per ton, was found to have gone into solution. A few small crystals of
pyrite were then placed in the bottle of solution, and the gold began
immediately to precipitate on them. It was noticeable, however, that the
pyrite crystals which were free from zinc, galena, or other extraneous
matter received no gold precipitate. Those which had such foreign
associations were beautifully covered with fine gold crystals."

Experimenting in a somewhat similar direction abut twelve months since,
I found that the West Australian mine water, with the addition of an
acid, was a solvent of gold. The idea of boiling it did not occur to me,
as the action was rapid in cold water.

Assuming, then, that gold originally existed as a mineral salt, when and
how did it take metallic form? Doubtless, just in the same manner as
we now (by means of well-known reagents which are common in nature)
precipitate it in the laboratory. With regard to that found in quartz
lodes finely disseminated through the gangue, the change was brought
about by the same agency which caused the silicic acid to solidify and
take the form in which we now see it in the quartz veins. Silica is
soluble in solutions of alkaline carbonates, as shown in New Zealand
geysers; the solvent action being increased by heat and pressure, so
also would be the silicate or sulphide of gold. When, however, the
waters with their contents were released from internal pressure and
began to lose their heat the gold would be precipitated together with
the salts of some other metals, and would, where the waters could
percolate, begin to accretionise, thus forming the heavy or specimen
gold of some reefs. On this class of deposition I shall have more to say
when treating of the origin of alluvial gold in the form of nuggets.

Mr. G. F. Becker, of the United States Geological Survey, writing of
the geology of the Comstock lode, says:--"Baron Von Richthofen was of
opinion that fluorine and chlorine had played a large part of the ore
deposition in the Comstock, and this the writer is not disposed to
deny; but, on the other hand, it is plain that most of the phenomena are
sufficiently accounted for on the supposition that the agents have been
merely solutions of carbonic and hydro-sulphuric acids. These reagents
will attack the bisilicates and felspars. The result would be carbonates
and sulphides of metals, earth, alkalies, and free quartz, but quartz
and sulphides of the metals are soluble in solutions of carbonates and
sulphides of the earths and alkalies, and the essential constituents of
the ore might, therefore, readily be conveyed to openings in the
vein where they would have been deposited on relief of pressure and
diminution of temperature. An advance boring on the 3000 ft. level of
the Yellow Jacket struck a powerful stream of water at 3065 ft. (in the
west country), which was heavily charged with hydrogen sulphide, and
had a temperature of 170 degrees F., and there is equal evidence of the
presence of carbonic acid in the water of the lower levels. A spring on
the 2700 ft. level of the Yellow Jacket which showed a temperature
of about 150 degrees F., was found to be depositing a sinter largely
composed of carbonates."

It may be worth while here to speak of the probable reason why gold, and
indeed almost all the metals generally occur in shutes in the lodes; and
why, as is often the case, these shutes are found to be more or less in
a line with each other in parallel lodes, and why also the junction of
two lodes is frequently specially productive. The theory with respect
to these phenomena which appears most feasible is, that at these points
certain chemical action has taken place, by which the deposition of the
metals has been specially induced. Generally a careful examination of
the enclosing rocks where the shute is found will reveal some points of
difference from the enclosing rocks at other parts of the course of the
lode, and when ore shutes are found parallel in reefs running on the
same course, bands or belts of similar country rock will be found at the
productive points. From this we may fairly reason that at these points
the slow stream filling the lode cavity met with a reagent percolating
from this particular band of rock, which caused the deposition of
its metals; and, indeed, I am strongly disposed to believe that the
deposition of metals, particularly in some loose lodes, may even now be
proceeding. But as in Nature's laboratory the processes, if certain, are
slow, this theory may be difficult to prove.

Why the junction of lodes is often found to be more richly metalliferous
than neighbouring parts is probably because there the depositing
reagents met. This theory is well put by Mr. S. Herbert Cox, late of
Sydney, in his useful book, "Mines and Minerals." He says:--"It is a
well-known fact in all mining districts that the junctions of lodes are
generally the richest points, always supposing that this junction takes
place in 'kindly country,' and the explanation of this we think is
simple on the aqueous theory of filling of lodes. The water which is
traversing two different channels of necessity passes through different
belts of country, and will thus have different minerals in solution. As
a case in point, let us suppose that the water in one lode contained in
solution carbonates of lime, and the alkalies and silica derived form
a decomposition of felspars; and that the other, charged with
hydro-sulphuric acid, brought with it sulphide of gold dissolved in
sulphide of lime. The result of these two waters meeting would be that
carbonate of lime would be formed, hydro-sulphuric acid would be set
free, and sulphide of gold would be deposited, as well as silica, which
was formerly held in solution by the carbonic acid."

Most practical men who have given the subject attention will, I think,
be disposed to coincide with this view, though there are some who hold
that the occurrence of these parallel ore shutes and rich deposits at
the junctions of lodes is due to extraneous electrical agency. Of this,
however I have failed to find any satisfactory evidence.

There is, however, proof that lodes are actually re-forming and the
action observed is very interesting as showing how the stratification
in some lodes has come about. Instances are not wanting of the growth of
silica on the sides of the drives in mines. This was so in some of the
mines on the Thames, New Zealand, previously mentioned, where in some
cases the deposition was so rapid as to be noticeable from day to day,
whilst the big pump was actually choked by siliceous deposits. In old
auriferous workings which have been under water for years, in many parts
of the world, formations of iron and silica have been found on the
walls and roof, while in mining tunnels which have been long unused
stalactites composed of silica and calcite have formed. Then, again,
experiments made by the late Professor Cosmo Newbery, in Victoria,
showed that a distinctly appreciable amount of gold, iron, and silica
(the latter in granular form) could be extracted from solid mine timber;
which had been submerged for a considerable time.

This reaction then must be in progress at the present time, and
doubtless under certain conditions pyrites would eventually take
the place of the timber, as is the case with some of the long buried
driftwood found in Victorian deep leads. Again, we know that the water
from some copper mines is so charged with copper sulphate that if scrap
iron be thrown into it, the iron will be taken up by the sulphuric acid,
and metallic copper deposited in its place. All this tends to prove that
the deposition of metals from their salts, though probably not now
as rapid as formerly, is still ceaselessly going on in some place or
another where the necessary conditions are favourable.

With regard to auriferous pyritic lodes, it does not appear even now to
be clear, as some scientists assert, that their gold is never found
in chemical combination with the sulphides of the base metals. On the
contrary, I think much of the evidence points in the other direction.

I have long been of opinion that it is really so held in many of the
ferro-sulphides and arsenio-ferro sulphides. On this subject Mr. T.
Atherton contributed a short article in 1891 to the _Australian Mining
Standard_ which is worthy of notice. He says, referring to an occurrence
of a Natural Sulphide of Gold: "The existence of gold, in the form of
a natural sulphide in conjunction with pyrites, has often been advanced
theoretically, as a possible occurrence; but up to the present time
has, I believe, never been established as an actual fact. During my
investigation on the ore of the Deep Creek mines, Nambucca, New South
Wales, I have found in them what I believe to be gold existing as a
natural sulphide. The lode is a large irregular one of pure arsenical
pyrites carrying, in addition to gold and silver, nickel and cobalt. It
exists in a felsite dyke immediately on the coast. Surrounding it on all
sides are micaceous schists, and in the neighbourhood about half a mile
distant is a large granite hill about 800 feet high. In the lode and its
walls are large quantities of pyro-phyllite, and in some parts of the
mine there are deposits of pure white translucent mica, but in the ore
itself it is a yellow or pale olive green, and is never absent from the
pyrites.

"From the first I was much struck with the exceedingly fine state of
division in which the gold existed in the ore. After roasting and very
carefully grinding down in an agate mortar, I have never been able to
get any pieces of gold exceeding one-thousandth of an inch in diameter,
and the greater quantity is very much finer than this. Careful
dissolving of the pyrites and gangue so as to leave the gold intact
failed to find it in any larger diameter. As this was a very unusual
experience in investigations on many other kinds of pyrites, I was led
further into the matter.

"Ultimately, after a number of experiments, there was nothing left but
to test for gold existing as a natural sulphide. Taking 200 gr. of ore
from a sample assaying 17 oz. fine gold per ton, grinding it finely and
heating for some hours with yellow sodium sulphide--on decomposing the
filtrate and treating for gold I got a result at the rate of 12 oz. per
ton. This was repeated several times with the same result.

"This sample came from the lode at the 140 ft. level, whilst samples
from the higher levels where the ore is more oxidised, although carrying
the gold in exactly the same degree of fineness, do not give as high a
percentage of auric sulphide.

"It would appear that all the gold in the pyrites (and I have never
found any gold existing apart from the pyrites) has originally taken its
place there as a sulphide."

Professor Newbery, who made many valuable suggestions on the subject,
says, speaking of gold in pyritous lodes:

"As it (the gold salt) may have been in the same solution that
deposited the pyrites, which probably contained its iron in the form of
proto-carbonate with sulphates, it was not easy at first to imagine any
ordinary salt of gold; but this I find can be accomplished with very
dilute solutions in the presence of an alkaline carbonate and a large
excess of carbonic acid, both of which are common constituents of
mineral waters, especially in Victoria. This is true of chloride of
gold, and if the sulphide is required in solution, it is only necessary
to charge the solution with an excess of sulphuretted hydrogen. In this
matter both sulphides may be retained in the same solution, depositing
gradually with the escape of the carbonic acid."

Pyritic lodes usually contain a considerable proportion of calcareous
matter, mostly carbonates, and consequently it appears not improbable
that the gold may remain in some instances as a sulphide, particularly
in samples of pyrites, in which it cannot be detected even by the
microscope until by calcination the iron sulphide is changed to an
oxide, wherein the gold may be seen in minute metallic specks. The whole
subject is full of interest, and careful scientific investigation may
lead to astonishing results.



CHAPTER V

THE GENESIOLOGY OF GOLD--AURIFEROUS DRIFTS

Having considered the origin of auriferous lodes, and the mode by which
in all probability the gold was conveyed to them and deposited as a
metal, it is necessary also to inquire into the derivation of the gold
of our auriferous drifts, and the reasons for its occurrence therein.

When quite a lad on the Victorian alluvial fields, I frequently heard
old diggers assert that gold grew in the drifts where found. At the time
we understood this to mean that it grew like potatoes; and, although not
prepared with a scientific argument to prove that such was not so, the
idea was generally laughed at. I have lived to learn that these old
hard-heads were nearer the truth than possibly they clearly realised,
and that gold does actually grow or agglomerate; and, indeed, is
probably even now thus growing, though it is likely that the chemical
and electric action in the mineral waters flowing through the drifts is
not in this age nearly so active as formerly.

Most boys have tried the experiment of dipping a clean-bladed knife into
sulphate of copper, and so depositing on the steel a film of copper,
which adheres closely until worn away. This is a simple demonstration
of a hydro-metallurgical process, though probably young hopeful is not
aware of the fact; and it is really by an enlargement of this process
that our beautiful and artistic gold-and silver-plated ware is produced.

In the great laboratory of Nature similar chemical depositions have
taken place in the past, and may still be in progress; indeed, there is
sound scientific reason to suppose that in certain localities this is
even now the case, and that in this way much of our so-called alluvial
gold has been formed, that is, by the deposition on metallic bases of
the gold held in solution.

We will, however, take, to begin with, the generally accepted theory as
to the occurrence of alluvial gold. First, let it be said, that certain
alluvial gold is unquestionably derived from the denudation of quartz
lodes. Such is the gold dust found in many Asiatic and African rivers,
in the great placer mines of California, as also the gold dust gained
from the beach sand on the west coast of New Zealand, or in the enormous
alluvial drifts of the Shoalhaven Valley, New South Wales. Of the
first, many fabulous tales are told to account for its being found in
particular spots each summer after the winter floods, and miraculous
agency was asserted, while the early beachcombers of the Hokitika
district found an equally ridiculous derivation for their gold, which
was always more plentiful after heavy weather. They imagined that the
breakers were disintegrating some abnormally rich auriferous reefs out
at sea, and that the resultant gold was washed up on the beach.

The facts are simply, with regard to the rivers, that the winter floods
break down the drifts in the banks and agitate the auriferous detritus,
thus acting as natural sluices, and cause the metal to accumulate
in favourable spots; whilst on the New Zealand coast the heavy seas
breaking on the shingly beach, carry off the lighter particles, leaving
behind the gold, which is so much heavier. These beaches are composed,
as also are the "terraces" behind, of enormous glacial and fluvial
deposits, all containing more or less gold, and extend inland to the
foot of the mountains.

It is almost certain that the usually fine gold got by hydraulicing in
Californian canyons, in the gullies of the New Zealand Alps, and the
great New South Wales drifts, is largely the result of the attrition of
the boulders and gravel of moraines, which has thus freed, to a certain
extent, the auriferous particles. But when we find large nuggety masses
of high carat gold in the beds of dead rivers, another origin has to be
sought.

As previously stated, there is fair reason to assume that at least
three salts of gold have existed, and, possibly, may still be found in
Nature--silicate, sulphide, and chloride. All of these are soluble and
in the presence of certain reagents, also existing naturally, can be
deposited in metallic form. Therefore, if, as is contended, reef
gold was formed with the reefs from solutions in mineral waters, by
inferential reasoning it can be shown that much of our alluvial gold was
similarly derived.

The commonly accepted theory, however, is that the alluvial matter of
our drifts has been ground out of the solid siliceous lodes by glacial
and fluvial action, and that the auriferous leads have been formed by
the natural sluicing operations of former streams. To this, however,
there are several insuperable objections.

First, how comes it that alluvial gold is usually superior in purity to
the "reef" gold immediately adjacent? Second, why is it that masses of
gold, such as the huge nuggets found in Victoria and New South Wales,
have never been discovered in lodes? Third, how is it that these heavy
masses which, from their specific gravity, should be found only at the
very bottom of the drifts, if placed by water action, are sometimes
found in all positions from the surface to the bottom of the "wash"?
And, lastly, why is it that when an alluvial lead is traced up to, or
down from, an auriferous reef, that the light, angular gold lies close
to the roof, while the heavy masses are often placed much farther away?
Any one who has worked a ground sluice knows how extremely difficult it
is with a strong head of water to shift from its position an ounce
of solid gold. What, then, would be the force required to remove the
Welcome Nugget? Under certain circumstances, Niagara would not be equal
to the task.

The generally smooth appearance of alleged alluvial gold is adduced
as an argument in favour of its having been carried by water from its
original place of deposit, and thus in transit become waterworn; while
some go so far as to say that it was shot out of the reefs in a molten
state. The latter idea has been already disposed of, but if not, it may
be dismissed with the statement that the heat which would melt silica
in the masses met with in lodes would sublimate any gold contained, and
dissipate it, not in nuggets but in fumes. With regard to the assumed
waterworn appearance of alluvial gold, I have examined with the
microscope the smooth surface of more than one apparently waterworn
nugget, and found that it was not scratched and abraded, as would have
been the case had it been really waterworn, but that it presented the
same appearance, though infinitely finer in grain, as the surface of a
piece of metal fresh from the electrical plating-bath.

Mr. Daintree, of the Victorian Geological Survey, many years ago
discovered accidentally that gold chloride would deposit its metal on
a metallic base in the presence of any organic substance. Mr. Daintree
found that a piece of undissolved gold in a bottle containing chloride
of gold in solution had, owing to a portion of the cork having fallen
into the liquid, grown or accretionised so much that it could not be
extracted through the neck. This lead Mr. Charles Wilkinson, who
has contributed much to our scientific knowledge of metallurgy, to
experiment further in the same direction. He says: "Using the most
convenient salt of gold, the terchloride, and employing wood as the
decomposing agent, in order to imitate as closely as possible the
organic matter supposed to decompose the solution circulating through
the drifts, I first immersed a piece of cubic iron pyrites taken from
the coal formation of Cape Otway, far distant from any of our gold
rocks, and therefore less likely to contain gold than other pyrites. The
specimen (No. 1) was kept in dilute solution for about three weeks, and
is completely covered with a bright film of gold. I afterwards filed off
the gold from one side of a cube crystal to show the pyrites itself and
the thickness of the surrounding coating, which is thicker than ordinary
notepaper. If the conditions had continued favourable for a very
lengthened period, this specimen would doubtless have formed the nucleus
of a large nugget. Iron, copper, and arsenical pyrites, antimony,
galena, molybdenite, zinc blende, and wolfram were treated in the above
manner with similar results. In the above experiments a small chip of
wood was employed as the decomposing agent. In one instance I used a
piece of leather. All through the wood and leather gold was disseminated
in fine particles, and when cut through the characteristic metallic
lustre was brightly reflected. The first six of these sulphides were
also operated upon simply in the solution without organic matter; but
they remained unaltered."

Wilkinson found that when the solution of gold chloride was as strong
as, say, four grains to the ounce of water, that the pyrites or other
base began to decompose, and the iron sulphide changed to yellow oxide,
the "gossan" of our lodes, and that though the gold was deposited,
this occurred in an irregular way, and it was coated with a dark brown
powdery film something like the "black gold," often found in drifts
containing much ferruginous matter. Such were the curious Victorian
nuggets Spondulix and Lothair.

Professor Newbery also made a number of similar experiments, and arrived
at like results. He states as follows: "I placed a cube of galena in
a solution of chloride of gold, with free access of air, and put in
organic matter; gold was deposited as usual, in a bright metallic film,
apparently completely coating the cube. After a few months the film
burst along the edges of the cube, and remained in that state with
the cracks open without any further alteration in size or form being
apparent. Upon removing it a few days ago and breaking it open, I found
that a large portion of the galena had been decomposed, forming chloride
and sulphate of lead and free sulphur, which were mixed together,
encasing a small nucleus of undecomposed sulphate of lead. The formation
of these salts had exerted sufficient force to burst open the gold
coating, which upon the outside had the mammillary form noticed by
Wilkinson, while the inside was rough and irregular with crystals
forcing their way into the lead salts. Had this action continued
undisturbed, the result would have been a nugget with a nucleus of
lead salts, or if there had been a current to remove the results of
decomposition, a nugget without a nucleus of foreign matter."

But Newbery also made another discovery which still further establishes
the probability of the accretionary growth of gold in drifts. In the
first experiments both investigators used organic substances as the
reagent to cause the deposit of gold on its base, and in each case these
substances whether woodchips, leather, or even dead flies, were found
to be so absolutely impregnated with gold as to leave a golden skeleton
when afterwards burned. Timber found in the Ballarat deep leads has been
proved to be similarly impregnated.

Newbery found that gold could also be deposited on sulphurets without
any other reagent. He says: "In our mineral sulphurets, however, we
have agents which are not only capable of reducing gold and silver from
solution, but besides are capable of locating them when so reduced in
coherent and bulky masses. Thus the aggregation of the nuggety forms of
gold from solution becomes a still more simple matter, only one
reagent being necessary, so that there is a greater probability of such
depositions obtaining than were a double process necessary. Knowing the
action of sulphides, the manner or the mode of formation of a portion at
least of these nuggets seems apparent. Conceive a stream or river fed
by springs rising in a country intersected by auriferous reefs, and
consequently in this case carrying gold in solution; the drift of such
a country must be to a greater or lesser extent pyritous, so that the
_debris_ forming the beds of these streams or rivers will certainly
contain nodules of such matters disseminated or even stopping them in
actual contact with the flow of water. It follows, then, from what has
been previously affirmed, that there will be a reduction of gold by
these nodules, and that the metal thus reduced will be firmly attached
to them, at first in minute spangles isolated from each other, but
afterwards accumulating and connecting in a gradual manner at that point
of the pyritous mass most subject to the current until a continuous film
of some size appears. This being formed the pyrites and gold are to a
certain extent polarised, the film or irregular but connected mass of
gold forming the negative, and the pyrites the positive end of a voltaic
pair; and so according as the polarisation is advanced to completion
the further deposition of gold is changed in its manner from an
indiscriminate to an orderly and selective deposition concentrated
upon the negative or gold plate. The deposition of gold being thus
controlled, its loss by dispersion or from the crumbling away of the
sustaining pyrites is nearly or quite prevented, a conservative effect
which we could scarcely expect to obtain if organic matter were the
reducing agent. Meanwhile there is a gradual wasting away of the pyrites
or positive pole, its sulphur being oxidised to sulphuric acid and its
iron to sesquioxide of iron, or hematite, a substance very generally
associated with gold nuggets. According to the original size of the
pyritous mass, the protection it receives from the action of oxidising
substances other than gold, the strength of the gold solution, length of
exposure to it, the rate of supply and velocity of stream, will be the
size of the gold nugget. As to the size of a pyritous mass necessary to
produce in this manner a large nugget, it is by no means considerable.
A mass of common pyrites (bisulphide of iron) weighing only 12 lbs.
is competent for the construction of the famous 'Welcome Nugget,' an
Australian find having weight equal to 152 lbs. avoirdupois. Such masses
of pyrites are by no means uncommon in our drifts or the beds of our
mountain streams. Thus we find that no straining of the imagination is
required to conceive of this mode of formation for the huge masses of
gold found in Australia in particular, such as the Welcome Nugget,
184 lbs. 9 oz.; the Welcome Stranger, a surface nugget, 190 lbs. after
smelting; the Braidwood specimen nugget, 350 lbs., two-thirds gold;
besides many other large masses of almost virgin gold which have been
obtained from time to time in the alluvial diggings."

The author has made a number of experiments in the same direction, but
more with the idea of demonstrating how possibly gold may in certain
cases have been deposited in siliceous formations after such formations
had solidified. Some of the results were remarkable and indeed
unexpected. I found that I could produce artificial specimens of
auriferous quartz from stone which had previously contained no gold
whatever, also that it was not absolutely necessary that the stone so
treated should contain any metallic sulphides.

The following was contributed by the author and is from the
"Transactions" of the Australasian Institute of Mining Engineers for
1893:--

"THE DEPOSITION OF GOLD.

"The question as to how gold was originally deposited in our auriferous
lodes is one to which a large amount of attention has been given, both
by mineralogists and practical miners, and which has been hotly argued
by those who held the igneous theory and those who pronounced for the
aqueous theory. It was held by the former that as gold was not probably
existent in nature in any but its metallic form, therefore it had been
deposited in its siliceous matrix while in a molten state, and many
ingenious arguments were adduced in support of this contention. Of late,
however, most scientific men, and indeed many purely empirical inquirers
(using the word empirical in its strict sense) have come to the
conclusion that though the mode in which they were composed was not
always identical, all lodes, including auriferous formations, were
primarily derived from mineral-impregnated waters which deposited their
contents in fissures caused either by the cooling of the earth's crust
or by volcanic agency.

"The subject is one which has long had a special attraction for the
writer, who has published several articles thereon, wherein it was
contended that not only was gold deposited in the lodes from aqueous
solution, but that some gold found in form of nuggets had not been
derived from lodes but was nascent in its alluvial bed; and for this
proof was afforded by the fact that certain nuggets have been unearthed
having the shape of an adjacent pebble or angular fragment of stone
indented in them. Moreover, no true nugget of any great size has ever
been found in a lode such as the Welcome, 2159 oz., or the Welcome
Stranger, 2280 oz.; while it was accidentally discovered some years ago
that gold could be induced to deposit itself from its mineral salt to
the metallic state on any suitable base, such as iron sulphide.

"Following out this fact, I have experimented with various salts of
gold, and have obtained some very remarkable results. I have found it
practicable to produce most natural looking specimens of auriferous
quartz from stone which previously, as proved by assay, contained no
gold whatever. Moreover, the gold, which penetrates the stone in a
thorough manner, assumes some of the more natural forms. It is always
more or less mammillary, but at times, owing to causes which I have not
yet quite satisfied myself upon, is decidedly dendroidal, as may be seen
in one of the specimens which I have submitted to members. Moreover,
I find it possible to moderate the colour and to produce a specimen in
which the gold shall be as ruddy yellow as in the ferro-oxide gangue of
Mount Morgan, or to tone it to the pale primrose hue of the product of
the Croydon mines.

"I note that the action of the bath in which the stone is treated has a
particularly disintegrating effect on many of the specimens. Some, which
before immersion were of a particularly flinty texture, became in a few
weeks so friable that they could be broken up by the fingers. So far
as my experiments have extended they have proved this, that it was not
essential that the silica and gold should have been deposited at the one
time in auriferous lodes. A non-auriferous siliceous solution may have
filled a fissure, and, after solidifying, some volcanic disturbance may
have forced water impregnated with a gold salt through the interstices
of the lode formation, when, if the conditions were favourable, the gold
would be deposited in metallic forms. I prefer, for reasons which will
probably be understood, not to say exactly by what process my results
are obtained, but submit specimens for examination.

"(1) Piece of previously non-gold bearing stone. Locality near Adelaide,
now showing gold freely in mammillary and dendroidal form.

"(2) Stone from New South Wales, showing gold artificially introduced in
interstices and on face.

"(3) Stone from West Australia, very glassy looking, now thoroughly
impregnated with gold; the mammillary formation being particularly
noticeable.

"(4) Somewhat laminated quartz from Victoria, containing a little
antimony sulphide. In this specimen the gold not only shows on the
surface but penetrates each of the laminations, as is proved by
breaking.

"(5) Consists of fragments of crystallised carbonate of lime from
Tarrawingee, in which the gold is deposited in spots, in appearance like
ferrous oxide, until submitted to the magnifying glass.

"The whole subject is worthy of much more time than I can possibly give
it. The importance lies in this: That having found how the much desired
metal may have been deposited in its matrix, the knowledge should help
to suggest how it may be economically extracted therefrom."

A very remarkable nugget weighing 16 3/4 oz. was sluiced from near the
surface in one of my own mining properties at Woodside, South Australia,
some years ago, which illustrated the nuclear theory very beautifully.
This nugget is very irregular in shape, fretted and chased as though
with a jeweller's graving tool, showing plainly the shape of the
pyritous crystals on which it was formed while the interstices were
filled with red hematite iron just as found in artificially formed
nuggets on a sulphide of iron base. The author has a nugget from the
same locality weighing about 1 1/2 oz. which exhibits in a marked degree
the same characteristics, as indeed does most of the alluvial gold
found in the Mount Lofty Ranges; also a nugget from near the centre
of Australia weighing four ounces, in which the original crystals of
pyrites are reproduced in gold just as an iron horse-shoe, placed in
a launder through which cupriferously impregnated water flows, will in
time be changed to nearly pure copper and yet retain its shape.

Now with regard to the four points I have put as to the apparent
anomalies of occurrence of alluvial gold. The reason why alluvial gold
is of finer quality as a rule than reef is probably because while gold
and silver, which have a considerable affinity for each other, were
presumably dissolved from their salts and held in solution in the same
mineral water, they would in many cases not be deposited together, for
the reason that silver is most readily deposited in the presence of
alkalies, which would be found in excess in mineral waters coming direct
from the basic rocks, while gold is induced to precipitate more quickly
in acid solutions, which would be the character of the waters after
they had been exposed to atmospheric action and to contact with organic
matters.

This, then, may explain not only the comparatively greater purity of the
alluvial gold, but also why big nuggets are found so far from auriferous
reefs, and also why heavy masses of gold have been frequently unearthed
from among the roots even of living trees, but more particularly in
drifts containing organic matter, such as ancient timber.

All, then, that has been adduced goes to establish the belief that the
birthplace of our gold is in certain of the earlier rocks comprising the
earth's crust, and that its appearance as the metal we value so highly
is the result of electro-chemical action, such as we can demonstrate in
the laboratory.



CHAPTER VI

GOLD EXTRACTION

We now come to a highly important part of our subject, the practical
treatment of ores and matrixes for the extraction of the metals
contained. The methods employed are multitudinous, but may be divided
into four classes, namely, washing, amalgamating with mercury,
chlorinating, cyaniding and other leaching processes, and smelting. The
first is used in alluvial gold and tin workings and in preparing some
silver, copper, and other ores for smelting, and consists merely in
separating the heavier metals and minerals from their gangues by their
greater specific gravity in water. The second includes the trituration
of the gangue and the extraction of its gold or silver by means of
mercury. Chlorinating and leaching generally is a process whereby
metals are first changed by chemical action into their mineral salts,
as chloride of gold, nitrate of silver, sulphate of copper, and being
dissolved in water are afterwards redeposited in the metallic form by
means of well-known re-agents.

In really successful mining it is in the last degree important that the
mode of extraction of metals in the most scientific manner should be
thoroughly understood, but as a general rule the science of metallurgy
is but very superficially grasped even by those whose special business
it is to treat ore bodies in order to extract their metalliferous
contents, and whether in quartz crushing mill, lixiviating, or smelting
works there is much left to be desired in the method of treating our
ores.

My attention was recently attracted to an article written by Mr. F. A.
H. Rauft, M.E., from which I make the following extract:

He says, speaking of the German treatment of ores and the mode of
procedure in Australia, "It is high time that Government stepped in and
endeavoured by prompt and decisive action to bring the mining industry
upon a sound and legitimate basis. Though our ranges abound in all
kinds of minerals that might give employment to hundreds of thousands of
people, mining is carried on in a desultory, haphazard fashion. There is
no system, and the treatment of ores is of necessity handed over to the
tender mercies of men who have not even an idea of what an intricate
science metallurgy has become in older countries. During many years of
practical experience I have never known a single instance where a lode,
on being worked, gave a return according to assay, and I have never
known any mine where some of the precious metals could not be found in
the tailings or slag. The Germans employ hundreds of men in working for
zinc which produces some two or three per cent to the ton; here the same
percentage of tin could hardly be made payable, and this, mark you,
is owing not to cheaper labour alone, but chiefly to the labour-saving
appliances and the results of the researches of such gigantic intellects
as Professor Kerl and many others, of whom we in this country never even
hear. Go into any of the great mining works of central Germany, and you
may see acres covered by machinery ingeniously constructed to clean,
break, and sort, and ultimately deliver the ores into trucks or direct
into the furnace, and the whole under the supervision of a youngster or
two. When a parcel of ore arrives at any of the works, say Freiberg or
Clausthal, it is carefully assayed by three or four different persons
and then handed over to practical experts, who are expected to produce
the full amount of previous metal according to assay; and if by any
chance they do not, a fixed percentage of the loss is deducted from
their salary; or, if the result is in excess of this assay which is more
frequently the case, a small bonus is added to their pay. Compare
this system with our own wasteful, reckless method of dealing with our
precious metals, and we may hide our heads in very shame."

All really practical men will, I think, endorse Mr. Rauft's opinion.
Well organised and conducted schools of mines will gradually ameliorate
this unsatisfactory state of things, and I hope before long that we
shall have none but qualified certificated men in our mines. In the
meantime a few practical hints, particularly on that very difficult
branch of the subject, the saving of gold, will, it is hoped, be found
of service.

The extraction of gold from the soil is an industry so old that its
first introduction is lost in the mist of ages. As before stated, gold
is one of the most widely disseminated of the metals, and man, so soon
as he had risen from the lowest forms of savagery, began to be attracted
by the kingly metal, which he found to be easily fashioned into articles
of ornament and use, and to be practically non-corrodable.

What we now term the dish or pan, then, doubtless generally a wooden
bowl, was the appliance first used; but they had also an arrangement,
somewhat like our modern blanket tables, over which the auriferous
sand was passed by means of a stream of water. The sands of some of
the rivers from which portions of the gold supply of the old world was
derived are still washed over year after year in exactly the same manner
as was employed, probably, thousands of years ago, the labour, very
arduous, being often carried on by women, who, standing knee deep in
water, pan off the sand in wooden bowls much as the digger in modern
alluvial fields does with his tin dish. The resulting gold often
consists of but a grain or two of fine dust-gold, which is carefully
collected in quills, and so exported or traded for goods.

The digger of to-day having discovered payable alluvial dirt at such a
depth as to permit of its being profitably worked by small parties of
men with limited or no capital, procures first a half hogshead for a
puddling tub, a "cradle," or "long tom," and tin dish. The "wash dirt,"
as the auriferous drift is usually termed, contains a considerable
admixture of clay of a more or less tenacious character, and the bulk of
this has to be puddled and so disintegrated before the actual separation
of the gold is attempted in the cradle or dish. This is done in the
tub by constantly stirring with a shovel, and changing the water as it
becomes charged with the floating argillaceous, or clayey, particles.
The gravel is then placed in the hopper of the cradle which separates
the larger stones and pebbles, the remainder passing down over inclined
ledges as the cradle is slowly rocked and supplied with water. At
the bottom of each ledge is a riffle to arrest the particles of gold.
Sometimes, when the gold is very fine, amalgamated copper plates are
introduced and the lower ledges are covered with green baize to act as
blanket tables and catch gold which might otherwise be lost.

A long tom is a trough some 12 feet in length by 20 inches in width at
the upper end, widening to 30 inches at the lower end; it is about 9
inches deep and has a fall of 1 inch to a foot. An iron screen is placed
at the lower end where large stones are caught, and below this screen
is the riffle box, 12 feet long, 3 feet wide, and having the same
inclination as the upper trough. It is fitted with several riffles in
which mercury is sometimes placed.

Much more work can be done with this appliance than with the cradle,
which it superseded. Of course, the gold must be coarse and water
plentiful.

When, however, the claim is paying, and the diggings show signs of some
permanency, a puddling machine is constructed. This is described in the
chapter called "Rules of Thumb."

Hydraulicing and ground sluicing is a very cheap and effective method
of treating large quantities of auriferous drift, and, given favourable
circumstances, such as a plentiful supply of water with good fall and
extensive loose auriferous deposits, a very few grains to the ton or
load can be made to give payable returns. The water is conveyed in
flumes, or pipes to a point near where it is required, thence in wrought
iron pipes gradually reduced in size and ending in a great nozzle
somewhat like that of a fireman's hose. The "Monitor," as it is
sometimes called, is generally fixed on a movable stand, so arranged
that the strong jet of water can be directed to any point by a simple
adjustment. A "face" is formed in the drift, and the water played
against the lower portion of the ledge, which is quickly undermined, and
falls only to be washed away in the stream of water, which is conducted
through sluices with riffles, and sometimes over considerable lengths
of amalgamated copper plates. This class of mining has been most
extensively carried out in California and New Zealand, and some
districts of Victoria, but the truly enormous drifts of the Shoalhaven
district in New South Wales must in the near future add largely to the
world's gold supply. These drifts which are auriferous from grass roots
to bed rock extend for nearly fifty miles, and are in places over 200
feet deep. Want of capital and want of knowledge has hitherto prevented
their being profitably worked on a large scale.

The extraction of reef gold from its matrix is a much more complicated
process, and the problem how most effectively to obtain that great
desideratum--a complete separating and saving operation--is one which
taxes the skill and evokes the ingenuity of scientific men all over the
world. The difficulty is that as scarcely any two gangues, or matrixes,
are exactly alike, the treatment which is found most effective on
one mine will often not answer in another. Much also depends on the
proportion of gold to the ton of rock under treatment, as the most
scientific and perfect processes of lixiviation hitherto adopted will
not pay, even when all other conditions are favourable, if the amount of
gold is much under half an ounce to the ton and even then will leave
but a very small profit. If, however, the gold is "free," and the lode
large, a very few pennyweights (or "dollars," as the Americans say) to
the ton will pay handsomely. The mode of extraction longest in vogue,
and after all the cheapest and most effective, for free milling ores
where the gold is not too fine, is amalgamation with mercury, which
metal has a strong affinity for gold, silver, and copper.

As to crushing appliances, I shall not say much. "Their name is legion
for they are many," and the same may be said of concentrators. It may
be old-fashioned, but I admit my predilection is still in favour of
the stamper-battery, for the reason that though it may be slower in
proportion to the power employed, it is simple and not liable to get out
of order, a great advantage when one has so often to depend on men who
bring to their work a supply principally of main strength and stupidity.
For the same reason I prefer the old draw and lift, and plunger pumps to
newer but more complicated water-lifters.

On both these points, however, I am constrained to admit that my opinion
has recently been somewhat shaken.

I have lately seen two appliances which appear to mark a new era in the
scientific progress of mining. One is the "Griffin Mill," the other the
"Lemichel Siphon Elevateur."

The first is in some respects on the principle of the Huntingdon Mill.
The latter, if the inventor may be believed and the results seem to
show he can be, will be a wonderful factor in developing not only mining
properties where a preponderance of water is the trouble, but also
in providing an automatic, and therefore extremely cheap, mode of
water-raising and supply, which in simplicity is thus far unexampled.
Atmospheric pressure alone is relied on. The well-known process of the
syphon is the basis, but with this essential difference, that a
large proportion of the water drawn up to the apex of the syphon is
super-elevated to heights regulated by the fall obtained in the outlet
leg. This elevation can be repeated almost indefinitely by returning the
waste water to the reservoirs.

The Lemichel Syphon is a wonderful, yet most simple application of
natural force. The inlet leg of the syphon is larger in diameter than
the outlet leg, and is provided at the bottom with a valve or "clack."
The outlet leg has a tap at its base. At the apex are two chambers, with
an intermediary valve, regulated by a counterpoise weighted lever. The
first chamber has also a vertical valve and pipe.

When the tap of the outlet leg is turned, the water flows as in an
ordinary syphon, but owing to the rapid automatic opening and shutting
of the valve in the first chamber about 45 per cent of the water is
diverted, and may be raised to a height of many feet above the top of
the syphon.

It need not be impressed on practical men that if this invention will
perform anything like what is claimed for it, its value can hardly be
calculated. After a careful inspection of the appliance in operation, I
believe it will do all that is stated.

Another invention is combined with this which, by a very small
expenditure of fuel, will enable the first point of atmospheric
pressure to be attained. In this way the unwatering of mines may be very
inexpensively effected, or water for irrigation purposes may be raised
from an almost level stream.

The Griffin Mill is a centrifugal motion crusher with one roller only,
which, by an ingenious application of motive force, revolves in an
opposite direction to its initial momentum, and which evolves a force of
6000 lb. against the tire, which is only 30 inches in diameter. For hard
quartz the size should be increased by at least 6 inches. It is claimed
for this mill that it will pulverise to a gauge of 900 holes to the
square inch from 1 1/2 to 2 1/2 tons per hour, or, say roughly, 150 tons
per week.

The Huntingdon mill is a good crusher and amalgamator where the material
to be operated on is comparatively soft, but does not do such good work
when the stone is of a hard flinty nature.

A No. 4 Dodge stone-breaker working about 8 hours will keep a five-foot
Huntingdon mill going 24 hours, and an automatic feeder is essential.
For that matter both are almost essential for an ordinary stamper
battery, and will certainly increase the crushing capacity and do better
work from the greater regularity of the feed.

A 10 h.-p. (nominal) engine of good type is sufficient for Huntingdon
mill, rock breaker, self-feeder and steam pump. A five-foot mill under
favourable circumstances will crush about as much as eight head of
medium weight stamps.

The Grusonwek Ball Mills, made by Krupp of Germany, also that made by
the Austral Otis Company, Melbourne, are fast and excellent crushing
triturating appliances for either wet or dry working, but are specially
suited only for ores when the gold is fine and evenly distributed in
the stone. The trituration is effected by revolving the stone in a large
cylinder together with a number of steel balls of various sizes, the
attrition of which with the rock quickly grinds it to powder of any
required degree of fineness.

More mines have been ruined by bad mill management probably than by bad
mining, though every experienced man must have seen in his time many
most flagrant instances of bungling in the latter respect. Shafts are
often sunk on the wrong side of the lode or too near or too far away
therefrom, while instances have not been wanting where the (mis) manager
has, after sinking his shaft, driven in the opposite direction to that
where the lode should be found.

A common error is that of erecting machinery before there is sufficient
ore in sight to make it certain that enough can be provided to keep the
plant going. In mines at a distance from the centre of direction it is
almost impossible to check mistakes of this description, caused by the
ignorance or over sanguineness of the mine superintendent, and they are
often as disastrous as they are indefensible. Another fertile source of
failure is the craze for experimenting with untried inventions, alleged
to be improvements on well-known methods.

A rule in the most scientific of card games, whist, is "when in doubt
lead trumps." It might be paraphrased for mining thus: "When in doubt
about machinery use that which has been proved." Let some one else do
the experimenting.

The success of a quartz mine depends as much on favourable working
conditions as on its richness in gold. Thus it may be that a mine
carrying 5 or 6 oz. of gold to the ton but badly circumstanced as to
distance, mountainous roads, lack of wood and water, in some cases a
plethora of the latter, or irregularly faulted country, may be less
profitable than another showing only 5 or 6 dwt., but favourably
situated.

It is usually desirable to choose for the battery site, when possible,
the slope of a hill which consists of rock that will give a good
foundation for your battery.

The economical working depends greatly on the situation, which is
generally fixed more or less, in the proximity of the water. The
advantages of having ample water for battery purposes, or of using
water as a motive power, are so great that it is very often desirable
to construct a tramway of considerable length, when, by so doing, that
power can be utilised; hence most quartz mills are placed near streams,
or in valleys where catchment dams can be effectively constructed,
except, of course, in districts where much water has to be pumped from
the mine.

If water-power can be used, the water-motor will necessarily be placed
as low as possible, in order to obtain the fullest available power. One
point is essential. Special care must be taken to keep the appliances
above the flood-level. If the water in the stream is not sufficient to
carry off the tailings, the battery should be placed at such a height
as to leave sufficient slope for tailings' dumps. This is more important
when treating ore of such value that the tailings are worth saving for
secondary treatment. In this case provision should be made for tailings,
dams, or slime pits.

Whether the battery is worked by water, steam, or gas power, an ample
supply of water is absolutely necessary, at least until some thoroughly
effective mode of dry treatment is established. If it can be possibly
arranged the water should be brought in by gravitation, and first cost
is often least cost; but where this is impossible, pumps of sufficient
capacity, not only to provide the absolute quantity used, but to meet
any emergency, should be erected.

The purer the water the better it will be for amalgamating purposes, and
in cold climates it is desirable to make provision for heating the water
supplied to the battery. This can be done by means of steam from the
boiler led through the feed tanks; but where the boiler power is not
more than required, waste steam from the engine may be employed, but
care must be taken that no greasy matter comes in contact with the
plates. The exhaust steam from the engine may be utilised by carrying it
through tubes fitted in an ordinary 400 gallon tank.

Reducing appliances have often to be placed in districts where the water
supply is insufficient for the battery. When this is so every available
means must be adopted for saving the precious liquid, such as condensing
the exhaust steam from the engine. This may be done by conducting it
through a considerable length of ordinary zinc piping, such as is used
for carrying the water from house roofs. Also tailings pits should be
made, in which the tailings and slimes are allowed to settle, and the
cleared water is pumped back to be again used. These pits should, where
practicable, be cemented. It is usual, also, to have one or two tailings
dams at different levels; the tailings are run into the upper dam, and
are allowed to settle; the slimes overflow from it into the lower dam,
and are there deposited, while the cleared water is pumped back to the
battery. Arrangements are made by which all these reservoirs can be
sluiced out when they are filled with accumulated tailings. It is well
not to leave the sluicing for too long a period, as when the slimes and
tailings are set hard they are difficult to remove.

Where a permanent reducing plant is to be erected, whatever form of
mill may be adopted, it is better for many reasons to use automatic
ore feeders. Of these the best two I have met are the "Tulloch" and
"Challenge" either of which can be adapted to any mill and both do good
work.

By their use the reducing capacity of the mill is increased, and the
feeding being regular the wear and tear is decreased, while by the
regulated feeding of the "pulp" in the battery box or mortar can be
maintained at any degree of consistency which may be found desirable,
and thus the process of amalgamation will be greatly facilitated. The
only objection which can be urged against the automatic feeder is that
the steel points of picks, gads, drills, and other tools may be allowed
to pass into the mortar or mill, and thus cause considerable wear
and tear. This, I think, can be avoided by the adoption of the magnet
device, described in "Rules of Thumb."

There are many mines where 3 to 4 dwt. of gold cover all the cost, the
excess being clear profit. In fact there are mines which with a yield
of 1 1/2 to 2 dwt. a ton, and crushing with water power, have actually
yielded large profits. On the other hand, mines which have given
extraordinary trial crushings have not paid working expenses. Everything
depends on favourable local conditions and proper management.

Having decided what class of crushing machinery you will adopt, the
first point is to fix on the best possible site for its erection. This
requires much judgment, as success or failure may largely depend on
the position of your machinery. One good rule is to get your crusher as
reasonably high as possible, as it is cheaper to pump your feed water
a few feet higher so as to get a good clear run for your tailings, and
also to give you room to erect secondary treatment appliances, such
as concentrators and amalgamators below your copper plates and blanket
strakes.

Next, and this is most important, see that your foundations are solid
and strong. A very large number of the failures of quartz milling plants
is due to neglect of this rule.

I once knew a genius who erected a 10-Lead mill in a new district, and
who adopted the novel idea of placing a "bed log" laterally beneath
his stampers. The log was laid in a little cement bed which, when the
battery started, was not quite dry. The effect was comical to every one
but the unfortunate owners. It was certainly the liveliest, but at the
same time one of the most ineffective batteries I have seen.

In a stamp mill the foundations are usually made of hard wood logs about
5 to 6 feet long, set on end, the bottom end resting on rock and set
round with cement concrete. These are bolted together, and the "box" or
mortar is bolted to them. The horizontal logs to carry the "horses" or
supports for the battery frame should also be of good size, and solidly
and securely bolted. The same applies to your engine-bed, but whether it
be of timber, or mason work, above all things provide that the whole of
your work is set out square and true to save after-wear and friction.

Considerable difference of opinion exists as to the most effective
weight for stamps. My experience has been that this largely depends on
the nature of your rock, as does also the height for the drop. I have
usually found that with medium stamps, say 7 to 7 1/2 cwt. with fair
drop and lively action, about 80 falls per minute, the best results were
obtained, but the tendency of modern mill men is towards the heavier
stamps, 9 cwt. and even heavier.

To find the horse-power required to drive a battery, multiply the weight
of one stamp by the number of stamps in the battery; the height of lift
in feet by the number of lifts per minute; add one-third of the product
for friction, and the result will be the number of feet-lbs. per minute;
divide this by 33,000 which is the number of feet-lbs. per minute equal
to 1 h.-p. and the result will be the h.-p. required. Thus if a stamp
weighs 800 lb. and you have five in the box, and each stamp has a lift
of 9 in. = 0.75 ft. and strikes 80 blows per minute, then 800 x 5 x 0.75
x 80 = 240,000; one-third of 240,000 = 80,000 which added to 240,000
= 320,000; and 320,000 divided by 33,000 = 9.7 h.-p. or 1.9 h.-p. each
stamp.

The total weight of a battery, including stamper box, stampers, etc.,
may be roughly estimated at about 1 ton per stamp. Medium weight
stampers, including shank cam, disc, head, and shoe, weigh from 600 to
700 lb., and need about 3/4 h.-p. to work them.

The quantity of water required for the effective treatment of
gold-bearing rock in a stamper battery varies according to the
composition of the material to be operated upon, but generally it is
more than the inexperienced believe. For instance, "mullocky" lode
stuff, containing much clayey matter or material carrying a large
percentage of heavy metal, such as titanic iron or metallic sulphides,
will need a larger quantity of water per stamp than clean quartz. A fair
average quantity would be 750 to 1000 gallons per hour for each box of
five stamps. In general practice I have seldom found 1000 gallons per
hour more than sufficient.

As to the most effective mesh for the screen or grating no definite
rule can be given, as that depends so largely on the size of the gold
particles contained in the gangue. The finer the particles the closer
must be the mesh, and nothing but careful experiment will enable the
battery manager to decide this most important point. The American
slotted screens are best; they wear better than the punched gratings and
can be used of finer gauge. Woven steel wire gauze is employed with good
effect in some mills where especially fine trituration is required. This
class of screen requires special care as it is somewhat fragile, but
with intelligent treatment does good work.

The fall or inclination of the tables, both copper and blanket strakes,
is also regulated by the class of ore. If it should be heavy then the
fall must be steeper. A fair average drop is 3/4 inch to the foot. Be
careful that your copper tables are thoroughly water-tight, for remember
you are dealing with a very volatile metal, quicksilver; and where water
will percolate mercury will penetrate.

The blanket tables are simply a continuation of the mercury tables, but
covered with strips of coarse blanket, green baize, or other flocculent
material, intended to arrest the heavier metallic particles which, owing
to their refractory nature, have not been amalgamated.

The blanket table is, however, a very unsatisfactory concentrator
at best, and is giving place to mechanical concentrators of various
descriptions.

An ancient Egyptian gold washing table was used by the Egyptians in
treating the gold ores of Lower Egypt. The ore was first ground, it is
likely by means of some description of stone arrasts and then passed
over the sloping table with water, the gold being retained in the
riffles. In these the material would probably be mechanically agitated.
Although for its era ingenious it will be plain to practical men that if
the gold were fine the process would be very ineffective. Possibly, but
of this I have no evidence, mercury was used to retain the gold on the
riffles, as previously stated. This method of saving the precious metal
was known to the ancients.

At a mine of which I was managing director the lode was almost entirely
composed of sulphide of iron, carbonate of lime or calcspar, with a
little silica. In this case it has been found best to crush without
mercury, then run the pulp into pans, where it is concentrated. The
concentrates are calcined in a common reverberatory furnace, and
afterwards amalgamated with mercury in a special pan, the results as to
the proportion of gold extracted being very satisfactory; but it does
not therefore follow that this process would be the most suitable in
another mine where the lode stuff, though in some respects similar, yet
had points of difference.

I was lately consulted with respect to the treatment of a pyritic ore
in a very promising mine, but could not recommend the above treatment,
because though the pyrites in the gangue was similar, the bulk of the
lode consisted of silica, consequently there would be a great waste of
power in triturating the whole of the stuff to what, with regard to much
of it, would be an unnecessary degree of fineness. I am of opinion
that in cases such as this, where it is not intended to adopt the
chlorination or cyanogen process, it will be found most economical to
crush to a coarse gauge, concentrate, calcine the concentrates, and
finally amalgamate in some suitable amalgamator.

Probably for this mode of treatment Krom rolls would be found more
effective reducing agents than stampers, as with them the bulk of the
ore can be broken to any required gauge and there would consequently be
less loss in "slimes."

The great art in effective battery work is to crush your stuff to
the required fineness only, and then to provide that each particle is
brought into contact with the mercury either in box, trough, plate, or
pan. To do this the flow of water must be carefully regulated; neither
so much must be used as to carry the stuff off too quickly nor so little
as to cause the troughs and plates to choke. In cold weather the water
may be warmed by passing the feed-pipe through a tank into which the
steam from the engine exhausts, and this will be found to keep the
mercury bright and lively. But be careful no engine oil or grease
mingles with the water, as grease on the copper tables will absolutely
prevent amalgamation.

The first point, then, is to crush the gangue effectively, the degree of
fineness being regulated by the fineness of the gold itself. This being
done, then comes the question of saving the gold. If the quartz be
clean, and the gold unmixed with base metal, the difficulty is small.
All that is required is to ensure that each particle of the Royal metal
shall be brought into contact with the mercury. The main object is to
arrest the gold at the earliest possible stage; therefore, if you are
treating clean stone containing free gold, either coarse or fine,
I advise the use of mercury in the boxes, for the reason that a
considerable proportion of the gold will be caught thereby, and settling
to the bottom, or adhering to amalgamated plates in the boxes, where
such are used, will not be afterwards affected by the crushing action,
which might otherwise break up, or "flour," the mercury. On the whole, I
rather favour the use of mercury in the box at any time, unless the ore
is very refractory--that is, contains too great a proportion of base
metals, particularly sulphides of iron, arsenic, etc., when the result
will not be satisfactory, but may entail great loss by the escape of
floured mercury carrying with it particles of gold. Here only educated
intelligence, with experience, will assist the battery manager to adopt
the right system.

The crushed stuff--generally termed the "pulp"--passes from the boxes
through the "screens" or "gratings," and so on to the "tables"--i.e.,
sheets of copper amalgamated on the upper surface with mercury, and
sometimes electroplated with silver and afterwards treated with mercury.
Unless the quartz is very clean, and, consequently light, I am opposed
to the form of stamper box with mercury troughs cast in the "lip," nor
do I think that a trough under the lip is a good arrangement, as it
usually gets so choked and covered with the heavy clinging base metals
as to make it almost impossible for the gold to come in contact with the
mercury. It will be found better where the gold is fine, or the gangue
contains much base metal, to run the pulp from the lip of the battery
into a "distributor."

The distributor is a wooden box the full width of the "mortar," having
a perforated iron bottom set some three to four inches above the first
copper plate, which should come up under the lip. The effect of this
arrangement is that the pulp is dashed on the plate by the falling
water, and the gold at once coming in contact with the mercury begins
to accumulate and attract that which follows, till the amalgam becomes
piled in little crater-shaped mounds, and thus 75 per cent of the gold
is saved on the top plate.

I have tried a further adaptation of this process when treating ores
containing a large percentage of iron oxide, where the bulk of the gold
is impalpably fine, and contained in the "gossan." At the end of the
blanket table, or at any point where the crushed stuff last passes
before going to the "tailings heap," or "sludge pit," a "saver" is
placed. The saver is a strong box about 15 in. square by 3 ft. high,
one side of which is removable, but must fit tight. Nine slots are cut
inside at 4 in. apart, and into these are fitted nine square perforated
copper plates, having about eighty to a hundred 1/4 in. holes in each;
the perforations should not come opposite each other. These plates are
to be amalgamated on both sides with mercury, in which a very little
sodium has been placed (if acid ores are being treated, zinc should be
employed in place of sodium, and to prevent the plates becoming bare, if
the stuff is very poor, thick zinc amalgam may be used with good effect;
but in that case discontinue the sodium, and occasionally, if required,
say once or twice in the day, mix an ounce of sulphuric acid in a
quart of water and slowly pour it into the launder above the saver).
Underneath the "saver" you require a few riffles, or troughs, to catch
any waste mercury, but if not overfed there should be no waste. This
simple appliance, which is automatic and requires little attention, will
sometimes arrest a considerable quantity of gold.

We now come to the subsidiary processes of battery work, the "cleaning"
of plates, and "scaling" same when it is desired to get all the gold
off them, the cleaning and retorting of amalgam, and of the mercury,
smelting gold, etc.

Plates should be tenderly treated, kept as smooth as possible, and when
cleaning up after crushing, in your own battery, the amalgam--except,
say, at half-yearly intervals--should be removed with a rubber only; the
rubber is simply a square of black indiarubber or soft pine wood.

When crushing rich ore, and you want to get nearly all the gold off your
plates, the scraper may be resorted to. This is usually made by the mine
blacksmith from an old flat file which is cut in half, the top turned
over, beaten out to a sharp blade, and kept sharp by touching it up on
the grinding-stone. This, if carefully used, will remove the bulk of the
amalgam without injury to the plate.

Various methods of "scaling" plates will be found among "Rules of
Thumb."

Where base metals are present in the lode stuff frequent retortings of
the mercury, say not less than once a month, will be found to have a
good effect in keeping it pure and active. For this purpose, and
in order to prevent stoppage of the machinery, a double quantity is
necessary, so that half may be used alternately. Less care is required
in retorting the mercury than in treating the amalgam, as the object
in the one case is more to cleanse the metal of impurities than to save
gold, which will for the most part have been extracted by squeezing
through the chamois leather or calico. A good strong heat may therefore
at once be applied to the retort and continued, the effect being to
oxidise the arsenic, antimony, lead, etc., which, in the form of oxides,
will not again amalgamate with the mercury, but will either lie on
its surface under the water, into which the nozzle of the retort is
inserted, or will float away on the surface of the water. I have also
found that covering the top of the mercury with a few inches of broken
charcoal when retorting has an excellent purifying effect.

In retorting amalgam, much care and attention is required.

First, never fill the retort too full, give plenty of room for
expansion; for, when the heat is applied, the amalgam will rise like
dough in an oven, and may be forced into the discharge pipe, the
consequence being a loss of amalgam or the possible bursting of the
retort. Next, be careful in applying the heat, which should be done
gradually, commencing at the top. This is essential to prevent waste and
to turn out a good-looking cake of gold, which all battery managers like
to do, even if they purpose smelting into bars.

Sometimes special difficulties crop up in the process of separating the
gold from the amalgam. At the first "cleaning up" on the Frasers Mine at
Southern Cross, West Australia, great consternation was excited by the
appearance of the retorted gold, which, as an old miner graphically
put it, was "as black as the hind leg of a crow," and utterly unfit for
smelting, owing to the presence of base metals. Some time after this I
was largely interested in the Blackborne mine in the same district when
a similar trouble arose. This I succeeded in surmounting, but a still
more serious one was too much for me--i.e., the absence of payable
gold in the stone. I give here an extract from the _Australian Mining
Standard_, of December 9th, 1893, with reference to the mode of cleaning
the amalgam which I adopted.

NEW METHOD OF SEPARATING GOLD FROM IMPURE AMALGAM.

I had submitted to me lately a sample of amalgam from a mine in West
Australia which amalgam had proved a complete puzzle to the manager
and amalgamator. The Mint returns showed a very large proportion
of impurity, even in the smelted gold. When retorted only, the Mint
authorities refused to take it after they had treated two cakes, one of
119 oz., which yielded only 35 oz. 5 dwt. standard gold, and one of 140
oz., which gave 41 oz. 10 dwt. The gold smelted on the mine was nearly
as bad proportionately. Thus, 128 oz. smelted down at the Mint to 87 oz.
8 dwt. and 109 oz. to 55 oz. 10 dwt. The impurity was principally
iron, a most unusual thing in my experience, and was due to two causes
revealed by assay of the ore and analysis of the mine water, viz.,
an excess of arsenate of iron in the stone, and the presence in large
proportions of mineral salts, principally chloride of Calcium CaCl.,
sodium NaCl, and magnesium MgCl2, in the mine water used in the battery.
The exact analysis of the water was as follows:--

     Carbonate of Iron         FeCO3        2.76 grains per gallon
     Carbonate of Calcium      CaCO3        7.61 grains per gallon
     Sulphate of Calcium       CaSO4       81.71 grains per gallon
     Chloride of Calcium       CaCl2     2797.84 grains per gallon
     Chloride of Magnesium     MgCl2      610.13 grains per gallon
     Chloride of Sodium or
     Common Salt            NaCl      5072.65 grains per gallon

     Total solid matter         8572.70 = 19.5 oz. to the gallon.

It will be seen, then, that this water is nearly four times more salt
that that of the sea. The effect of using a water of this character, as
I have previously found, is to cause the amalgamation of considerable
quantities of iron with the gold as in this case.

I received 10 oz. of amalgam, and having found what constituted its
impurities proceeded to experiment as to its treatment. When retorted on
the mine it was turned out in a black cake so impure as almost to
make it impossible to smelt properly. I found the same result on
first retorting, and after a number of experiments which need not be
recapitulated though some were fairly effective, I hit on the following
method, which was found to be most successful and will probably be
so found in other localities where similarly unfavourable conditions
prevail.

I took a small ball of amalgam, placed it in a double fold of new fine
grained calico, and after soaking in hot water put it under a powerful
press. The weight of the ball before pressing was 1583 gr. From this
383 gr. of mercury was expressed and five-eighths of a grain of gold
was retorted from this expressed mercury. The residue, in the form of a
dark, grey, and very friable cake, was powdered up between the fingers
and retorted, when it became a brown powder; it was afterwards calcined
on a flat sheet in the open air; result, 510 gr. of russet-coloured
powder. Smelted with borax, the iron oxide readily separated with the
slag; result, 311 gr. gold 871-1000 fine; a second smelting brought this
up to 914-1000 fine. Proportion of smelted gold to amalgam, one-fifth.

The principal point about this mode of treatment is the squeezing out
of the mercury, whereby the amalgam goes into the retort in the form of
powder, thus preventing the slagging of the iron and enclosure of
the gold. The second point of importance is thorough calcining before
smelting.

Of course it would be practicable, if desired, to treat the powder with
hydrochloric acid, and thus remove all the iron, but in a large way this
would be too expensive, and my laboratory treatment, though necessarily
on a small scale, was intended to be on a practical basis.

The amalgam at this mine was in this way afterwards treated with great
success.

For the information of readers who do not understand the chemical
symbols it may be said that

     FeCO3 is carbonate of iron;
     CaCO3 is carbonate of calcium;
     CaSO4 is sulphate of calcium;
     CaCl2 is chloride of calcium;
     MgCl2 is chloride of magnesium;
     NaCl is chloride of sodium, or common salt.




CHAPTER VII

GOLD EXTRACTION--SECONDARY PROCESSES AND LIXIVIATION

Before any plan is adopted for treating the ore in a new mine the
management should very seriously and carefully consider the whole
circumstances of the case, taking into account the quantity and quality
of the lode stuff to be operated on, and ascertain by analysis what are
its component parts, for, as before stated, the treatment which will
yield most satisfactory results with a certain class of gangue on one
mine will sometimes, even when the material is apparently similar, prove
a disastrous failure in another. Some time since I was glad to note that
the manager of a prominent mine strongly discountenanced the purchase of
any extracting plant until he was fully satisfied as to the character
of the bulk of the ore he would have to treat. It would be well for the
pockets of shareholders and the reputation of managers, if more of our
mine superintendents followed this prudent and sensible course.

Having treated on gold extraction with mercury by amalgamated plates
and their accessories, something must be said about secondary modes
of saving in connection with the amalgamation process. The operations
described hitherto have been the disintegration of the gold-bearing
material and the extraction therefrom of the coarser free gold. But it
must be understood that most auriferous lode stuff contains a proportion
of sulphides of various metals, wherein a part of the gold, usually in a
very finely divided state, is enclosed, and on this gold the mercury has
no influence. Also many lodes contain hard heavy ferric ores, such as
titanic iron, tungstate of iron, and hematite, in which gold is held.
In others, again, are found considerable quantities of soft powdery iron
oxide or "gossan," and compounds such as limonite, aluminous clay, etc.,
which, under the action of the crushing mill become finely divided and
float off in water as "slimes," carrying with them atoms of gold, often
microscopically small. To save the gold in such matrixes as these is an
operation which even the best of our mechanical appliances have not yet
fully accomplished.

Where there is not too great a proportion of base metals on which the
solvent will act, and when the material is rich enough in gold to pay
for the extra cost of treatment, chlorination or cyanisation are the
best modes of extraction yet practically adopted.

Presuming, however, that we are working by the amalgamation process, and
have crushed our stone and obtained the free gold, the next requirement
is an effective concentrator. Of these there are many before the
public, and some do excellent work, but do not act equally well in
all circumstances. The first and most primitive is the blanket table,
previously mentioned; but it can hardly be said to be very effective,
and requires constant attention and frequent changing and washing of the
strips of blanket.

Instead of blanket tables percussion tables are sometimes used, to which
a jerking motion is given against the flow of the water and pulp, and by
this means the heavier minerals are gathered towards the upper part of
the table, and are from thence removed from time to time as they become
concentrated.

I have seen this appliance doing fairly good work, but it is by no means
a perfect concentrator.

Another form of "shaking table" is one in which the motion is given
sideways, and this, whether amalgamated, or provided with small riffles,
or covered with blanket, keeps the pulp lively and encourages the
retention of the heavier particles, whether of gold or base metals
containing gold. There has also been devised a rocking table the action
of which is analogous to that of the ordinary miner's cradle. This
appliance, working somewhat slowly, swings on rockers from side to side,
and is usually employed in mills where, owing to the complexity of the
ore, difficulties have been met with in amalgamating the gold. Riffles
are provided and even very fine gold is sometimes effectively recovered
by their aid.

The Frue vanner will, as a rule, act well when the pulp is sufficiently
fine. It is really a adaptation of an old and simple apparatus used
in China and India for washing gold dust from the sands of rivers. The
original consisted of an endless band of strong cloth or closely woven
matting, run on two horizontal rollers placed about seven feet apart,
one being some inches lower than the other. The upper is caused to
revolve by means of a handle. The cloth is thus dragged upwards against
a small stream of water and sand fed to it by a second man, the first
man not only turning the handle but giving a lateral motion to the band
by means of a rope tied to one side.

Chinamen were working these forerunners of the Frue vanner forty years
ago in Australia, and getting fair returns.

The Frue vanner is an endless indiarubber band drawn over an inclined
table, to which a revolving and side motion is given by ingenious
automatic mechanism, the pulp being automatically fed from the upper
end, and the concentrates collected in a trough containing water in
which the band is immersed in its passage under the table; the lighter
particles wash over the lower end. The only faults with the vanner
are--first, it is rather slow; and secondly, though so ingenious it is
just a little complicated in construction for the average non-scientific
operative.

Of pan concentrators there is an enormous selection, the principle in
most being similar--i.e., a revolving muller, which triturates the sand,
so freeing the tiny golden particles and admitting of their contact with
the mercury. The mistake with respect to most of these machines is the
attempt to grind and amalgamate in one operation. Even when the stone
under treatment contains no deleterious compounds the simple action
of grinding the hard siliceous particles has a bad effect on the
quicksilver, causing it to separate into small globules, which either
oxidising or becoming coated with the impurities contained in the ore
will not reunite, but wash away in the slimes and take with them a
percentage of the gold. As a grinder and concentrator, and in some cases
as an amalgamator, when used exclusively for either purpose, the Watson
and Denny pan is effective; but although successfully used at one mine
I know, the mode there adopted would, for reasons previously given, be
very wasteful in many other mines.

There is considerable misconception, even among men with some practical
knowledge, as to the proper function of these secondary saving
appliances; and sometimes good machines are condemned because they will
not perform work for which they were never intended. It cannot be too
clearly realized that the correct order of procedure for extracting the
gold held in combination with base metals is--first, reduction of the
particles to a uniform gauge and careful concentration only; next,
the dissipation, usually by simple calcination, of substances in the
concentrates inimical to the thorough absorption of the gold by the
mercury; and lastly, the amalgamation of the gold and mercury.

For general purposes, where the gangue has not been crushed too fine,
I think the Duncan pan will usually be found effective in saving the
concentrates. In theory it is an enlargement of the alluvial miner's tin
dish, and the motion imparted to it is similar to the eccentric motion
of that simple separator.

The calcining may be effectively carried out in an ordinary
reverberatory furnace, the only skill required being to prevent over
roasting and so slagging the concentrates; or not sufficiently calcining
so as to remove all deleterious constituents; the subject, however, is
fully treated in Chapter VIII.

For amalgamating I prefer some form of settler to any further grinding
appliance, but I note also improvements in the rotary amalgamating
barrel, which, though slow, is, under favourable conditions, an
effective amalgamator. The introduction of steam under pressure into an
iron cylinder containing a charge of concentrates with mercury is said
to have produced good results, and I am quite prepared to believe such
would be the case, as we have long known that the application of steam
to ores in course of amalgamation facilitates the process considerably.

Some seventeen years since I was engaged on the construction of a dry
amalgamator in which sublimated mercury was passed from a retort through
the descending gangue in a vertical cylinder, the material thence
falling through an aperture into a revolving settler, the object being
to save water on mines in dry country. The model, about quarter size,
was completed when my attention was called to an American invention,
in which the same result was stated to be attained more effectively by
blowing the mercury spray through the triturated material by means of
a steam jet. I had already encountered a difficulty, since found so
obstructive by experimentalists in the same direction, that is,
the getting of the mercury back into its liquid metallic form. This
difficulty I am now convinced can be largely obviated by my own device
of using a very weak solution of sulphuric acid (it can hardly be
too weak) and adding a small quantity of zinc to the mercury. It is
perfectly marvellous how some samples of mercury "sickened" or "floured"
by bad treatment, may be brought back to the bright limpid metal by a
judicious use of these inexpensive materials.

Thus it will probably be found practicable to crush dry and amalgamate
semi-dry by passing the material in the form of a thin pasty mass to a
settler, as in the old South American arrastra, and, by slowly stirring,
recover the mercury, and with it the bulk of the gold.

The following is from the _Australian Mining Standard_, and was headed
"Amalgamation Without Overflow":

"Recent experiments at the Ballarat School of Mines have proved that a
deliverance from difficulties is at hand from an unexpected quarter.
The despised Chilian mill and Wheeler pan, discarded at many mines, will
solve the problem, but the keynote of success is amalgamation without
overflow. Dispense with the overflow and the gold is saved.

"Two typical mines--the Great Mercury Proprietary Gold Mine, of
Kuaotunu, N.Z., the other, the Pambula, N.S.W.--have lately been
conducting a series of experiments with the object of saving their fine
gold in an economical manner. The last and best trials made by these
companies were at the Ballarat School of Mines, where amalgamation
without overflow was put to a crucial test, in each case with the
gratifying result that ninety-six per cent of the precious metal was
secured. What this means to the Great Mercury Mine, for instance, can
easily be imagined when it is understood that notwithstanding all the
latest gold-saving adjuncts during the last six months 1260 tons of ore,
worth 4l. 17s. 10 2_3d. a ton, have been put through for a saving of 1l.
9s. 1 2_3d. only; or in other words over two-thirds of the gold has gone
to waste (for the time being) in the tailings, and in the tailings
at the present moment lie the dividends that should have cheered
shareholders' hearts.

"And now for the _modus operandi_, which, it must be remembered, is not
hedged in by big royalties to any one, rights, patent or otherwise. The
ore to be treated is first calcined, then put through a rock-breaker
or stamper battery in a perfectly dry state. If the battery is used,
ordinary precautions, of course, must be taken to prevent waste, or the
dust becoming obnoxious to the workmen. The ore is then transferred
to the Chilian mill and made to the consistency of porridge, the
quicksilver being added. When the principal work of amalgamation is done
(experience soon teaching the amount of grinding necessary), from the
Chilian mill the paste (so to say) is passed to a Wheeler or any
other good pan of a similar type, when the gold-saving operation is
completed."

This being an experiment in the same direction as my own, I tried it on
a small scale. I calcined some very troublesome ore till it was fairly
"sweet," triturated it, and having reduced it with water to about the
consistency of invalid's gruel, put it into a little berdan pan made
from a "camp oven," which I had used for treating small quantities of
concentrates, and from time to time drove a spray of mercury, wherein a
small amount of zinc had been dissolved, into the pasty mass by means
of a steam jet, added about half an ounce of sulphuric acid and kept the
pan revolving for several hours. The result was an unusually successful
amalgamation and consequent extraction--over ninety per cent.

Steam--or to use the scientific term, hydro-thermal action--has played
such an important part in the deposition of metals that I cannot but
think that under educated intelligence it will prove a powerful agent
in their extraction. About fourteen years ago I obtained some rather
remarkable results from simply boiling auriferous ferro-sulphides in
water. There is in this alone an interesting, useful, and profitable
field for investigation and experiment.

The most scientific and perfect mode of gold extraction (when the
conditions are favourable) is lixiviation by means of chlorine,
potassium cyanide, or other aurous solvent, for by this means as much as
98 per cent of the gold contained in suitable ores can be converted into
its mineral salt, and being dissolved in water, re-deposited in metallic
form for smelting; but lode stuff containing much lime would not be
suitable for chlorination, or the presence of a considerable proportion
of such a metal as copper, particularly in metallic form, would be fatal
to success, while cyanide of potassium will also attack metals other
than gold, and hence discount the effect of this solvent.

The earlier practical applications of chlorine to gold extraction were
known as Mears' and Plattner's processes, and consisted in placing the
material to be operated on in vats with water, and introducing chlorine
gas at the bottom, the mixture being allowed to stand for a number
of hours, the minimum about twelve, the maximum forty-eight. The
chlorinated water was then drawn off containing the gold in solution
which was deposited as a brown powder by the addition of sulphate of
iron.

Great improvements on this slow and imperfect method have been made of
late years, among the earlier of which was that of Messrs. Newbery
and Vautin. They placed the pulp with water in a gaslight revolving
cylinder, into which the chlorine was introduced, and atmospheric air to
a pressure of 60 lb. to the square inch was pumped in. The cylinder with
its contents was revolved for two hours, then the charge was withdrawn
and drained nearly dry by suction, the resultant liquid being slowly
filtered through broken charcoal on which the chloride crystals were
deposited, in appearance much like the bromo-chlorides of silver ore
seen on some of the black manganic oxides of the Barrier silver
mines. The charcoal, with its adhering chlorides, was conveyed to the
smelting-house and the gold smelted into bars of extremely pure metal.
Messrs. Newbery and Vautin claimed for their process decreased time for
the operation with increased efficiency.

At Mount Morgan, when I visited that celebrated mine, they were using
what might be termed a composite adaptation process. Their chlorination
works, the largest in the world, were putting through 1500 tons per
week. The ore as it came from the mine was fed automatically into Krom
roller mills, and after being crushed and sifted to regulation gauge was
delivered into trucks and conveyed to the roasting furnaces, and thence
to cooling floors, from which it was conveyed to the chlorinating
shed. Here were long rows of revolving barrels, on the Newbery-Vautin
principle, but with this marked difference, that the pressure in the
barrel was obtained from an excess of the gas itself, generated from a
charge of chloride of lime and sulphuric acid. On leaving the barrels
the pulp ran into settling vats, somewhat on the Plattner plan, and
the clear liquid having been drained off was passed through a charcoal
filter, as adopted by Newbery and Vautin. The manager, Mr. Wesley Hall,
stated that he estimated cost per ton was not more than 30s., and he
expected shortly to reduce that when he began making his own sulphuric
acid. As he was obtaining over 4 oz. to the ton the process was paying
very well, but it will be seen that the price would be prohibitive for
poor ores unless they could be concentrated before calcination.

The Pollok process is a newer, and stated to be a cheaper mode of
lixiviation by chlorine. It is the invention of Mr. J. H. Pollok, of
Glasgow University, and a strong Company was formed to work it. With him
the gas is produced by the admixture of bisulphate of sodium (instead
of sulphuric acid, which is a very costly chemical to transport)
and chloride of lime. Water is then pumped into a strong receptacle
containing the material for treatment and powerful hydraulic pressure is
applied. The effect is stated to be the rapid change of the metal into
its salt, which is dissolved in the water and afterwards treated with
sulphate of iron, and so made to resume its metallic form.

It appears, however, to me that there is no essential difference in the
pressure brought to bear for the quickening of the process. In each case
it is an air cushion, induced in the one process by the pumping in of
air to a cylinder partly filled with water, and in the other by pumping
in water to a cylinder partly filled with air.

The process of extracting gold from lode stuff and tailings by means
of cyanide of potassium is now largely used and may be thus briefly
described:--It is chiefly applied to tailings, that is, crushed ore
that has already passed over the amalgamating and blanket tables. The
tailings are placed in vats, and subjected to the action of solutions
of cyanide of potassium of varying strengths down to 0.2 per cent. These
dissolve the gold, which is leached from the tailings, passed through
boxes in which it is precipitated either by means of zinc shavings,
electricity, or to the precipitant. The solution is made up to its
former strength and passed again through fresh tailings. When the
tailings contain a quantity of decomposed pyrites, partly oxidised, the
acidity caused by the freed sulphuric acid requires to be neutralised by
an alkali, caustic soda being usually employed.

When "cleaning up," the cyanide solution in the zinc precipitating boxes
is replaced by clean water. After careful washing in the box, to cause
all pure gold and zinc to fall to the bottom, the zinc shavings are
taken out. The precipitates are then collected, and after calcination in
a special furnace for the purpose of oxidising the zinc, are smelted in
the usual manner.

The following description of an electrolytic method of gold deposition
from a cyanide solution was given by Mr. A. L. Eltonhead before the
Engineers' Club of Philadelphia.

A description of the process is as follows:--"The ore is crushed to a
certain fineness, depending on the character of the gangue. It is then
placed in leaching vats, with false bottoms for filtration, similar
to other leaching plants. A solution of cyanide of potassium and other
chemicals of known percentage is run over the pulp and left to stand
a certain number of hours, depending on the amount of metal to be
extracted. It is then drained off and another charge of the same
solution is used, but of less strength, which is also drained. The pulp
is now washed with clean water, which leaches all the gold and silver
out, and leaves the tailings ready for discharge, either in cars or
sluiced away by water, if it is plentiful.

"The chemical reaction of cyanide of potassium with gold is as follows,
according to Elsner:--

2Au + 4KCy + O + H2O = 2KAuCy2 + 2KHO.

"That is, a double cyanide of gold and potassium is formed.

"All filtered solutions and washings from the leaching vats are saved
and passed through a precipitating 'box' of novel construction, which
may consist either of glass, iron or wood, and be made in any shape,
either oval, round, or rectangular--if the latter, it will be about 10
ft. long, 4 ft. wide and 1 ft. high--and is partitioned off lengthwise
into five compartments. Under each partition, on the inside or bottom of
the 'box,' grooves may be cut a quarter-to a half-inch deep, extending
parallel with the partitions to serve as a reservoir for the amalgam,
and give a rolling motion to the solution as it passes along and through
the four compartments. The centre compartment is used to hold the lead
or other suitable anode and electrolyte.

"The anode is supported on a movable frame or bracket, so it may be
moved either up or down as desired, it being worked by thumb-screws at
each end.

"The electrolyte may consist of saturated solutions of soluble alkaline
metals and earth. The sides or partitions of each compartment dip into
the mercury, which must cover the 'box' evenly on the bottom to the
depth of about a half-inch.

"Amalgamated copper strips or discs are placed in contact with the
mercury and extended above it, to allow the gold and silver solution of
cyanide to come in contact.

"The electrodes are connected with the dynamo; the anode of lead being
positive and the cathode of mercury being negative. The dynamo is
started, and a current of high amperage and low voltage is generated,
generally 100 to 125 amperes, and with sufficient pressure to decompose
the electrolyte between the anode and the cathode.

"As the gas is generated at the anode, a commotion is created in the
liquid, which brings a fresh and saturated solution of electrolyte
between the electrodes for electrolysis, and makes it continuous in its
action.

"The solution of double cyanide of gold, silver, and potassium, which
has been drained from the leaching vats, is passed over the mercury in
the precipitating 'box' when the decomposition of the electrolyte by the
electric current is being accomplished, the gold and silver are set
free and unite with the mercury, and are also deposited on the plates or
discs of copper, forming amalgam, which is collected and made marketable
by the well known and tried methods. The above solution is regenerated
with cyanide of potassium by the setting free of the metals in the
passage over the 'box.'

"In using this solution again for a fresh charge of pulp, it is
reinforced to the desired percentage, or strengthened with cyanide
of potassium and other chemicals, and is always in good condition for
continuing the operation of dissolving.

"The potassium acting on the water of the solution creates nascent
hydrogen and potassium hydrate; the nascent hydrogen sets free the
metals (gold and silver), which are precipitated into the mercury and
form amalgam, leaving hydrocyanic acid; this latter combines with
the potassium hydrate of the former reaction, thus forming cyanide of
potassium. There are other reactions for which I have not at present the
chemical formulas.

"As the solution passes over the mercury, the centre compartment of the
'box' is moved slowly longitudinally, which spreads the mercury, the
solution is agitated and comes in perfect contact with the mercury, as
well as the amalgamated plates or discs of copper, ensuring a perfect
precipitation.

"It is not always necessary to precipitate all the gold and silver from
the solution, for it is used over and over again indefinitely; but when
it is required, it can be done perfectly and cheaply in a very short
time.

"No solution leached from the pulp, containing cyanide of potassium,
gold and silver, need be run to waste, which is in itself an enormous
saving over the use of zinc shavings when handling large quantities of
pulp and solution.

"Some of the advantages the electro-chemical process has over other
cyanide processes are: Its cleanliness, quickness of action, cheapness,
and large saving of cyanide of potassium by regeneration; not wasting
the solutions, larger recovery of the gold and silver from the
solutions; the cost of recovery less; the loss of gold, silver, and
cyanide of potassium reduced to a minimum; the use of caustic alkali in
such quantity as may be desired to keep the cyanide solution from
being destroyed by the solidity of the pulp, and also sometimes to give
warmth, as a warm cyanide solution will dissolve gold and silver quicker
than a cold one. These caustic alkalies do not interfere with or prevent
the perfect precipitation of the metals. The bullion recovered in this
process is very fine, while the zinc-precipitated bullion is only about
700 fine.

"The gold and silver is dissolved, and then precipitated in one
operation, which we know cannot be done in the 'chlorination
process'; besides, the cost of plant and treatment is much less in the
above-described process.

"The electro-chemical process, which I have hastily sketched will, I
think, be the future cheap method of recovering fine or flour gold from
our mines and waste tailings or ore dumps.

"Without going into details of cost of treatment, I will state that with
a plant of a capacity of handling 10,000 tons of pulp per month,
the cost should not exceed 8s. per ton, but that may be cheapened by
labour-saving devices. There being no expensive machinery, a plant could
be very cheaply erected wherever necessary."



CHAPTER VIII

CALCINATION OR ROASTING OF ORES

The object of calcining or roasting certain ores before treatment is
to dissipate the sulphur or sulphides of arsenic, antimony, lead,
etc., which are inimical to treatment, whether by ordinary mercuric
amalgamation or lixiviation. The effect of the roasting is first to
sublimate and drive off as fumes the sulphur and a proportion of the
objectionable metals. What is left is either iron oxide, "gossan," or
the oxides of the other metals. Even lead can thus be oxidised, but
requires more care as it melts nearly as readily as antimony and is
much less volatile. The oxides in the thoroughly roasted ore will not
amalgamate with mercury, and are not acted on by chlorine or cyanogen.

To effect the oxidation of sulphur, it is necessary not only to bring
every particle of sulphur into contact with the oxygen of the air, but
also to provide adequate heat to the particles sufficient to raise them
to the temperature that will induce oxidation. No appreciable effect
follows the mere contact of air with sulphur particles at atmospheric
temperature; but if the particles be raised to a temperature of 500
degrees Fahr., the sulphur is oxidised to the gaseous sulphur dioxide.
The same action effects the elimination of the arsenic and antimony
associated with gold and silver ores, as when heated to a certain
constant temperature these metals readily oxidise.

The science of calcination consists of the method by which the sulphide
ores, having been crushed to a proper degree of fineness, are raised
to a sufficient temperature and brought into intimate contact with
atmospheric air.

It will be obvious then that the most effective method of roasting
will be one that enables the particles to be thoroughly oxidised at the
lowest cost in fuel and in the most rapid manner.

The roasting processes in practical use may be divided into three
categories:

_First or A Process._--Roasting on a horizontal and stationary hearth,
the flame passing over a mass of ore resting on such hearth. In order to
expose the upper surface of the ore to contact with air the material is
turned over by manual labour. This furnace of the reverberatory type is
provided with side openings by which the turning over of the ore can
be manually effected, and the new ore can be charged and afterwards
withdrawn.

_Second or B Process._--Roasting in a revolving hearth placed at a
slight incline angle from the horizontal. The furnace is of cylindrical
form and is internally lined with refractory material. It has
projections that cause the powdered ore to be lifted above the flame,
and, at a certain height, to fall through the flame and so be rapidly
raised to the temperature required to effect the oxidation of the
oxidisable minerals which it is desired to extract.

The rate, or speed, of revolution of this revolving furnace obviously
depends upon the character of the ore under treatment; it may vary from
two revolutions per minute down to one revolution in thirty minutes. Any
kind of fuel is available, but that of a gaseous character is stated to
be by far the most efficient.

Any ordinary cylinder of a length of 25 ft., and a diameter of 4 ft. 6
in., inclined 1 ft. 6 in. in its length, will calcine from 24 to 48 tons
per diem.

Another form of rotating furnace is one in which the axis is horizontal.
It is much shorter than the inclined type, and the feeding and removal
of the ore is effected by the opening of a retort lid door provided at
the side of the furnace. Openings provided at each end of the furnace
permit the passage of the flame through it, and the revolution of the
furnace turns over the powdered ore and brings it into more or less
sustained contact with the oxidising flame. The exposure of the ore to
this action is continued sufficiently long to ensure the more or less
complete oxidation of the ore particles.

_Third or C Process._--In this process the powdered ore is allowed to
fall in a shower from a considerable height, through the centre of a
vertical shaft up which a flame ascends; the powdered ore in falling
through the flame is heated to an oxidising temperature, and the
sulphides are thus depleted of their sulphur and become oxides.

Another modification of this direct fall or shaft furnace is that in
which the fall of the ore is checked by cross-bars or inclined plates
placed across the shaft; this causes a longer oxidising exposure of the
ore particles.

When the sulphur contents of pyritous ores are sufficiently high, and
after the ore has been initially fired with auxiliary carbonaceous fuel,
it is unnecessary, in a properly designed roasting furnace, to add
fuel to the ore to enable the heat for oxidation to be obtained. The
oxidation or burning of the sulphur will provide all the heat necessary
to maintain the continuity of the process. The temperature necessary for
effecting the elimination of both sulphur and arsenic is not higher
than that equivalent to dull red heat; and provided that there is a
sufficient mass of ore maintained in the furnace, the potential heat
resulting from the oxidation of the sulphur will alone be adequate to
provide all that is necessary to effect the calcination.


TYPES OF FURNACES OF THE DIFFERENT CLASSES THAT ARE IN ACTUAL USE.

"A" OR REVERBERATORY CLASS.

The construction of this furnace has already been sufficiently
described. If the roasting is performed in a muffle chamber, the
arrangement employed by Messrs. Leach and Neal, Limited, of Derby, and
designed by Mr. B. H. Thwaite, C.E., can be advantageously employed in
this furnace, which is fired with gaseous fuel. The sensible heat of the
waste gases is utilised to heat the air employed for combustion; and by
a controllable arrangement of combustion, a flame of over 100 feet in
length is obtained, with the result that the furnace from end to end is
maintained at a uniform temperature. By this system, and with gaseous
fuel firing, a very considerable economy in fuel and in repairs to
furnace, and a superior roasting effect, have been obtained.

Where the ordinary reverberatory hearth is fired with solid coal from
an end grate, the temperature is at its maximum near the firing end, and
tails off at the extreme gas outlet end. The ores in this furnace should
therefore be fed in at the colder end of the hearth and be gradually
worked or "rabbled" forward to the firing end.

One disadvantage of the reverberatory furnace is the fact that it is
impossible to avoid the incursion of air during the manual rabbling
action, and this tends to cool the furnace.

The cost of roasting, to obtain the more or less complete oxidation, or
what is known in mining parlance as a "sweet roast" (because a perfectly
roasted ore is nearly odourless) varies considerably, the variation
depending of course upon the character of the ore and the cost of labour
and fuel.

There are several modifications of the reverberatory furnace in use,
designed mechanically to effect the rabbling. One of the most successful
is that known as the Horse-shoe furnace. In plan the hearth of the
furnace resembles a horse-shoe.

The stirring of the ore over the hearth is effected by means of
carriages fixed in the centre of the furnace and having laterally
projecting arms, carrying stirrers, that move along the hearth and turn
over the pulverised ore.

In operation, half the carriages are traversing the furnace, and half
are resting in the cooling space, so that a control over the temperature
of the stirrers is established.

This furnace is stated to be more economical in labour than other
mechanically stirred reverberatory furnaces, and there is also said to
be an economy in fuel.

Usually the mechanical stirring furnaces give trouble and should be
avoided, but the horse-shoe type possesses qualifications worthy of
consideration.

"B."--THE REVOLVING CYLINDER FURNACE.

Of these the best known to me are: The Howell-White, the Bruckner, the
Thwaite-Denny, and the Molesworth.

The Bruckner is a cylinder, turning on the horizontal axis and carried
by four rollers.

The batch of ore usually charged into the two charging hoppers weighs
about four tons. When the two charging doors are brought under the
hopper mouth, the contents of the hopper fall directly into the
cylinder.

The ends or throats of the furnace are reduced just sufficiently to
allow the flame evolved from a grated furnace to pass completely through
the cylinder.

A characteristic size for this Bruckner furnace is one having a length
of 12 feet and a diameter of 6 feet. A furnace of this capacity will
have an inclusive weight (iron and brickwork) of 15 tons.

The time of operation, with the Bruckner, will vary with the character
of the ore under treatment and the nature of the fuel employed. Four
hours is the minimum and twelve hours should be the maximum time of
operation.

By the addition of common salt with the batch of ore, such of its
constituents as are amenable to the action of chlorine are chlorinated
as well as freed from sulphur.

Where the ore contains any considerable quantity of silver which should
be saved, the addition of the salt is necessary as the silver is very
liable to become so oxidised in the process of roasting as to render
its after treatment almost impossible. I know a case in point where an
average of nearly five ounces of silver to the ton, at that time worth
30s., was lost owing to ignorance on this subject. Had the ore been
calcined with salt, NaCl, the bulk of this silver would have been
amalgamated and thus saved. It was the extraordinary fineness of the
gold saved by amalgamation as against my tests of the ore by fire assay
that put me on the track of a most indefensible loss.

_The Howell-White Furnace._--This furnace consists of a cast iron
revolving cylinder, averaging 25 feet in length and 4 ft. 4 in. in
diameter, which revolves on four friction rollers, resting on truck
wheels, rotated by ordinary gearing.

The power required for effecting the revolution should not exceed four
indicated horse-power.

The cylinder is internally lined with firebrick, projecting pieces
causing the powdered ore to be raised over the flame through which it
showers, and is thereby subjected to the influence of heat and to direct
contact oxidation.

The inclination of the cylinder, which is variable, promotes the gradual
descension of the ore from the higher to the lower end. It is fed into
the upper end, by a special form of feed hopper, and is discharged into
a pit at the lower end, from which the ore can be withdrawn at any time.

The gross weight of the furnace, which is, however, made in segments to
be afterwards bolted together, is some ninety to one hundred tons.

The furnace is fired with coal on a grated hearth, built at the lower
end; it is more economical both in fuel and in labour than an ordinary
reverberatory furnace.

_The Thwaite-Denny Revolving Furnace._--This new type of furnace, which
is fired with gaseous fuel, is stated to combine the advantages of the
Stetefeldt, the Howell-White, and the Bruckner.

It is constructed as follows:--Three short cylinders, conical in shape
and of graduated dimensions, are superimposed one over the other, their
ends terminating in two vertical shafts of brickwork, by which the three
cylinders are connected. The powdered ore is fed into the uppermost
cylinder and gravitates through the series. The highest cylinder is the
largest in diameter, the lowest the smallest.

The gas flame, burnt in a Bunsen arrangement, enters the smallest end
of the lowest cylinder and passes through it; then returns through the
series and the ore is reduced by the expulsion of its sulphur, arsenic,
etc., as it descends from the top to the bottom. The top cylinder is
made larger than the one below it and the middle cylinder is made larger
than the lowest one in proportion to the increased bulk of gases and
ore.

The powdered ore in descending through the cylinders is lifted up and
showers through the flame, falling in its descent a distance of over
1000 feet. By the time it reaches the bottom the ore is thoroughly
roasted.

Provision is made for the introduction of separate supplies of air
and gas into each cylinder; this enables the oxidising treatment to be
controlled exactly as desired so as to effect the best results with all
kinds of ore. Each cylinder is driven from its own independent gearing,
and the speed of each cylinder can be varied at will.

The output of this type of furnace, the operations of which appear to be
more controllable than those of similar appliances, depends, of course,
upon the nature of the ore, but may be considered to range within the
limits of twelve to fifty tons in twenty-four hours, and the cost of
roasting will vary from 2s. 6d. to 4s. per ton, depending upon the
quality of ore and of fuel.

The gaseous fuel generating system permits not only the absolute control
over the temperature in the furnace, but the use of the commonest kinds
of coal, and even charcoal is available.

The power required to drive the Thwaite-Denny furnace is four indicated
horse-power.

_The Molesworth Furnace_ also is a revolving cylindrical appliance,
which, to say the least of it, is in many respects novel and ingenious.
It consists of a slightly cone-shaped, cast-iron cylinder about fourteen
feet long, the outlet end being the larger to allow for the expansion of
the gases. Internal studs are so arranged as to keep the ore agitated;
and spiral flanges convey it to the outlet end continually, shooting
it across the cylinder. The cylinder is encased in a brick furnace. The
firing is provided from _outside_, the inventor maintaining that the
products of combustion are inimical to rapid oxidisation, to specially
promote which he introduces an excess of oxygen produced in a small
retort set in the roof of the furnace and fed from time to time with
small quantities of nitrate of soda and sulphuric acid. Ores containing
much sulphur virtually calcine themselves. I have seen this appliance
doing good work. The difficulties appeared to be principally mechanical.

There are other furnaces which work with outside heat, but I have not
seen them in action.

"C."--SHAFT TYPE OF FURNACE

In one form of this furnace, instead of allowing the ore to descend in
a direct clear fall the descent is impeded by inclined planes placed at
different levels in the height of the shaft, the ore descending from one
plane to the other.

_The Stetefeldt Shaft Furnace._--Although very expensive in first cost,
has many advantages. No motive power is required and the structure of
the furnace is of a durable character. Its disadvantages are:--Want
of control, and the occasionally imperfect character of the roasting
originating therefrom.

Three sizes of Stetefeldt's furnaces are constructed:

The largest will roast from 40 to 80 tons per diem.

The intermediate will roast from 20 to 40 tons per diem.

The smallest will roast from 10 to 20 tons per diem.

A good furnace should bring down the sulphur contents even of
concentrates so as to be innocuous to mercuric amalgamation. The sulphur
left in the ore should never be allowed to exceed two per cent.

A forty per cent pyritous or other sulphide ore should be roasted in a
revolving furnace in thirty to forty minutes, and without any auxiliary
fuel.

For ordinary purposes a 40-foot chimney is adequate for furnace work;
such a chimney four feet square inside at the base, tapering to 2' 6" at
the summit, will require 12,000 red bricks, and 1500 fire-bricks for
an internal lining to a height of 12 feet from the base of the chimney
shaft.

When second-hand Lancashire or Cornish boiler flues are available, they
make admirable and inexpensive chimneys. The advantage of wrought-iron
or steel chimneys lies in the convenience of removal and erection. They
should be made in sections of 20 feet long, three steel wire guy-ropes
attached to a ring, riveted to a ring two-thirds of the height of the
chimney, and attached to holdfasts driven into the ground; tightening
couplings should be provided for each wire.

Flue dust depositing chambers should be built in the line of the flues
between the furnace and the chimney; they consist simply of carefully
built brick chambers, with openings to enable workmen to enter and
rapidly clear away the deposited matters. The chambers, three or four
times the cross sectional area of the chimney flue, and ten to twenty
feet long, can be built of brickwork, set in cement; the walls are
provided with a cavity, filled with sand or Portland cement, so that
there will be no danger of the incursion of air. In all furnace work
the greatest possible precautions should be taken to prevent the least
cracking of either joints or bricks. It is surprising how much the
inadequate draft of a good chimney is due to cracks or orifices in the
flues; and therefore a competent furnace-man should see to it that his
flues are thoroughly sound, and free from openings through which the air
can enter.[*]

     [*] For full details of the most recent improvements in the
     cyanide process and in other methods of extraction, the
     reader is referred to Dr. T. K. Rose's "Metallurgy of Gold,"
     third edition.




CHAPTER IX

MOTOR POWER AND ITS TRANSMISSION

It is unnecessary to describe methods by which power for mining purposes
has been obtained--that is, up to within the last five years--beyond
a general statement, that when water power has been available in the
immediate locality of the mine, this cheap natural source of power has
been called upon to do duty. Steam has been the alternative agent of
power production applied in many different ways, but labouring under as
many disadvantages, chief of which are lack of water, scarcity of fuel
and cost of transit of machinery. Sometimes condensing steam-engines
have been employed. For the generation of steam the semi-portable and
semi-tubular have been the type of boiler that has most usually been
brought into service. Needless to say, when highly mineralised mine
water only is available the adoption of this class of boiler is attended
with anything but satisfactory results.

Recently, however, there is strong evidence that where steam is the
power agent to be employed the water-tube type of boiler is likely to be
employed, and to the exclusion of all other forms of apparatus for
the generation of steam. The advantages of this type, particularly the
tubulous form (or a small water tube), made as it is in sections, offers
unrivalled facilities for transport service. The heaviest parts need
not exceed 3 cwt. in weight, and require neither heavy nor yet expensive
brickwork foundations.


WATERLESS POWER.

The difficulties in finding water to drive a steam plant are often of
such a serious character as to involve the abandonment of many payable
mines; therefore, a motive power that does not require the aqueous agent
will be a welcome boon.

It will be a source of gratification to many a gold-claim holder to know
that practical science has enabled motive power to be produced without
the necessity of water, except a certain very small quantity, which once
supplied will not require to be renewed, unless to compensate for the
loss due to atmospheric evaporation.

Any carbonaceous fuel, such as, say, lignite, coal, or charcoal, can be
employed. The latter can be easily produced by the method described
in the Chapter on "Rules of Thumb," or by building a kiln by piling
together a number of trunks of trees, or fairly large-sized branches,
cut so that they can be built up in a compact form. The pile, after
being covered with earth, is then lighted from the base, and if there
are no inlets for the air except the limited proportion required for the
smouldering fire at the base, the whole of the timber will be gradually
carbonised to charcoal of good quality, which is available for the
waterless power plant.

The waterless power plant consists of two divisions: First, a gas
generating plant; secondly, an internal combustion or gas engine in
which the gas is burnt, producing by thermo-dynamic action the motive
power required. The system known as the Thwaite Power Gas System is not
only practically independent of the use of water, but its efficiency in
converting fuel heat into work is so high that no existing steam plant
will be able to compete with it.

The weight of raw timber, afterwards to be converted into charcoal, that
will be required to produce an effective horse-power for one hour equals
7 lb.

If coal is the fuel 1 1/3 lb. per E.H.P. for one hour's run.

If lignite is the fuel 2 1/2 lb. per E.H.P. for one hour's run.

The plant is simple to work, and as no steam boiler is required the
danger of explosions is removed. No expensive chimney is necessary for
the waterless power plant.

Where petroleum oil can be cheaply obtained, say for twopence per
gallon, one of the Otto Cycle Oil Engines, for powers up to 20 indicated
horse-power, can be advantageously employed.

These engines have the advantage of being a self-contained power,
requiring neither chimney nor steam boiler, and may be said to be a
waterless power. The objection is the necessity to rely upon oil as
fuel, and the dangers attending the storage of oil. A good oil engine
should not require to use more than a pint of refined petroleum per
indicated horse-power working for one hour.

Fortunately for the mining industry electricity, that magic and
mysterious agency, has come to its assistance, in permitting motive
power to be transmitted over distances of even as much as 100 miles with
comparatively little loss of the original power energy.

Given, that on a coal or lignite field, or at a waterfall, 100
horse-power is developed by the combustion of fuel or by the fall of
water driving a turbine, this power can be electrically transmitted to a
mine or GROUP OF MINES, say 100 miles away, with only a loss of some 30
horse-power. For twenty miles the loss on transmission should not exceed
15 horse-power so that 70 and 85 horse-power respectively are available
at the mines. No other system offers such remarkable efficiencies of
power transmission. The new Multiphase Alternating Electric Generating
and Power Transmission System is indeed so perfect as to leave
practically no margin for improvement.

The multiphase electric motor can be directly applied to the stamp
battery and ore-breaker driving-shaft and to the shaft of the
amalgamating pans.

     APPROXIMATE POWER REQUIRED TO DRIVE THE MACHINERY OF A MINE.

     Rock breaker                           10    effective horse-power
     Amalgamating pan                        5    effective horse-power
     Grinding pan                            6    effective horse-power
     Single stamp of 750 lb. dropping
     90 times per minute                   1.25 effective horse-power
     Settlers                                4    effective horse-power
     Ordinary hoisting lift                  20   effective horse-power

     Allow 10 per cent in addition for overcoming friction.

Besides this electrical distribution power, which should not cost more
than three farthings per effective horse-power per hour, the electrical
energy can be employed for lighting the drives and the shafts of the
mine. The modern electrical mine lamps leave little to be desired. Also
it is anticipated that once the few existing difficulties have been
surmounted electric drilling will supplant all other methods.

Electric power can be employed for pumping, for shot firing, for
hauling, and for innumerable purposes in a mine.

Electricity lends itself most advantageously to so many and varied
processes, even in accelerating the influence of cyanide solutions on
gold, and in effecting the magnetic influence on metallic particles
in separating processes; while applied to haulage purposes, either on
aerial lines or on tram or railroads, it is an immediate and striking
success.

It is anticipated that in the near future the mines on the Randt, South
Africa, will be electrically driven from a coalfield generating station
located on the coalfields some thirty miles from Johannesburg. Such
a plant made up of small multiples of highly efficient machines will
enable mine-owners to obtain a reliable power to any extent at immediate
command and at a reasonable charge in proportion to the power used. This
wholesale supply of power will be a godsend to a new field, enabling the
opening up to be greatly expedited; and no climatic difficulties, such
as dry seasons, or floods, need interfere with the regular running of
the machinery. The same system of power-generation at a central station
is to be applied to supply power to the mines of Western Australia.



CHAPTER X

COMPANY FORMATION AND OPERATIONS

All the world over, the operation of winning from the soil and rendering
marketable the many valuable ores and mine products which abound is
daily becoming more and more a scientific business which cannot be too
carefully entered into or too skilfully conducted. The days of the
dolly and windlass, of the puddler, cradle, and tin dish, are rapidly
receding; and mining, either in lode or alluvial working, is being more
generally recognised as one of the exact sciences. In the past, mining
has been carried on in a very haphazard fashion, to which much of its
non-success may be attributed.

But the dawn of better days has arrived, and with the advent of schools
of mines and technical colleges there will in future be less excuse for
ignorance in this most important industry.

This chapter will be devoted to Company formation and working, in which
mistakes leading to very serious consequences daily occur.

It is not necessary to go deeply into the question why, in the mining
industry more than any other, it should be deemed desirable as a general
rule to carry on operations by means of public Companies, but, as a
matter of fact, few names can be mentioned of men who mine extensively
single handed. Yet, risky as it is, mining can hardly be said to be more
subject to unpreventable vicissitudes than, say, pastoral pursuits, in
which private individuals risk, and often lose or make, enormous sums of
money.

However, it is with Mining Companies we are now dealing, and with the
errors made in the formation and after conduct of these Associations.

The initial mistake most often made is that sufficient working capital
is not called up or provided in the floating of the Company. Promoters
trust to get sufficient from the ground forthwith to ensure further
development; the consequence being that, as nearly 99 per cent of mining
properties require a very considerable expenditure of capital before
permanent profits can be relied on, the inexperienced shareholders who
started with inflated hopes of enormous returns and immediate dividends
become disheartened and forfeit their shares by refusing to pay calls,
and thus many good properties are sacrificed. In England, the companies
are often floated fully paid-up, but the same initial error of providing
too little money for the equipment and effective working of the mine is
usually fallen into.

Again, far too many Companies are floated on the report of some
self-styled mining expert, often a man, who, like the schoolmaster of
the last century, has qualified for the position by failing in every
other business he has attempted. These men acquire a few geological and
mining phrases, and by more or less skilfully interlarding these with
statements of large lodes and big returns they supply reports seductive
enough to float the most worthless properties and cause the waste of
thousands of pounds. But the trouble does not end here.

When the Company is to be formed, some lawyer, competent or otherwise,
is instructed to prepare articles of association, rules, etc.; which,
three times out of four, is accomplished by a liberal employment
of scissors and paste. Such rules may, or may not, be suited to the
requirements of the organisation. Generally no one troubles much about
the matter, though on these rules depends the future efficient working
of the Company, and sometimes its very existence.

Then Directors have to be appointed, and these are seldom selected
because of any special knowledge of mining they may possess, but as a
rule simply because they are large shareholders or prominent men whose
names look well in a prospectus. These gentlemen forthwith engage a
Secretary, usually on the grounds that he is the person who has tendered
lowest, to provide office accommodation and keep the accounts; and not
from any particular knowledge he has of the true requirements of the
position.

The way in which some Directors contrive to spend their shareholders'
money is humorously commented on by a Westralian paper which describes
a great machinery consignment lately landed in the neighbourhood of the
Boulder Kalgoorlie.

"It would seem as if the purchaser had been let loose blindfold in a
prehistoric material-founder's old iron yard, and having bought up the
whole stock, had shipped it off. The feature of the entire antediluvian
show is the liberal allowance of material devoted to destruction.
Massive kibbles, such as were used in coal mines half a century ago, are
arranged alongside a winding engine, built in the middle of the century,
and evidently designed for hauling the kibbles from a depth of 1000
feet. Nothing less than horse-power will stir the trucks for underground
use, and their design is distinctly of the antique type. The engine
is built to correspond--of a kind that might have served to raise into
position the pillars of Baalbec, and the mass of metal in it fairly
raises a blush to the iron cheek of frailer modern constructions. The
one grand use to which this monster could be put would be to employ it
as a kedge for the Australian continent in the event of it dragging its
present anchors and drifting down south, but as modern mining machinery
the whole consignment is worth no more than its value as scrap-iron,
which in its present position is a fraction or two less than nothing."

Next, a man to manage the mine has to be obtained, and some one is
placed in charge, of whose capabilities the Directors have no direct
knowledge. Being profoundly ignorant of practical mining they are
incompetent to examine him as to his qualifications, or to check his
mode of working, so as to ascertain whether he is acting rightly or
not. All they have to rely on are some certificates often too carelessly
given and too easily obtained. Finally, quite a large proportion of the
allottees of shares have merely applied for them with the intention of
selling out on the first opportunity at a premium, hence they have no
special interest in the actual working of the mine.

Now let us look at the prospects of the Association thus formed. The
legal Manager or Secretary, often a young and inexperienced man, knows
little more than how to keep an ordinary set of books, and not always
that. He is quite ignorant of the actual requirements of the mine, or
what is a fair price to pay for labour, appliances, or material. He
cannot check the expenditure of the Mining Manager, who may be a rogue
or a fool or both, for we have had samples of all sorts to our sorrow.
The Directors are in like case. Even where the information is honestly
supplied, they cannot judge whether the work is being properly carried
out or is costing a fair price, and the Mining Manager is left to his
own devices, with no one to check him nor any with whom he can consult
in specially difficult cases. Thus matters drift to the almost certain
conclusion of voluntary or compulsory winding up; and so many a
good property is ruined, and promising mines, which have never had a
reasonable trial, are condemned as worthless. But let us ask, would any
other business, even such as are less subject to unforeseen vicissitudes
than mining, succeed under similar circumstances?

It is now very generally agreed that to the profitable development of
mining new countries, at all events, must look mainly for prosperity,
while other industries are growing. Therefore, we cannot too seriously
consider how we may soonest make our mines successful.

What is the remedy for the unsatisfactory state of affairs we have
experienced? The answer is a more practical system of working from the
inception. Although it may evoke some difference of opinion I consider
it both justifiable and desirable that the State should take some
oversight of mining matters, at all events in the case of public
Companies. It would be a salutary rule that the promoters of any mining
undertaking should, before they are allowed to place it on the market,
obtain and pay for the services of a competent Government Mining
Inspector, who need not necessarily be a Government officer, but might,
like licensed surveyors, be granted a certificate of competency either
by a School of Mines or by some qualified Board of Examiners. The
certificate of such Inspector that the property was as represented,
should be given before the prospectus was issued. It is arguable whether
even further oversight might not be properly be taken by the State and
the report of a qualified officer be compulsory that the property was
reasonably worth the value placed upon it in the prospectus.

Probably it will be contended that such restrictions would be an undue
interference with private rights, and the old aphorism about a fool and
his folly will be quoted. There are doubtless fools so infatuated
that if they were brayed in a ten hundred-weight stamp-battery the
"foolishness that had not departed from them" would give a highly
payable percentage to the ton. Yet the State in other matters tries by
numerous laws to protect such from their folly. A man may not sell a
load of wood without the certificate from a licensed weighbridge or a
loaf of bread without, if required, having to prove its weight; and we
send those to gaol who practise on the credulity and cupidity of fools
by means of the "confidence trick." Why not, therefore, where interests
which may be said to be national are involved, endeavour to ensure fair
dealing?

Then with regard to the men who are to manage the mines, seeing that
a man may not become captain or mate of a river steamboat without some
certificate on competency, nor drive her engines before he has passed an
examination to prove his fitness, surely it is not too much to say that
the mine manager or engineer, to whose care are often confided the lives
of hundreds of men, and the expenditure of thousands of pounds, should
be required to obtain a recognised diploma to prove his qualifications.
The examinations might be made comparatively easy at first, but
afterwards, when by the establishment of Schools and Mines the
facilities have been afforded for men to thoroughly qualify, the
standard should be raised; and after a date to be fixed no man should be
permitted to assume the charge of a mine or become one of its officers
without a proper certificate of competency from some recognised School
of Mines or Technical College. The effect of such a regulation would in
a few years produce most beneficial results.

In New Zealand, whose "progressive" legislature I do not generally
commend, they have, in the matter of mine management, at all events,
taken a step in the right direction. There a mine manager, before
he obtains his certificate, must have served at least two years
underground, and has to pass through a severe examination, lasting for
days, in all subjects relating to mining and machinery connected with
mining. In addition, he must prove his capacity by making an underground
survey, and then plotting his work. The examination is a stiff one,
as may be judged from the fact that between 1886 and 1891, only 27
candidates passed. Then the conditions were made easier, and from that
date to 1895, 19 passed. Of the 46 students who gained first-class
honours, 30 have left for South Africa or Australia, in both of which
countries New Zealand certificated men are held in high estimation.

But returning to the formation of the Company, care should be taken in
appointing Directors that at least one member of the Board is selected
on account of his special technical knowledge of mining, and others for
their special business capacity. The ornamental men with high sounding
names should not be required in legitimate ventures. Also, it is most
important that the business Manager or Secretary should be a specially
qualified man, who by experience has learned what are the requirements
of a mine doing a certain amount of work, so that a proper check may
be kept on the expenses. The more Companies such a Secretary has the
better, as one qualified man can supervise a large staff of clerks, who
would themselves be qualifying for similar work, and gaining a useful
and varied experience of mining business. An office of this description
having charge of a large number of mines is, in its way, a technical
school, and lads trained therein would be in demand as mine pursers, a
very responsible and necessary officer in a big mine.

With respect to the men to whom the actual mining and treatment of ores
and machinery is committed the greatest mistakes of the past have been
that too much has been required from one man, a combination not to be
found probably in one man in a thousand. Such Admirable Crichtons are
rare in any profession or business, and that of mining is no exception.
Men who profess too much are to be distrusted. Your best men are they
who concentrate their energies and intellects in special directions.
The Mining Manager should, if possible, be chosen from men holding
certificates of competency from some technical mining school and,
of course, should, in addition, have some practical experience, not
necessarily as Head Manager. He should understand practical mine
surveying and calculation of quantities, be able to dial and plot out
his workings, and prepare an intelligible plan thereof for the use of
the Directors, and should understand sufficient of physics, particularly
pneumatics and hydraulics, to ensure thoroughly efficient pumping
operations without loss of power from unnecessarily heavy appliances.
Any other scientific knowledge applicable to his business which he may
have acquired will tell in his favour, but he must, above all things,
be a thoroughly practical man. Such men will in time be more readily
procurable, as boys who have passed through the various Schools of Mines
will be sent to learn their business practically at the mines just as we
now, having given a lad a course of naval instruction, send him to sea
to learn the practical part of his life's work.

But, of course, more is wanted on a mine than a man who can direct the
sinking of shafts, driving of levels, and stoping of the lode. Much
loss and disappointment have resulted in the past from unsuitable,
ineffective, or badly designed and erected machinery, whether for
working the mine or treating the ores. To obviate this defect a
first-class mining engineer is required.

Then, also, day by day we are more surely learning that mining in all
its branches is a science, and that the treatment of ores and extraction
of the metals is daily becoming more and more the work of the laboratory
rather than of the rule-of-thumb procedure of the past. Every mine,
whether it be of gold, silver, tin, copper, or other metal, requires the
supervision of a thoroughly qualified metallurgist and chemist, and one
who is conversant with the newest processes for the extraction of the
metals from their ores and matrices.

It has then been stated that to ensure effective working each mine
requires, in addition to competent directors, a business manager,
mining-manager, and assistants, engineer, chemist, and metallurgist,
with assistant assayers, etc., all highly qualified men. But it will be
asked, how are many struggling mines in sparsely populated countries
to obtain the services of all these eminent scientists? The reply is by
co-operation. One of the most ruinous mistakes of the past has been that
each little mining venture has started on an independent course, with
different management, separate machinery, etc. Can it then be wondered
at that our gold-mining is not always successful?

Under a co-operative system all that each individual mine would require
would be a qualified, practical miner capable of opening and securing
the ground in a miner-like manner, and a good working engineer; and
in gold-mining, where the gold is free in its matrix, a professional
amalgamator, or lixiviator. For the rest, half a dozen or more mines may
collectively retain the services of a mine manager of high attainments
as general inspector and superintendent, and the same system could be
adopted with respect to an advising metallurgist and an engineer. For
gold, as indeed for other metals, a central extracting works, where the
ores could be scientifically treated in quantity, might be erected at
joint cost, or might easily be arranged for as a separate business.

A very fruitful cause of failure is the fatuous tendency of directors
and mine managers to adopt new processes and inventions simply because
they are new. As an inventor in a small way myself, and one who is
always on the watch for improved methods, I do not wish to discourage
intelligent progress; but the greatest care should be exercised by those
having the control of the money of shareholders in mining properties
before adopting any new machinery or process.

We have seen, and unfortunately shall see, many a promising mining
company brought to grief by this popular error. The directors of mining
companies might, to use an American saying, "paste this in their hats"
as a useful and safe aphorism. "LET OTHERS DO THE EXPERIMENTING; WE ARE
WILLING TO PAY ONLY FOR PROVED IMPROVEMENTS." I can cordially endorse
every word of the following extracts from Messrs. McDermott and
Duffield's admirable little work, "Losses in Gold Amalgamation."

"Some directors of mining companies are naturally inclined to listen to
the specious promises of inventors of novel processes and new machinery,
forgetting their own personal disadvantage in any argument on
such matters, and assuming a confidence in the logic of their own
conclusions, while they ignore the fruitful experience of thousands
of practical men who are engaged in the mining business. The repeated
failures of directors in sending out new machinery to their mines ought
by this time to be a sufficient warning against increasing risks that
are at once natural and unavoidable, and to deter them from plunging
their shareholders into experiments which, in ninety-nine cases out of a
hundred, result in nothing but excessive and needless expenses.

"It is certain that new machines and new processes are, and will be,
given attention by mining men in proportion to their probable merits;
but the proper place for experiments is in a mill already as successful
as under known processes it can be made. In a new enterprise, even when
the expense of an experiment is undertaken by the inventor, the loss to
the mine-owner in case of failure must be very great, both in time
and general running expenses. Directors should not believe that a
willingness to risk cash in proving an invention is necessarily any
proof of value of the same; it is only a measure of the faith of the
inventor, which is hardly a safe standard to risk shareholders' money
by.

"The variety of modifications in approved processes ought at least to
suggest the desirability of exhausting the known, before drawing on the
unknown and purely speculative. It should also be borne in mind that
what might appear at first sight to be new processes, and even new
machinery, are, in fact, often nothing but old contrivances and
plausible theories long ago exploded among practical men.

"Many mining companies have been ruined, without any reference to their
mines, through men deciding on the reasonableness of new process and
machinery who have no knowledge of the business in hand. It is assumed
often, that if an inventor or manufacturer of new machinery will agree
to guarantee success, or take no pay if not successful, the company
takes no risk. In actual fact a whole year is wasted in most cases,
failure spoils the reputation of the company, running expenses have
continued, and further working capital cannot be raised, because
all concerned have lost confidence by the failure to obtain returns
promised. All this in addition to the regular, unavoidable risks of
mining itself, which may, at any moment during the year lost, call
for increased expenses and increased faith in ultimate success. To the
mining man who makes money by the business, the natural risks of mining
is all he will take; it is sufficient; and when he invests more money in
machinery he takes good care that he takes no chances of either failure
or delay.

"The following are rules which no mining company or individual
mine-owner can afford to neglect.

"(1) The risk should be confined to mining. No body of directors is
justified in taking a shareholder's money and investing it in new
processes or machinery when the subscription was simply for a mining
venture. Directors are invariably incapable of deciding whether a
so-called improvement in machinery or process is really so or not, and
the reasonable course is to follow established precedents.

"(2) The risk of selecting an incompetent manager should be reduced to
minimum by taking a man with a successful record in the particular work
to be done. The manager selected should be prohibited, as much as the
directors, from experimenting with new methods or machinery. A really
experienced man will require no check in this direction, as he will not
risk ruining his reputation.

"(3) The only time for a company to experiment is when the mine is
paying well by the usual methods, and the treasury is in a condition to
speculate a little in possible improvements without jeopardising regular
returns."

Probably this is the best place to insert another word of warning to
directors who are not mining specialists, and also to investors in gold
mining shares. Assays of auriferous lode material are almost invariably
worthless as a guide in the real value of the stone in quantity. The one
way to decide this is by battery treatment in bulk, and then only after
many tons have been put through. The reason is obvious. First, the
prospector or company promoter, if he knows it, is not in the least
likely to pick the worst piece of stone in the heap for assay; and,
secondly, even should the sample be selected with the sole object of
getting a fair result, no living man can judge the value of a gold lode
by the result of treatment of an ounce of stone. So when you see it
stated that Messrs. Oro and Gildenstein, the celebrated assayers, have
found that a sample of rock from the Golden Mint Mine, Golconda, assays
at the rate of 2,546 oz. 13 dwt. and 21 gr. to the ton, and that there
are thousands of tons of similar stone in sight, the statement should
be received with due caution. The assay is doubtless correct, but the
deductions therefrom are most misleading.

A few words of advice also to directors of mine-purchasing companies and
syndicates, of which there are now so many in existence, may probably be
found of value. It is not good policy as a general rule to buy entirely
undeveloped properties, unless such have been inspected by your own man,
who is both competent and trustworthy, and who should have indeed an
interest in the profits. Large areas, although so popular in England,
do not compensate for large bodies of payable ore; the most remunerative
mine is generally one of comparatively small area, but containing a
large lode formation of payable but often low grade, ore.

It is worse still, of course, to buy a practically worked out mine,
though this too is sometimes done. It must be remembered that mining,
though often so profitable, is nevertheless a destructive industry, thus
differing from agriculture, which is productive, and manufactures, which
are constructive. Every ton of stone broken and treated from even the
best gold mine in the world makes that mine the poorer by one ton of
valuable material; thus, to buy a mining property on its past reputation
for productiveness is, as a rule, questionable policy, unless you know
there is sufficient good ore in sight to cover the purchase cost and
leave a profit.

One of the greatest causes of non-success of gold-mining ventures,
particularly when worked by public companies, is the lack of actual
personal supervision, and hence, among other troubles, is that
ultra-objectionable one--gold stealing from the mills, or, in alluvial
mining, from the tail races. As to the former, the following appeared
in 1893 in the London _Mining Journal_, and is, I think, worthy of the
close consideration of mine directors in all parts of the world:--

"No one that has not experienced the evil of gold thieving from
reduction mills can have any idea of the pernicious element it is, and
the difficulty, once that it has got 'well hold,' of rooting it out.
It permeates every class of society in the district connected with the
industry, and managers, amalgamators, assayers, accountants, aye, even
bank officials, are 'all on the job' to 'get a bit' while there is an
opportunity. To exterminate the hateful monster requires on the part
of the mine proprietors combined, stern and drastic measures undertaken
under the personal supervision of one or more of their directors, and
in many instances necessitating the removal of the whole of the official
staff."

The writer narrates how about twenty years ago he was led to suspect
that in an Australian mine running forty head of stamps, in which he
held a controlling interest, the owners were being defrauded of about a
fourth of the gold really contained in the ore, and the successful steps
taken to check the robbery.

"We first of all dispensed with the services of the general manager, and
then issued the following instructions to the mine and mill managers,
I remaining at the mine to see them carried out until I substituted a
practical local man as agent, who afterwards carried on the work most
efficiently:--

"(a) Both of these officials to keep separate books and accounts; in
other words, to be distinct departments.

"(b) The ore formerly was all thrown together and put through the mill.
I subdivided it into four classes, A, B, C, and D, representing deep
levels north and upper levels north, deep levels south and upper levels
south, and allotted to each class ten heads of stamps at the mill.

"(c) The mine manager to try three prospects, forenoon and afternoon
of each day, from the dumps of each of the four classes and record in a
book to be kept for that purpose the estimated mill yield of each one.

"(d) The mill manager was required to do the same at the mill and keep
his record.

"(e) There were four underground bosses in each shift, twelve in all.
I had a book fixed at the top of the shaft in which I required each of
these men, at the expiry of every shift, to record any change in the
faces of the quartz and particularly in regard to quality.

"(f) Having divided the ore into four classes I instructed the
amalgamators, of which there were two in each shift, six in all, that I
required the amalgam from each to be kept separate, with the object of
ascertaining what each part of the mine produced.

"(g) I procured padlocks for the covering boards of the mercury tables
and gave the keys to the amalgamators with instructions that they were
not to hand them over to any one except the exchange shift without my
written authority, and instructed them that they should clean down the
plates every three hours, and after cleaning down the amalgam, buckets
to be placed in the cleaning room, which I instructed to be kept locked
and the key in charge of the watchman night and day.

"(h) The whole of the amalgam taken from the plates during each
twenty-four hours to be cleaned and squeezed by the two amalgamators on
duty every forenoon at nine o'clock in the presence of the mill manager,
who should weigh each lot and enter it in a book to be kept for the
purpose, and the entry to be signed by the mill manager and both
amalgamators as witnesses.

"(i) Every alternate Friday the mortars (boxes) to be cleaned out; the
work to be commenced punctually at eight A.M. by the six amalgamators in
the presence of the mill manager, assisted by the three amalgam cleaning
room watchmen and the four battery feeders on duty, prohibiting any of
them from leaving until the cleaning up was finished, and the amalgam
cleaned, squeezed and weighed, and the amount entered by the mill
manager in the record look and attested by the amalgamators.

"I think the intelligent readers (particularly those with a knowledge
of the business) will see the drift of the above regulations, viz., for
there to be any peculation the whole of the battery staff--fourteen in
all--would have to participate in it, and the number was too many to
keep a secret. Formerly the amalgam cleaning room was sacred to the mill
manager, and on announcing to that official the new instructions he at
once tendered his resignation in a tone of offended dignity, immediately
followed by that of the mine manager. It is a significant fact that
shortly afterwards these two officials purchased a large mill and other
property at a cost of ten thousand pounds, and that the mine yielded
for the following three years during which I was connected with it an
average of over 17 dwt. to the ton, as against formerly 10 to 12 dwt.

"The reader must draw his own conclusions. I used to make it a practice
to visit the mine daily and prospect the ore, and having the mine and
mill managers' daily prospecting as a guide as well as my own, every
man at the mill knew it was impossible for them to thieve without my
detecting it; moreover, I made it a rule to discharge any of the mill
employees that I discovered were interested in any small private claims.

"The crux of the whole thing is having a practical miner at the head of
affairs, and it is impossible for him to thieve if the work is carried
out in the manner I have described."

To bring the whole matter to a conclusion. It may be taken as a safe
axiom that to make gold mining in the mine as distinct from mining on
the Stock Exchange really profitable the same system of economy, of
practical supervision, and scientific knowledge which is now adopted in
all other businesses must be applied to the raising and extraction of
the metal. Then, and not till then, will genuine mining take the place
to which it is entitled amongst our industries.



CHAPTER XI

RULES OF THUMB

This chapter has been headed as above because a number of the rules
and recipes given are simply practical expedients, not too closely
scientific. My endeavour has been to supply practical and useful
information in language as free from technicalities as possible, so as
to adapt it to the ordinary miner, mill operator and prospector, many
of whom have had no scientific training. Some of the expedients are
original devices educed by what we are told is the mother of inventions;
others are hints given by practical old prospectors who had met with
difficulties which would be the despair of a man brought up within reach
of forge, foundry, machine shop, or tradesmen generally. There are many
highly ingenious and useful contrivances besides these I have given.

LIVING PLACES

The health of the prospector, especially in a new country, depends
largely on his housing--in which particular many men are foolishly
careless, for although they are aware that they will be camped out for
long periods, yet all the shelter they rely on is a miserable calico
tent, often without a "fly," while in some cases they sometimes even
sleep on the wet, or dusty, ground. Such persons fully deserve the ill
health which sooner or later overtakes them. A little forethought and
very moderate ingenuity would render their camp comparatively healthy
and comfortable.

In summer the tent is the hottest, and in winter the coldest of
domiciles. The "pizie" or "adobie" hut, or, where practicable, the
"dugout," are much to be preferred, especially the latter. "Pizie" or
"adobie" is simply surface soil kneaded with water and either moulded
between boards like concrete, to construct the walls, or made into large
sun-dried bricks. Salt water should not be used, as it causes the wall
to be affected by every change of weather. A properly constructed house
of this material, where the walls are protected by overhanging eaves,
are practically everlasting, and the former have been standing for
centuries. There are buildings of pizie or adobie in Mexico, California
and Australia which are as good as new, although the latter were built
nearly a century ago.

Adobie dwellings are warm in winter and cool in summer, and can be kept
clean and healthy by occasional coatings of lime whitewash.

The dugout is even more simple in construction. A cutting, say ten feet
wide, is put into the base of a hill for say twelve feet until the back
wall is, say, ten feet high, the sides starting from nothing to that
height. The front and such portion as is required of the side walls are
next constructed of pizie or rough stone, with mud mortar, and the roof
either gabled or skillion of bough, grass, or reed thatch, and covered
with pizie, over which is sometimes put another thin layer of thatch to
prevent the pizie being washed away by heavy rain. Nothing can be more
snug and comfortable than such a house, unless the cows, as Mark Twain
narrates, make things "monotonous" by persistently tumbling down the
chimney.

When the Burra copper mines were in full work in Australia, the banks of
the Burra Creek were honeycombed like a rabbit warren with the "dugout
homes" of the Cornish miners. The ruins of these old dugouts now extend
for miles, and look something like an uncovered Pompeii.

When water is scarce and the tent has to be retained, much can be done
to make the camp snug. I occupied a very comfortable camp once, of which
my then partner, a Dane, was the architect. We called it "The Bungalow,"
and it was constructed as follows: First we set up our tent, 10 ft. by
8 ft., formed of calico, but lined with green baize, and covered with a
well set fly.

Next we put in four substantial forked posts about 10 ft. high and 15
ft. apart, with securely fixed cross pieces, and on the top was laid a
rough flat roof of brush thatch; the sides were then treated in the same
way, but not so thickly, being merely intended as a breakwind.

The tent with its two comfortable bunks was placed a little to one side,
the remaining space being used as a dining and sitting room all through
the summer. Except in occasional seasons of heavy rain, when we were
saved the trouble of washing our dishes, the tent was only used for
sleeping purposes, and as a storehouse for clothes and perishable
provisions. I have "dwelt in marble halls" since then, but never was
food sweeter or sleep sounder than in the old bush bungalow.

A BUSH BED

To make a comfortable bush bedplace, take four forked posts about 3 ft.
6 in. long and 2 to 3 in. in diameter at the top; mark out your bedplace
accurately and put a post at each corner, about 1 ft. in the ground.
Take two poles about 7 ft. long, and having procured two strong
five-bushel corn sacks, cut holes in the bottom corners, put the poles
through, bringing the mouths of the sacks together, and secure them
there with a strong stitch or two. Put your poles on the upright forked
sticks, and you have a couch that even Sancho Panza would have envied.
It is as well to fix stretchers or cross stays between the posts at head
and foot.

In malarial countries, sleeping on the ground is distinctly dangerous,
and as such districts are usually thickly timbered, the Northern
Territory hammock is an admirable device, more particularly where
mosquitoes abound.

NORTHERN TERRITORY HAMMOCK

This hammock, which is almost a standing bedplace when rigged, is
constructed as follows:--To a piece of strong canvas 7 feet long and 2
1/2 feet wide, put a broad hem, say 3 1/2 inches wide at each end. Into
this hem run a rough stick, about 2 feet 8 inches by 2 inches diameter.
Round the centre of the stick pass a piece of strong three-quarter inch
rope, 8 to 10 feet long and knot it, so as to leave a short end in
which a metal eye is inserted. To each end of the two sticks a piece of
quarter-inch lashing, about 6 feet long, is securely attached.

To make the mosquito covering take 18 feet of ordinary strong cheese
cloth, and two pieces of strong calico of the same size as the canvas
bed; put hems in the ends of the upper one large enough to take
half-inch sticks, to all four extremities of which 8 feet of whipcord is
to be attached. The calico forms the top and bottom of what we used to
call the "meat safe," the sides being of cheese cloth. A small, flapped
opening is left on the lower side. When once inside you are quite safe
from mosquito bites.

To rig the above, two trees are chosen 7 to 8 feet apart, or two stayed
poles can be erected if no trees are available. The bed is rigged about
3 feet from the ground by taking the rope round the trees or poles, and
pulling the canvas taut by means of the metal eyelet. Then the lashings
at the extremities of the sticks are fixed about 3 feet further up the
trees and you have a bed something between a hammock and a standing bed.
The mosquito net is fixed above the hammock in a similar manner, except
that it does not require the centre stay.

An old friend of mine once had a rather startling experience which
caused him to swear by the Northern Territory hammock. He was camped
near the banks of a muddy creek on the Daly River, and had fortunately
hung his "meat safe" about four feet high. The night was very dark, and
some hours after retiring he heard a crash among his tin camp utensils,
and the noise of some animal moving below him. Thinking his visitor was
a stray "dingo," or wild dog, he gave a yell to frighten the brute away,
and hearing it go, he calmly went to sleep again. Had he known who his
caller really was, he would not have felt so comfortable. In the
morning on the damp ground below, he found the tracks of a fourteen foot
alligator, which was also out prospecting, but which, fortunately, had
not thought of investigating the "meat safe."

PURIFYING WATER

There is not a more fertile disease distributor, particularly in a new
country, than water. The uninitiated generally take it for granted that
so long as water looks clear it is necessarily pure and wholesome; as
a matter of fact the contrary is more usually the case, except in very
well watered countries, and such, as a rule, are not those in which gold
is most plentifully got by the average prospector. I have seen foolish
fellows, who were parched with a long tramp, drink water in quantity in
which living organisms could be seen with the naked eye, without taking
even the ordinary precaution of straining it through a piece of linen.
If they contracted hydatids, typhoid fever, or other ailments, which
thin our mining camps of the strong, lusty, careless youths, who could
wonder?

The best of all means of purifying water from organic substances is to
boil it. If it be very bad, add carbon in the form of the charcoal from
your camp fire. If it be thick, you may, with advantage, add a little of
the ash also.

I once rode forty-five miles with nearly beaten horses to a native
well, or rock hole, to find water, the next stage being over fifty miles
further. The well was found, but the water in it was very bad; for in
it was the body of a dead kangaroo which had apparently been there for
weeks. The wretched horses, half frantic with thirst, did manage to
drink a few mouthfuls, but we could not. I filled our largest billycan,
holding about a gallon, slung it over the fire and added, as the wood
burnt down, charcoal, till the top was covered to a depth of two
inches. With the charcoal there was, of course, a little ash containing
bi-carbonate of potassium. The effect was marvellous. So soon as the
horrible soup came to the boil, the impurities coagulated, and after
keeping it at boiling temperature for about half an hour, it was removed
from the fire, the cinders skimmed out, and the water allowed to settle,
which it did very quickly. It was then decanted off into an ordinary
prospector's pan, and some used to make tea (the flavour of which can be
better imagined than described); the remainder was allowed to stand
all night, a few pieces of charcoal being added. In the morning it was
bright, clear, and absolutely sweet. This experience is worth knowing
as many a bad attack of typhoid and other fevers would be averted if
practical precautions of this kind were only used.

TO OBTAIN WATER FROM ROOTS

The greatest necessity of animal life is water. There are, however,
vast areas of the earth's surface where this most precious element is
lamentably lacking, and such, unfortunately, is the case in many rich
auriferous districts.

To the practical man there are many indications of water. These, of
course, vary in different countries. Sometimes it is the herbage, but
probably, the best of all is the presence of carnivorous animals and
birds. These are never found far from water. In Australia the not
over-loved wily old crow is a pretty sure indicator of water within
reasonable distance--water may be extracted from the roots of the Mallee
(_Eucalyptus dumosa_ and _gracilis_)--the Box (_Eucalyptus hemiphloia_)
and the Water Bush (_Hakea leucoptera_). To extract it the roots are dug
up, cut into lengths of about a foot, and placed upright in a can; the
lower ends being a few inches above the bottom. It is simply astonishing
how much wholesome, if at times somewhat astringent, water may thus be
obtained in a few hours, particularly at night.

_Hakea leucoptera_. "Pins and needles."--Maiden, in his work "Useful
Native Plants of Australia," says: "In an experiment on a water-yielding
_Hakea_, the first root, about half an inch in diameter and six or eight
feet long, yielded quickly, and in large drops about a wine-glass full
of really excellent water."

This valuable, though not particularly ornamental shrub (for it never
attains to the dimensions of a tree), is found, to the best of my
belief, in all parts of Australia, although it is said to be absent from
West Australia. As to this I don't feel quite sure. I have seen it "from
the centre of the sea" as far west as Streaky Bay, and believe I have
seen it further West still. Considering the great similarity of much of
the flora of South Africa to that of Australia, it is probable that
some species of the water-bearing _Hakea_ might be found there. It can
readily be recognised by its acicular, needle-like leaves, and more
particularly by its peculiarly shaped seed vessel, which resembles the
pattern on an old-fashioned Indian shawl.

If the water found is too impure for drinking purposes and the
trouble arises from visible animalculae only, straining through a
pocket-handkerchief is better than nothing; the carbon filter is better
still; but nothing is so effective as boiling. A carbon filter is a tube
with a wad of compressed carbon inserted, through which the water is
sucked, but as a rule clay-coloured water is comparatively innocuous,
but beware of the bright, limpid water of long stagnant rock
water-holes.

TO MAKE AN EFFECTIVE FILTER

Take a nail-can, keg, cask, or any other vessel, or even an ordinary
wooden case (well tarred inside, if possible, to make it water-tight).
Make a hole or several holes in the bottom, and set it over a tank or
bucket. Into the bottom of the filter put (1) a few inches of washed
broken stone; (2) about four inches of charcoal; (3) say three inches
of clean coarse sand (if not to hand you can manufacture it by crushing
quartz with your pestle and mortar), and (4) alternate layers of
charcoal and sand until the vessel is half filled. Fill the top half
with water, and renew from time to time, and you have a filter which is
as effective as the best London made article. _But it is better to boil
your water whether you filter afterwards or not._

Clear the inside of the water-cask frequently, and occasionally add
to the water a little Condy's fluid, as it destroys organic matter. A
useful cement for stopping leaky places in casks is made as follows:
Tallow 25 parts, lard 40 parts, sifted wood ash 25 parts. Mix together
by heating, and apply with a knife blade which has just been heated.

CANVAS WATER BAGS

Are easily made, and are very handy for carrying small supplies
of drinking-water when prospecting in a dry country; they have the
advantage of keeping the water cool in the hottest weather, by reason on
the evaporation. The mouthpiece is made of the neck of a bottle securely
sewn in.

MEDICINE CASE

Medicine is also a matter well worthy of thought. The author's worst
enemy would not call him a mollycoddle, yet he has never travelled in
far wilds without carrying something in the way of medicine. First,
then, on this subject, it cannot be too often reiterated that if common
Epsom salts were a guinea an ounce instead of a penny the medicine
would be valued accordingly, but it is somewhat bulky. What I especially
recommend, however, is a small pocket-case of the more commonly known
homeopathic remedies, "Mother tinctures," which are small, light, and
portable, with a small simple book of instructions. Though generally
an allopath in practice, I once saved my own life, and have certainly
helped others by a little knowledge in diagnosing complaints and having
simple homeopathic remedies at hand to be used in the first stages of
what might otherwise have been serious illnesses.

PRODUCING FIRE

Every one has heard, and most believe, that fire may be easily produced
by rubbing together two pieces of wood. I have seen it done by natives,
but they seldom make use of the operation, which is generally laborious,
preferring to carry lighted fire sticks for miles. I have never
succeeded in the experiment.

Sometimes, however, it is almost a matter of life or death to be able to
produce fire. The back of a pocket knife, or an old file with a fragment
of flint, quartz, or pyrites struck smartly together over the remains of
a burnt piece of calico, will in deft hands produce a spark which can be
fanned to a glow, and so ignite other material, till a fire is produced.

Also it may not be generally known that he who carries a watch carries
a "burning glass" with which he can, in clear weather, produce fire
at will. All that is required is to remove the glass of your watch and
carefully three parts fill it with water (salt or fresh). This forms
a lens which, held steadily, will easily ignite any light, dry,
inflammable substance.

When firearms are carried, cut a cartridge so that only about a quarter
of the charge of powder remains. Damp some powder and rub it on a small
piece of dry cotton cloth or well-rubbed brown paper. Push a loose
pellet of this into the barrel, insert your half cartridge, fire at the
ground, when the wad will readily ignite, and can be blown into flame.

TO COPY CORRESPONDENCE

The prospector is not usually a business man; hence in dealing with
business men who, like Hamlet, are "indifferent honest," he frequently
comes to grief through not having a copy of his correspondence. It is
most desirable, therefore, either to carry a carbon paper duplicating
book and a stylus, or by adding a little sugar to good ordinary black
ink you may make a copying ink; then with the aid of a "yellow back"
octavo novel, two pieces of board, and some ordinary tissue paper, you
may take a copy of any letter you send.

TO PROVIDE A SIMPLE TELEGRAPHIC CODE

Buy a couple of cheap small dictionaries of the same edition, send one
to your correspondent with an intimation that he is to read up or down
so many words from the one indicated when receiving a message. Thus,
if I want to say "Claim is looking well," I take a shilling dictionary,
send a copy to my correspondent with the intimation that the real word
is seven down, and telegraph--"Civilian looking weird;" this, if looked
up in Worcester's little pocket dictionary, for instance, will read
"Claim looking well." Any dictionary will do, so long as both parties
have a copy and understand which is the right word. By arrangement this
plan can be varied from time to time if you have any idea that your code
can be read by others.

A SERVICEABLE SOAP

Wood ashes from the camp fire are boiled from day to day in a small
quantity of water, and allowed to settle, the clear liquid being
decanted off. When the required quantity of weak lye has been
accumulated, evaporate by boiling, till a sufficient degree of strength
has been obtained. Now melt down some mutton fat, and, while hot, add to
the boiling lye. Continue boiling and stirring till the mixture is about
the consistency of thick porridge, pour into any convenient flat vessel,
and let it stand till cool. If you have any resin in store, a little
powdered and added gradually to the melting tallow, before mixing with
the lye, will stiffen your soap.

TO CROSS A FLOODED STREAM

Take a half-gallon, or larger, tin "billy can," enclose it in a strong
cotton handkerchief or cotton cloth, knotting same over the lid, invert,
and, taking the knot in the hand, you have a floating appliance which
will sustain you in any water, whether you are a swimmer or not. The
high silk hat of civilisation would act as well as the can, but these
are not usually found far afield.

TO MAKE A HIDE BUCKET

At times when prospecting in an "incline" or "underlay" shaft,
particularly where the walls of the lode are irregular, a hide bucket
will be found preferable to an iron one. The mode of manufacture is as
follows: Procure an ox hide, "green," if possible; if dry, it should
be soaked until quite soft. Cut some thin strips of hide for sewing or
lacing. Now shape a bag or pocket of size sufficient to hold about
a hundredweight of stone, and by puncturing the edges with a knife,
marline-spike, or other pointed tool, sew together; make a handle of
twisted or pleated hide, and having filled your bucket with dry sand or
earth let it stand till the whole is quite dry, when it will be properly
distended and will maintain its shape until worn out.

TO MAKE A "SLUSH LAMP"

Where candles are scarce and kerosine is not, a "slush lamp" is a useful
substitute. Take an old but sound quart tin pannikin, half fill it with
sand or earth, and prepare a thin stick of pine, round which wrap a
strip of soft cotton cloth. The stick should be about half an inch
longer than the depth of the pannikin. Melt some waste fat, fill the
pannikin therewith, push the stick down into the earth at the
bottom, and you have a light, which, if not equal to the electric or
incandescent gas burner, is quite serviceable. In Australia the soft
velvety core of the "bottle brush," _Banksia marginata_, is often used
instead of the cotton wick.



CHAPTER XII

RULES OF THUMB

MINING APPLIANCES AND METHODS

A TEMPORARY FORGE

What prospector has not at times been troubled for the want of a forge?
To steel or harden a pick or sharpen a drill is comparatively easy,
but there is often a difficulty in getting a forge. Big single action
bellows are sometimes bought at great expense, and some ingenious
fellows have made an imitation of the blacksmith's bellows by means of
sheepskins and rough boards.

With inadequate material and appliances to hand, the following will
be found easier to construct and more lasting when constructed. Only
a single piece of iron is required, and, at a pinch, one could even
dispense with that by using a slab of talcose material, roughly shaping
a hearth therein and making a hole for the blast. First, construct a
framing about the height of an ordinary smith's forge. This can made
with saplings and bark, or better still, if available, out of an empty
packing case about three feet square. Fill the frame or case with
slightly damped earth and ram it tight, leaving the usual hollow hearth.
Then form a chamber below the perforated hearth opening to the rear.
Now construct a centrifugal fan, such as is used for the ventilation of
shallow shafts and workings. Set this up behind the hearth and revolve
by means of a wooden multiplying wheel. A piece of ordinary washing line
rope, or sash line rope, well resined if resin can be got--but pitch,
tar, or wax will do by adding a little fine dust to prevent sticking--is
used as a belt. With very rough materials a handy man can thus make a
forge that will answer ordinary requirements.--N.B. Do not use clay for
your hearth bed unless you can get a highly aluminous clay, and can give
it full time to dry before the forge fire is lit. Ordinary surface soil,
not too sandy, acts well, if damped and rammed thoroughly. Of course,
if you can get an iron nozzle for your blower the whole operation is
simplified.

SIMPLE WAY OF MAKING CHARCOAL

Dig a pit 5 feet square by 3 feet deep and fill with fuel. After
lighting, see that the pit is kept full. The hot embers will gradually
sink to the bottom. The fuel should be kept burning fiercely until the
pit seems almost full, when more fuel should be added, raising the heap
about a foot above the level of the ground. The earth dug out of the pit
should then be shovelled back over the burning mass. After leaving it to
cool for 24 hours the pit will be found nearly full of charcoal. About
one-quarter the weight of the dry fuel used should be recovered in
charcoal.

ROUGH SMELTING ON THE MINE

Rough smelting on the mine is effected with a flux of borax, carbonate
of soda, or, as I have often done, with some powdered white glass. When
the gold is smelted and the flux has settled down quietly in a liquid
state, the bulk of the latter may be removed, to facilitate pouring into
the mould, by dipping an iron rod alternately into the flux and then
into a little water, and knocking off the ball of congealed flux which
adheres after each dip. This flux should, however, be crushed with a
pestle and mortar and panned off, as, in certain cases, it may contain
tiny globules of gold.

MISFIRES IN BLASTING

One of the most common sources of accident in mining operations is due
either to carelessness or to the use of defective material in blasting.
A shot misses, generally for one of two reasons; either the explosive,
the cap, or the fuse (most often the latter), is inferior or defective;
or the charging is incompletely performed. Sometimes the fuse is not
placed properly in the detonator, or the detonator is not properly
enclosed in the cartridge, or the fuse is injured by improper tamping.
If several shots have been fired together, particularly at the change
of a "shift," the men who have to remove the broken material may in so
doing explode the missed charge. Or, more inexcusable still, men will
often be so foolish as to try to clear out the drill hole and remove
the missed cartridge. When a charge is known to have missed all that
is necessary to do in order to discharge it safely is to remove a few
inches of "tamping" from the top of the drill hole, place in the bore
a plug of dynamite with cap and fuse attached, put an inch or two of
tamping over it and fire, when the missed charge will also be exploded.
Of course, judgment must be used and the depth of the drill taken into
consideration. As a rule, miners use far more tamping than is at all
requisite. The action of the charge will generally be found quite as
effective with a few inches of covering matter as with a foot or more,
while the exploding of misfire cartridges is rendered simple, as no
removal of tamping is required before placing the top "plug" in case of
misfire.

TO PREVENT LOSS OF RICH SPECIMENS IN BLASTING

When blasting the cap of a lode, particularly on rich shutes of gold,
the rock is apt to fly, and rich specimens may be thrown far afield and
so be lost. A simple way of avoiding this is to procure a quantity
of boughs, which tie into loose bundles, placing the leafy parts
alternately end for end. Before firing, pile these bundles over the
blast and, if care is used, very few stones will fly. The same device
may be used in wide shallow shafts.

A SIMPLE MODE OF RETORTING SMALL QUANTITIES OF AMALGAM

Clean your amalgam and squeeze it as hard as possible through strong
calico or chamois leather. Take a large sound potato, cut off about a
quarter from one end and scoop out a hole in the centre about twice as
big as the ball of amalgam. Procure a piece of flat iron--an old spade
will do as well as anything--insert the amalgam, and, having placed the
potato, cut side downwards, thereon, put the plate of iron on the forge,
heat up first gently, then stronger, till separation has taken place,
when the gold will be found in a bright clean button on the plate
and the mercury in fine globules in the potato, from which it can be
re-collected by breaking up the partly or wholly cooked tuber under
water in an enamelled or ordinary crockery basin.

TO RETORT SMALL QUANTITIES OF MERCURY FOR AMALGAMATING ASSAY TESTS

Get two new tobacco pipes similar in shape, with the biggest bowls and
longest stems procurable. Break off the stem of one close to the bowl
and fill the hole with well worked clay (some battery slimes make the
best luting clay). Set the stemless pipe on end in a clay bed, and fill
with amalgam, pass a bit of thin iron or copper wire beneath it,
and bend the ends of the wire upwards. Now fit the whole pipe, bowl
inverted, on to the under one, luting the edges of both well with clay.
Twist the wire over the top with a pair of nippers till the two bowls
are fitted closely together, and you have a retort that will stand any
heat necessary to thoroughly distil mercury.

A SIMPLE MODE OF ASCERTAINING THE NOMINAL HORSE-POWER OF AN ENGINE

Multiply the internal diameter of the cylinder by itself and strike off
the last figure of the quotient. The diameter is

     20" X 20"
     20
     ____
     400. The H.P. is 40.

The following rules will be found more professionally accurate from
an engineering standpoint, though the term "horse-power" is not now
generally employed.

_To find the Nominal Horse-power_.--For _non-condensing_ engines:
Multiply the square of the diameter of the cylinder in inches by 7 and
divide the product by 80. For _condensing_ engines: Multiply the square
of the diameter of the cylinder in inches by 7 and divide the product by
200.

_To find the Actual Horse-power_ of an engine, multiply the area of the
cylinder in square inches by the average effective pressure in pounds
per square inch, less 3 lb. per square inch as the frictional allowance,
and also by the speed of the piston in feet per minute, dividing the
product by 33,000, and the quotient will be the actual horse-power.

"SCALING" COPPER PLATES

To "scale" copper plates they may be put over a charcoal or coke fire
to slowly sublimate the quicksilver. Where possible, the fireplace of
a spare boiler can be utilised, using a thin red fire. After the entire
evaporation of the quicksilver the plates should be slowly cooled,
rubbed with hydrochloric acid, and put in a damp place overnight, then
rubbed with a solution of sal ammoniac and nitre in equal parts, and
again heated slowly over a red fire. They must not be allowed to get red
hot; the proper degree of heat is indicated by the gold scale rising
in blisters, when the plates should be taken from the fire and the gold
scraped off. Any part of the plate on which the gold has not blistered
should be again rubbed with the solution and fired. The gold scale
should be collected in a glass or earthen dish and covered with nitric
acid, till all the copper is dissolved, when the gold can be smelted in
the usual way; but after it is melted corrosive sublimate should be put
in the crucible till a blue flame ceases to be given off.

_A Second Method_

The simplest plan I know is to have a hole dug nine inches deep by about
the size of the plate to be scaled; place a brick at each corner, and
on each side, halfway between, get up a good fire; let it burn down to
strong embers, or use charcoal, then place the plate on three bars of
iron extending between the three pairs of bricks, have a strong solution
of borax ready in which soak strips of old "table blanket," laying these
over the plate and sprinkling them with the borax solution when the
plate gets too hot. After a time the deposit of mercury and gold on
the plate will assume a white, efflorescent appearance, and may then be
readily parted from the copper.

_Another Method_

Heat the plate over an open fire, to drive off the mercury; after which,
let it cool, and saturate with dilute sulphuric acid for three hours,
or longer; then sprinkle over the surface a mixture of equal parts of
common salt and sal ammoniac, and heat to redness; then cool, and the
gold scale comes off freely; the scale is then boiled in nitric or
sulphuric acid, to remove the copper, previous to melting. Plates may be
scaled about once in six months, and will under ordinary circumstances
produce about one ounce of clean gold for each superficial foot of
copper surface employed. I always paint the back of the plate with
a mixture of boiled oil and turpentine, or beeswax dissolved in
turpentine, to prevent the acid attacking the copper.

HOW TO SUPPLY MERCURY TO MORTAR BOXES

I am indebted for the following to Mr. J. M. Drake, who, speaking of his
experience on the Wentworth Mine, N.S.W., says:

"Fully 90 per cent of the gold is saved on the outside plates, only a
small quantity remaining in the mortar. The plates have a slope of 2
in. to 1 ft. No wells are used, the amalgam traps saving any quicksilver
which may leach off the plates. The quicksilver is added every hour
in the mortar. The quantity is regulated by the mill manager in the
following manner: Three pieces of wood, 8 in. wide by 12 in. long by 2
in. thick, have 32 holes 1 in. deep bored in each of them. These holes
will just take a small 2 oz. phial. The mill manager puts the required
quantity of quicksilver in each bottle and the batteryman empties one
bottle in each mortar every hour; and puts it back in the hole upside
down. Each block of wood lasts eight hours, the duration of one man's
shift." This of course is for a 20-head mill with four mortars or
"boxes."

I commend this as an excellent mode of supplying the mercury to the
boxes or mortars. The quantity to be added depends on circumstances. A
careless battery attendant will often put in too much or too little
when working without the automatic feeder. I have known an attendant
on suddenly awaking to the fact half through his shift, that he had
forgotten to put in any mercury, to then empty into the stamper box two
or three pounds weight; with what effect may be easily surmised.

HOW WATER SHOULD ENTER STAMPER BOXES

The following extract which relates to Californian Gold Mill practices
is from Bulletin No. 6 of the California State Mining Bureau. I quite
agree with the practice.

"The battery water should enter both sides of the mortar in an even
quantity, and should be sufficient to keep a fairly thick pulp which
will discharge freely through the grating or screen. About 120 cubic
feet of water per ton of crushed ore may be considered an average, or 8
to 10 cubic feet per stamp per hour.

"Screens of different materials and with different orifices are used;
the materials comprise wire cloth of brass or steel, tough Russian sheet
iron, English tinned plate, and, quite recently, aluminium bronze. The
'aluminium bronze' plates are much longer lived than either of the other
kinds, and have the further advantage that, when worn out, they can be
sold for the value of the metal for remelting; these plates are bought
and sold by the pound, and are said to contain 95 per cent of copper and
5 per cent of aluminium. Steel screens are not so much used, on account
of their liability to rust."

I have had no experience with the aluminium bronze screen. I presume,
however, that it is used only for mills where mercury is not put in the
mortars, otherwise, it would surely become amalgamated. The same remark
applies to brass wire cloth and tinned plate. Unless the metal of which
they are composed will not readily amalgamate with mercury, I should be
chary of using new screen devices. Mercury is a most insidious metal
and is often found most unexpectedly in places in the battery where
it should not be. Probably aluminium steel would be better than any
substance mentioned. It would be hard, light, strong, and not readily
corrodible. I am not aware if it has been tried.

Under the heading of "Power for Mills" the following is taken from the
same source.

POWER FOR MILLS

"As the Pelton wheel seems to find the most frequent application in
California, it may be convenient for millmen to have the following rule,
applicable to these wheels:

"When the head of water is known in feet, multiply it by 0.0024147,
and the product is the horse-power obtainable from one miner's inch of
water.

"The power necessary for different mill parts is:

     For each 850lb. stamp, dropping 6 in. 95 times per minute,
          1.33 h.-p.
     For each 750lb. stamp, dropping 6 in. 95 times per minute,
          1.18 h.-p.
     For each 650lb. stamp, dropping 6 in. 95 times per minute,
          1.00 h.-p.
     For an 8-inch by 10-inch Blake pattern rock-breaker
          9.00 h.-p.
     For a Frue or Triumph vanner, with 220 revolutions per min.
          0.50 h.-p.
     For a 4-feet clean-up pan, making 30 revolutions per min.
          1.50 h.-p.
     For an amalgamating barrel, making 30 revolutions per min.
          2.50 h.-p.
     For a mechanical batea, making 30 revolutions per min.
          1.00 h.-p."

The writer has had small practical experience of the working of that
excellent hydraulic motor, the Pelton wheel, but if by horse-power in
the table given is meant nominal horse-power, it appears to be high.
Working with 800 cwt. stamps, 80 blows a minute, one horse-power nominal
will be found sufficient with any good modern engine, which has no
further burden than raising the stamps and pumping the feed water. It is
always well, however, particularly when providing engine power, to err
on the right side, and make provision for more than is absolutely needed
for actual battery requirements. This rule applies with equal potency to
pumping engines.

TO AVOID LOSS IN CLEANING UP

The following is a hint to quartz mill managers with respect to that
common source of loss of gold involved in the almost inevitable loss
of mercury in cleaning up operations. I have known hundreds of pounds'
worth of gold to be recovered from an old quartz mill site by the simple
process of washing up the ground under the floor.

If you cannot afford to floor the whole of the battery with smooth
concrete, at all events smoothly concrete the floor of the cleaning-up
room, and let the floor slope towards the centre: where a sink is
provided. Any lost mercury must thus find its way to the centre, where
it will collect and can be panned off from time to time. Of course an
underground drain and mercury trap must be provided.

IRON EXTRACTOR

When using self-feeders, fragments of steel tools are especially liable
to get into the battery boxes or other crushing appliance where they
sometimes cause great mischief. I believe the following plan would be a
practicable remedy for this evil.

By a belt from the cam or counter shaft, cause a powerful electric
magnet to extract all magnetic particles; then, by a simple ratchet
movement, at intervals withdraw the magnet and drop the adhering
fragments into a receptacle by automatically switching off the electric
current. A powerful ordinary horseshoe magnet might probably do just as
well, but would require to be re-magnetised from time to time.

TO SILVER COPPER PLATES

To silver copper plates, that is, to amalgamate them on the face with
mercury, is really a most simple operation, though many batterymen make
a great mystery of it. Indeed, when I first went into a quartz mill the
process deemed necessary was not only a very tedious one, but very dirty
also.

To amalgamate with silver, in fact, to silver-plate your copper without
resort to the electro-plating bath, take any old silver (failing that,
silver coin will do, but is more expensive), and dissolve it in somewhat
dilute nitric acid, using only just sufficient acid as will assist the
process. After some hours place the ball of amalgam in a piece of strong
new calico and squeeze out any surplus mercury.

About an ounce of silver to the foot of copper is sufficient. To apply
it on new plates use nitric acid applied with a swab to free the surface
of the copper from oxides or impurities, then rub the ball of amalgam
over the surface using some little force. It is always well when coating
copper plates with silver or zinc by means of mercury to let them stand
dry for a day or two before using, as the mercury oxidises and the
coating metal more closely adheres.

Only the very best copper plate procurable should be used for battery
tables; bad copper will always give trouble, both in the first "curing,"
and after treatment. It should not be heavily rolled copper, as the
more porous the metal the more easily will the mercury penetrate and
amalgamate. I cannot agree that any good is attained by scouring the
plates with sand and alkalies, as recommended in some books on the
subject; on the contrary, I prefer the opposite mode of treatment, and
either face the plates with nitrate of silver and nitrate of mercury,
or else with sulphate of zinc and mercury, in the form of what is
called zinc amalgam. If mine water, which often contains a little free
sulphuric acid, is being used, the latter plan is preferable.

The copper should be placed smoothly on the wooden table and secured
firmly thereto by copper tacks. If the plate should be bent or buckled,
it may be flattened by beating it with a heavy hammer, taking care to
interpose a piece of inch-thick soft wood between hammer and plate.

To coat with mercury only, procure some nitrate of mercury. This is
easily made by placing mercury in an earthenware bowl, pouring somewhat
dilute nitric acid on it, and letting it stand till the metallic mercury
is changed to a white crystal. Dense reddish-brown fumes will arise,
which are injurious if breathed, so the operation should be conducted
either in the open air, or where there is a draught.

Having your silvering solution ready, which is to be somewhat diluted
with water, next take two swabs, with handles about 12 inches long, dip
the first into a basin containing dilute nitric acid, and rub it rapidly
over about a foot of the surface of the plate; the oxide of copper will
be absolutely removed, and the surface of the copper rendered pure and
bright; then take the other swab, wet with the dilute nitric of mercury,
and pass it over the clean surface, rubbing it well in. Continue this
till the whole plate has a coating of mercury. It may be well to go
over it more than once. Now turn on the water and wash the plate clean,
sprinkle with metallic mercury, rubbing it upwards until the plate will
hold no more.

A basin with nitrate of mercury may be kept handy, and the plates
touched up from time to time for a few days until they get amalgamated
with gold, after which, unless you have much base metal to contend with,
they will give no further trouble.

It must be remembered, however, that an excessive use of nitric acid
will result in waste of mercury, which will be carried off in a milky
stream with the water; and also that it will cause the amalgam to become
very hard, and less active in attracting other particles of gold.

If you are treating the plate with nitrate of silver prepared as already
mentioned, clean the plate with dilute nitric acid, rub the surface with
the ball of amalgam, following with the swab and fairly rubbing in. It
will be well to prepare the plate some days before requiring to use
it, as a better adhesion of the silver and copper takes place than if
mercury is applied at once.

To amalgamate with zinc amalgam, clean the copper plate by means of a
swab, with fairly strong sulphuric acid diluted with water; then while
wet apply the zinc-mercury mixture and well rub in. To prepare the
zinc-amalgam, clip some zinc (the lining of packing cases will do)
into small pieces and immerse them in mercury after washing them with
a little weak sulphuric acid and water to remove any coating of oxide.
When the mercury will absorb no more zinc, squeeze through chamois
leather or calico (as for silver amalgam), and well rub in. The plate
thus prepared should stand for a few days, dry, before using. If, before
amalgamation with gold takes place, oxide of copper or other scum should
rise on this plate a little very dilute sulphuric acid will instantly
remove it.

Sodium and cyanide of potassium are frequently used in dressing-plates,
but the former should be very sparingly employed, as it will often
do more harm than good by taking up all sorts of base metals with the
amalgam, and so presenting a surface which the gold will pass over
without adhering to. Where water is scarce, and is consequently used
over and over again, lime may be added to the pulp, or, if lime is not
procurable, wood ashes may be used. The effect is two-fold; the lime
not only tends to "sweeten" sulphide ores and keep the tables clean,
but also causes the water to cleanse itself more quickly of the slimes,
which will be more rapidly precipitated. When zinc amalgam is used,
alkalies would, of course, be detrimental.

When no other water than that from the mine is available, difficulties
often arise owing to the impurities it contains. These are various,
but among the most common are the soluble sulphates, and sometimes free
sulphuric acid evolved by the oxidisation of metallic sulphides. In the
presence of this difficulty, do one of two things; either _utilise_ or
_neutralise_. In certain cases, I recommend the former. Sometime since
I was treating, for gold extraction, material from a mine which was very
complex in character, and for which I coined the term "polysynthetic."
This contained about half a dozen different sulphides. The upper parts
of the lode being partially oxidised, free sulphuric acid (H2SO4) was
evolved. I therefore, following out a former discovery, added a little
metallic zinc to the mercury in the boxes and on the plates with
excellent results. When the free acid in the ore began to give out in
the lower levels I added minute quantities of sulphuric acid to the
water from time to time. I have since found, however, that with some
water, particularly West Australian, the reaction is so feeble (probably
owing to the lime and magnesia present) as to make this mode of
treatment unsuitable.

HOW TO MAKE A DOLLY

I have seen some rather elaborate dollies, intended to be worked with
amalgamating tables, but the usual prototype of the quartz mill is
set up, more or less, as follows: A tree stump, from 9 in. to a foot
diameter, is levelled off smoothly at about 2 ft. from the ground; on
this is firmly fixed a circular plate of 1/2 in. iron, say 9 in. in
diameter; a band of 3/16 in. iron, about 8 or 9 in. in height, fits
more or less closely round the plate. This is the battery box. A beam
of heavy wood, about 3 in. diameter and 6 ft. long, shod with iron,
is vertically suspended, about 9 in. above the stump, from a flexible
sapling with just sufficient spring in it to raise the pestle to the
required height. About 2 ft. from the bottom the hanging beam is pierced
with an augur hole and a rounded piece of wood, 1 1/2 in. by 18 in.,
is driven through to serve as a handle for the man who is to do the
pounding. His mate breaks the stone to about 2 in. gauge and feeds the
box, lifting the ring from time to time to sweep off the triturated
gangue, which he screens through a sieve into a pan and washes off,
either by means of a cradle or simply by panning. In dollying it
generally pays to burn the stone, as so much labour in crushing is thus
saved. A couple of small kilns to hold about a ton each dug out of a
clay bank will be found to save fuel where firewood is scarce, and will
more thoroughly burn the stone and dissipate the base metals, but it
must be remembered that gold from burnt stone is liable to become so
encrusted with the base metal oxides as to be difficult to amalgamate.

ROUGH WINDLASS

Make two St. Andrew's crosses with four saplings, the upper angle being
shorter than the lower; fix these upright, one at each end of the shaft;
stay them together by cross pieces till you have constructed something
like a "horse," such as is used for sawing wood, the crutch being a
little over 3 feet high. Select a leg for a windlass barrel, about 6 in.
diameter and a foot longer than the distance between the supports, as
straight as is procurable; cut in it two circular slots about an inch
deep by 2 in. wide to fit into the forks; at one end cut a straight slot
2 in. deep across the face. Now get a crooked bough, as nearly the shape
of a handle as nature has produced it, and trim it into right angular
shape, fit one end into the barrel, and you have a windlass that will
pull up many a ton of stuff.

PUDDLER

This is made by excavating a circular hole about 2 ft. 9 in. deep and,
say 12 ft. in diameter. An outer and inner wall are then constructed of
slabs 2 ft. 6 in. in height to ground level, the outer wall being thus
30 ft. and the inner 15 ft. in circumference. The circular space between
is floored with smooth hardwood slabs or boards, and the whole made
secure and water-tight. In the middle of the inner enclosure a
stout post is planted, to stand a few inches above the wall, and the
surrounding space is filled up with clay rammed tight. A strong iron pin
is inserted in the centre of the post, on which is fitted a revolving
beam, which hangs across the whole circumference of the machine
and protrudes a couple of feet or so on each side. To this beam are
attached, with short chains, a couple of drags made like V-shaped
harrows by driving a piece of red iron through a heavy frame, shaped as
a rectangular triangle.

To one end of the beam an old horse is attached, who, as he slowly walks
round the circular track, causes the harrows and drags to so puddle
the washdirt and water in the great wooden enclosure that the clay is
gradually disintegrated, and flows off with the water which is from time
to time admitted. The clean gravel is then run through a "cradle," "long
Tom," or "sluice," and the gold saved. This, of course, is the simplest
form of gold mining. In the great alluvial mines other and more
intricate appliances are used but the principle of extraction is the
same.

A MAKESHIFT PUMP

To make a temporary small "draw-lift" pump, which will work down to
a hundred feet or more if required, take a large size common suction
Douglas pump, and, after removing the top and handle, fix the pump as
close to the highest level of the water in the shaft as can be arranged.
Now make a square water-tight wooden column of slightly greater capacity
than the suction pipe, fix this to the top of the pump, and by means
of wooden rods, work the whole from the surface, using either a longer
levered handle or, with a little ingenuity, horse-power. If you can
get it the iron downpipe used to carry the water from the guttering of
houses is more easily adapted for the pipe column; then, also, iron pump
rods can be used but I have raised water between 60 and 70 feet with a
large size Douglas pump provided only with a wooden column and rods.

SQUEEZING AMALGAM

For squeezing amalgam, strong calico, not too coarse, previously soaked
in clean water, is quite as good as ordinary chamois leather. Some gold
is fine enough to escape through either.

MERCURY EXTRACTOR

The mercury extractor or amalgam separator is a machine which is very
simple in construction, and is stated to be most efficient in extracting
quicksilver from amalgam, as it requires but from two to three minutes
to extract the bulk of the mercury from one hundred pounds of amalgam,
leaving the amalgam drier than when strained in the ordinary way by
squeezing through chamois leather or calico. The principle is that
of the De Laval cream separator--i.e., rapid centrifugal motion.
The appliance is easily put together, and as easily taken apart. The
cylinder is made of steel, and is run at a very high rate of speed.

The general construction of the appliance is as follows: The casing or
receiver is a steel cylinder, which has a pivot at the bottom to receive
the step for an upright hollow shaft, to which a second cylinder of
smaller diameter is attached. The second cylinder is perforated, and
a fine wire cloth is inserted. The mercury, after passing through the
cloth, is discharged through the perforations. When the machine
is revolved at great speed, the mercury is forced into the outside
cylinder, leaving the amalgam, which has been first placed in a calico
or canvas bag, in a much drier state than it could be strained by hand.
While not prepared to endorse absolutely all that is claimed for this
appliance, I consider that it has mechanical probability on its side,
and that where large quantities of amalgam have to be treated it will be
found useful and effective.

SLUICE PLATES

I am indebted to Mr. F. W. Drake for the following account of sluice
plates, which I have never tried, but think the device worth attention:

"An addition has been made to the gold-saving appliances by the placing
of what are called in America, 'sluice plates' below the ordinary table.
The pulp now flows over an amalgamating surface, 14 ft. long by 4 ft.
wide, sloping 1 1/2 in. to the foot, and is then contracted into a
copper-plated sluice 15 ft. long by 14 in. wide, having a fall of 1 in.
to the foot. Our mill manager (Mr. G. C. Knapp) advocated these sluice
plates for a long time before I would consent to a trial. I contended
that as we got little or no amalgam from the lower end of our table
plates there was no gold going away capable of being recovered by copper
plates; and even if it were, narrow sluice plates were a step in the
wrong direction. If anything the amalgamating surface should be widened
to give the particles of gold a better chance to settle. His argument
was that the conditions should be changed; by narrowing the stream and
giving it less fall, gold, which was incapable of amalgamation on the
wide plates, would be saved. We finally put one in, and it proved
so successful that we now have one at the end of each table. The
per-centage recovered on the sluice plates, of the total yield, varies,
and has been as follows:--October, 9.1 per cent; November, 6.9 per cent;
December, 6.4 per cent; January, 4.3 per cent; February, 9.3 per cent."

MEASURING INACCESSIBLE DISTANCES

To ascertain the width of a difficult gorge, a deep river, or
treacherous swamp without crossing and measuring, sight a conspicuous
object at the edge of the bank on the farther side; then as nearly
opposite and square as possible plant a stake about five feet high, walk
along the nearer margin to what you guess to be half the distance across
(exactitude in this respect is not material to the result), there plant
another stake, and continuing in a straight line put in a third. The
stakes must be equal distances apart and as nearly as possible at a
right angle to the first line. Now, carrying in hand a fourth stake,
strike a line inland at right angles to the base and as soon as sighting
over the fourth stake, you can get the fourth and second stakes and
the object on the opposite shore in line your problem is complete. The
distance between No. 4 and No. 3 stakes is the same as that between No.
1 and the opposite bank.

TO SET OUT A RIGHT ANGLE WITH A TAPE

Measure 40 ft. on the line to which you wish to run at right angles, and
put pegs at A and B; then, with the end of the tape held carefully at
A, take 80 ft., and have the 80 ft. mark held at B. Take the 50 ft. mark
and pull from A and B until the tape lies straight and even, you will
then have the point C perpendicular to AB. Continue straight lines by
sighting over two sticks in the well-known way.

_Another method_.--Stick a pin in each corner of a square board, and
look diagonally across them, first in the direction of the line to which
you wish to run at right angles, and then for the new line sight across
the other two pins.

A SIMPLE LEVELLING INSTRUMENT

Fasten a common carpenter's square in a slit to the top of a stake by
means of a screw, and then tie a plumb-line at the angle so that it
may hang along the short arm, when the plumb-line hangs vertically
and sights may be taken over it. A carpenter's spirit-level set on an
adjustable stand will do as well. The other arm will then be a level.

Another very simple, but effective, device for finding a level line is
by means of a triangle of wood made of half-inch boards from 9 to 12
ft. long. To make the legs level, set the triangle up on fairly level
ground, suspend a plummet from the top and mark on the cross-piece where
the line touches it. Then reverse the triangle, end for end, exactly,
and mark the new line the plumb-line makes. Now make a new mark exactly
half way between the two, and when the plumb-line coincides with this,
the two legs are standing on level ground. For short water races this is
a very handy method of laying out a level line.

TO MEASURE THE HEIGHT OF A STANDING TREE

Take a stake about your own height, and walking from the butt of the
tree to what you judge to be the height of the timber portion you want,
drive your stake into the ground till the top is level with your eyes;
now lie straight out on your back, placing your feet against the stake,
and sight a point on the tree. AB equals BC. If BC is, say 40 ft., that
will be the height of your "stick of timber." Thus, much labour may be
saved in felling trees the timber portion of which may afterwards be
found to be too short for your purpose.

LEVELLING BY ANEROID BAROMETER

This should be used more for ascertaining relatively large differences
in altitudes than for purposes where any great nicety is required.
For hills under 2000 ft., the following rule will give a very close
approximation, and is easily remembered, because 55 degrees, the assumed
temperature, agrees with 55 degrees, the significant figures in the
55,000 factor, while the fractional correction contains _two fours_.

Observe the altitudes and also the temperatures on the Fahrenheit
thermometer at top and bottom respectively, of the hill, and take the
mean between them. Let B represent the mean altitude and b the mean
temperature. Then 55000 X B - b/B + b = height of the hill in feet for
the temperature of 55 degrees. Add 1/440 of this result for every degree
the mean temperature exceeds 55 degrees; or subtract as much for every
degree below 55 degrees.

TO DETERMINE HEIGHTS OF OBJECTS

_By Shadows_

Set up vertically a stick of known length, and measure the length of its
shadow upon a horizontal or other plane; measure also the length of
the shadow thrown by the object whose height is required. Then it will
be:--As the length of the stick's shadow is to the length of the stick
itself, so is the length of the shadow of the object to the object's
height.

_By Reflection_

Place a vessel of water upon the ground and recede from it until you see
the top of the object reflected from the surface of the water. Then it
will be:--As your horizontal distance from the point of reflection is
to the height of your eye above the reflecting surface, so is the
horizontal distance of the foot of the object from the vessel to its
altitude above the said surface.

_Instrumentally_

Read the vertical angle, and multiply its natural tangent by the
distance between instrument and foot of object; the result is the
height.

When much accuracy is not required vertical angles can be measured by
means of a quadrant of simple construction. The arc AB is a quadrant,
graduated in degrees from B to A; C, the point from which the plummet P
is suspended, being the centre of the quadrant.

_When_ the sights AC are directed towards any object, S, the degrees
in the arc, BP, are the measure of the angle of elevation, SAD, of the
object.

TO FIND THE DEPTH OF A SHAFT

_Rule_:--Square the number of seconds a stone takes to reach the bottom
and multiply by 16.

Thus, if a stone takes 5 seconds to fall to the bottom of a shaft--

5 squared = 25; and 25 X 16 = 400 feet, the required depth of shaft.

DESCRIPTION OF PLAN FOR RE-USING WATER

Where water is scarce it may be necessary to use it repeatedly. In a
case of this kind in Egypt, the Arab miners have adopted an ingenious
method which may be adapted to almost any set of conditions. At a is a
sump or water-pit; b is an inclined plane on which the mineral is washed
and whence the water escapes into a tank c; d is a conduit for taking
the water back to a; e is a conduit or lever pump for raising the
water. A certain amount of filtration could easily be managed during the
passage from c to a.

COOLING COMPOUND FOR HEATED BEARINGS

Mercurial ointment mixed with black cylinder oil and applied every
quarter of an hour, or as often as expedient. The following is also
recommended as a good cooling compound for heavy bearings:--Tallow 2
lb., plumbage 6 oz., sugar of lead 4 oz. Melt the tallow with gentle
heat and add the other ingredients, stirring until cold.

CLEANING GREASY PLUMMER BLOCKS

When, through carelessness or unpreventable cause, plummer blocks
and other detachable portions of machinery become clogged with sticky
deposits of grease and impurities, a simple mode of cleansing the same
is to take about 1000 parts by weight of boiling water, to which add
about 10 or 15 parts of ordinary washing soda. Keep the water on the
boil and place therein the portions of the machine that are to be
cleaned; this treatment has the effect of quickly loosening all grease,
oil, and dirt, after which the metal is thoroughly washed and dried. The
action of the lye is to form with the grease a soap soluble in water. To
prevent lubricating oil hardening upon the parts of the machinery when
in use, add a third part of kerosene.

AN EXCELLENT ANTI-FRICTION COMPOUND

For use on cams and stamper shanks, which will be harmless should it
drop into the mortar or stamper boxes, is graphite (black-lead) and
soft soap. When the guides are wooden, the soft soap need not be added;
black-lead made into a paste with water will act admirably.

TO CLEAN BRASS

Oxalic acid 1 oz., rotten stone 6 oz., powdered gum arabic 1/2 oz.,
sweet oil 1 oz. Rub on with a piece of rag.

A SOLVENT FOR RUST

It is often very difficult, and sometimes impossible, to remove rust
from articles made of iron. Those which are very thickly coated are
most easily cleaned by being immersed in a nearly saturated solution
of chloride of tin. The length of time they remain in this bath is
determined by the thickness of the coating of rust. Generally from
twelve to twenty-four hours is long enough.

TO PROTECT IRON AND STEEL FROM RUST

The following method is but little known, although it deserves
preference over many others. Add 7 oz. of quicklime to 1 3/4 pints
of cold water. Let the mixture stand until the supernatant fluid is
entirely clear. Then pour this off, and mix with it enough olive oil
to form a thick cream, or rather to the consistency of melted and
re-congealed butter. Grease the articles of iron or steel with this
compound, and then wrap them up in paper, or if this cannot be done,
apply the mixture somewhat more thickly.

TO KEEP MACHINERY FROM RUSTING

Take 1 oz. of camphor, dissolve it in 1 lb. of melted lard; mix with
it (after removing the scum) as much fine black-lead as will give it an
iron colour; clean the machinery, and smear it with this mixture. After
twenty-four hours rub off and clean with soft, linen cloth. This mixture
will keep machinery clean for months under ordinary circumstances.

FIRE-LUTE

An excellent fire-lute is made of eight parts sharp sand, two parts good
clay, and one part horse-dung; mix and temper like mortar.

ROPE-SPLICING

A short splice is made by unlaying the ends of two pieces of rope to a
sufficient length, then interlaying them, draw them close and push the
strands of one under the strands of the other several times. This
splice makes a thick lump on the rope and is only used for slings,
block-straps, cables, etc.





End of the Project Gutenberg EBook of Getting Gold, by J. C. F. Johnson

*** END OF THIS PROJECT GUTENBERG EBOOK GETTING GOLD ***

***** This file should be named 3679.txt or 3679.zip *****
This and all associated files of various formats will be found in:
        http://www.gutenberg.org/3/6/7/3679/

Produced by Dagny; John Bickers; David Widger

Updated editions will replace the previous one--the old editions
will be renamed.

Creating the works from public domain print editions means that no
one owns a United States copyright in these works, so the Foundation
(and you!) can copy and distribute it in the United States without
permission and without paying copyright royalties.  Special rules,
set forth in the General Terms of Use part of this license, apply to
copying and distributing Project Gutenberg-tm electronic works to
protect the PROJECT GUTENBERG-tm concept and trademark.  Project
Gutenberg is a registered trademark, and may not be used if you
charge for the eBooks, unless you receive specific permission.  If you
do not charge anything for copies of this eBook, complying with the
rules is very easy.  You may use this eBook for nearly any purpose
such as creation of derivative works, reports, performances and
research.  They may be modified and printed and given away--you may do
practically ANYTHING with public domain eBooks.  Redistribution is
subject to the trademark license, especially commercial
redistribution.



*** START: FULL LICENSE ***

THE FULL PROJECT GUTENBERG LICENSE
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK

To protect the Project Gutenberg-tm mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase "Project
Gutenberg"), you agree to comply with all the terms of the Full Project
Gutenberg-tm License (available with this file or online at
http://gutenberg.org/license).


Section 1.  General Terms of Use and Redistributing Project Gutenberg-tm
electronic works

1.A.  By reading or using any part of this Project Gutenberg-tm
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement.  If you do not agree to abide by all
the terms of this agreement, you must cease using and return or destroy
all copies of Project Gutenberg-tm electronic works in your possession.
If you paid a fee for obtaining a copy of or access to a Project
Gutenberg-tm electronic work and you do not agree to be bound by the
terms of this agreement, you may obtain a refund from the person or
entity to whom you paid the fee as set forth in paragraph 1.E.8.

1.B.  "Project Gutenberg" is a registered trademark.  It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement.  There are a few
things that you can do with most Project Gutenberg-tm electronic works
even without complying with the full terms of this agreement.  See
paragraph 1.C below.  There are a lot of things you can do with Project
Gutenberg-tm electronic works if you follow the terms of this agreement
and help preserve free future access to Project Gutenberg-tm electronic
works.  See paragraph 1.E below.

1.C.  The Project Gutenberg Literary Archive Foundation ("the Foundation"
or PGLAF), owns a compilation copyright in the collection of Project
Gutenberg-tm electronic works.  Nearly all the individual works in the
collection are in the public domain in the United States.  If an
individual work is in the public domain in the United States and you are
located in the United States, we do not claim a right to prevent you from
copying, distributing, performing, displaying or creating derivative
works based on the work as long as all references to Project Gutenberg
are removed.  Of course, we hope that you will support the Project
Gutenberg-tm mission of promoting free access to electronic works by
freely sharing Project Gutenberg-tm works in compliance with the terms of
this agreement for keeping the Project Gutenberg-tm name associated with
the work.  You can easily comply with the terms of this agreement by
keeping this work in the same format with its attached full Project
Gutenberg-tm License when you share it without charge with others.

1.D.  The copyright laws of the place where you are located also govern
what you can do with this work.  Copyright laws in most countries are in
a constant state of change.  If you are outside the United States, check
the laws of your country in addition to the terms of this agreement
before downloading, copying, displaying, performing, distributing or
creating derivative works based on this work or any other Project
Gutenberg-tm work.  The Foundation makes no representations concerning
the copyright status of any work in any country outside the United
States.

1.E.  Unless you have removed all references to Project Gutenberg:

1.E.1.  The following sentence, with active links to, or other immediate
access to, the full Project Gutenberg-tm License must appear prominently
whenever any copy of a Project Gutenberg-tm work (any work on which the
phrase "Project Gutenberg" appears, or with which the phrase "Project
Gutenberg" is associated) is accessed, displayed, performed, viewed,
copied or distributed:

This eBook is for the use of anyone anywhere at no cost and with
almost no restrictions whatsoever.  You may copy it, give it away or
re-use it under the terms of the Project Gutenberg License included
with this eBook or online at www.gutenberg.org

1.E.2.  If an individual Project Gutenberg-tm electronic work is derived
from the public domain (does not contain a notice indicating that it is
posted with permission of the copyright holder), the work can be copied
and distributed to anyone in the United States without paying any fees
or charges.  If you are redistributing or providing access to a work
with the phrase "Project Gutenberg" associated with or appearing on the
work, you must comply either with the requirements of paragraphs 1.E.1
through 1.E.7 or obtain permission for the use of the work and the
Project Gutenberg-tm trademark as set forth in paragraphs 1.E.8 or
1.E.9.

1.E.3.  If an individual Project Gutenberg-tm electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any additional
terms imposed by the copyright holder.  Additional terms will be linked
to the Project Gutenberg-tm License for all works posted with the
permission of the copyright holder found at the beginning of this work.

1.E.4.  Do not unlink or detach or remove the full Project Gutenberg-tm
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg-tm.

1.E.5.  Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg-tm License.

1.E.6.  You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including any
word processing or hypertext form.  However, if you provide access to or
distribute copies of a Project Gutenberg-tm work in a format other than
"Plain Vanilla ASCII" or other format used in the official version
posted on the official Project Gutenberg-tm web site (www.gutenberg.org),
you must, at no additional cost, fee or expense to the user, provide a
copy, a means of exporting a copy, or a means of obtaining a copy upon
request, of the work in its original "Plain Vanilla ASCII" or other
form.  Any alternate format must include the full Project Gutenberg-tm
License as specified in paragraph 1.E.1.

1.E.7.  Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg-tm works
unless you comply with paragraph 1.E.8 or 1.E.9.

1.E.8.  You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg-tm electronic works provided
that

- You pay a royalty fee of 20% of the gross profits you derive from
     the use of Project Gutenberg-tm works calculated using the method
     you already use to calculate your applicable taxes.  The fee is
     owed to the owner of the Project Gutenberg-tm trademark, but he
     has agreed to donate royalties under this paragraph to the
     Project Gutenberg Literary Archive Foundation.  Royalty payments
     must be paid within 60 days following each date on which you
     prepare (or are legally required to prepare) your periodic tax
     returns.  Royalty payments should be clearly marked as such and
     sent to the Project Gutenberg Literary Archive Foundation at the
     address specified in Section 4, "Information about donations to
     the Project Gutenberg Literary Archive Foundation."

- You provide a full refund of any money paid by a user who notifies
     you in writing (or by e-mail) within 30 days of receipt that s/he
     does not agree to the terms of the full Project Gutenberg-tm
     License.  You must require such a user to return or
     destroy all copies of the works possessed in a physical medium
     and discontinue all use of and all access to other copies of
     Project Gutenberg-tm works.

- You provide, in accordance with paragraph 1.F.3, a full refund of any
     money paid for a work or a replacement copy, if a defect in the
     electronic work is discovered and reported to you within 90 days
     of receipt of the work.

- You comply with all other terms of this agreement for free
     distribution of Project Gutenberg-tm works.

1.E.9.  If you wish to charge a fee or distribute a Project Gutenberg-tm
electronic work or group of works on different terms than are set
forth in this agreement, you must obtain permission in writing from
both the Project Gutenberg Literary Archive Foundation and Michael
Hart, the owner of the Project Gutenberg-tm trademark.  Contact the
Foundation as set forth in Section 3 below.

1.F.

1.F.1.  Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
public domain works in creating the Project Gutenberg-tm
collection.  Despite these efforts, Project Gutenberg-tm electronic
works, and the medium on which they may be stored, may contain
"Defects," such as, but not limited to, incomplete, inaccurate or
corrupt data, transcription errors, a copyright or other intellectual
property infringement, a defective or damaged disk or other medium, a
computer virus, or computer codes that damage or cannot be read by
your equipment.

1.F.2.  LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right
of Replacement or Refund" described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg-tm trademark, and any other party distributing a Project
Gutenberg-tm electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees.  YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH F3.  YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.

1.F.3.  LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from.  If you
received the work on a physical medium, you must return the medium with
your written explanation.  The person or entity that provided you with
the defective work may elect to provide a replacement copy in lieu of a
refund.  If you received the work electronically, the person or entity
providing it to you may choose to give you a second opportunity to
receive the work electronically in lieu of a refund.  If the second copy
is also defective, you may demand a refund in writing without further
opportunities to fix the problem.

1.F.4.  Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you 'AS-IS' WITH NO OTHER
WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR ANY PURPOSE.

1.F.5.  Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of damages.
If any disclaimer or limitation set forth in this agreement violates the
law of the state applicable to this agreement, the agreement shall be
interpreted to make the maximum disclaimer or limitation permitted by
the applicable state law.  The invalidity or unenforceability of any
provision of this agreement shall not void the remaining provisions.

1.F.6.  INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg-tm electronic works in accordance
with this agreement, and any volunteers associated with the production,
promotion and distribution of Project Gutenberg-tm electronic works,
harmless from all liability, costs and expenses, including legal fees,
that arise directly or indirectly from any of the following which you do
or cause to occur: (a) distribution of this or any Project Gutenberg-tm
work, (b) alteration, modification, or additions or deletions to any
Project Gutenberg-tm work, and (c) any Defect you cause.


Section  2.  Information about the Mission of Project Gutenberg-tm

Project Gutenberg-tm is synonymous with the free distribution of
electronic works in formats readable by the widest variety of computers
including obsolete, old, middle-aged and new computers.  It exists
because of the efforts of hundreds of volunteers and donations from
people in all walks of life.

Volunteers and financial support to provide volunteers with the
assistance they need, is critical to reaching Project Gutenberg-tm's
goals and ensuring that the Project Gutenberg-tm collection will
remain freely available for generations to come.  In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg-tm and future generations.
To learn more about the Project Gutenberg Literary Archive Foundation
and how your efforts and donations can help, see Sections 3 and 4
and the Foundation web page at http://www.pglaf.org.


Section 3.  Information about the Project Gutenberg Literary Archive
Foundation

The Project Gutenberg Literary Archive Foundation is a non profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service.  The Foundation's EIN or federal tax identification
number is 64-6221541.  Its 501(c)(3) letter is posted at
http://pglaf.org/fundraising.  Contributions to the Project Gutenberg
Literary Archive Foundation are tax deductible to the full extent
permitted by U.S. federal laws and your state's laws.

The Foundation's principal office is located at 4557 Melan Dr. S.
Fairbanks, AK, 99712., but its volunteers and employees are scattered
throughout numerous locations.  Its business office is located at
809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887, email
business@pglaf.org.  Email contact links and up to date contact
information can be found at the Foundation's web site and official
page at http://pglaf.org

For additional contact information:
     Dr. Gregory B. Newby
     Chief Executive and Director
     gbnewby@pglaf.org


Section 4.  Information about Donations to the Project Gutenberg
Literary Archive Foundation

Project Gutenberg-tm depends upon and cannot survive without wide
spread public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine readable form accessible by the widest
array of equipment including outdated equipment.  Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.

The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States.  Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements.  We do not solicit donations in locations
where we have not received written confirmation of compliance.  To
SEND DONATIONS or determine the status of compliance for any
particular state visit http://pglaf.org

While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.

International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States.  U.S. laws alone swamp our small staff.

Please check the Project Gutenberg Web pages for current donation
methods and addresses.  Donations are accepted in a number of other
ways including checks, online payments and credit card donations.
To donate, please visit: http://pglaf.org/donate


Section 5.  General Information About Project Gutenberg-tm electronic
works.

Professor Michael S. Hart is the originator of the Project Gutenberg-tm
concept of a library of electronic works that could be freely shared
with anyone.  For thirty years, he produced and distributed Project
Gutenberg-tm eBooks with only a loose network of volunteer support.


Project Gutenberg-tm eBooks are often created from several printed
editions, all of which are confirmed as Public Domain in the U.S.
unless a copyright notice is included.  Thus, we do not necessarily
keep eBooks in compliance with any particular paper edition.


Most people start at our Web site which has the main PG search facility:

     http://www.gutenberg.org

This Web site includes information about Project Gutenberg-tm,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.